Hey bro good video on the rear end on that ATV I hope you use some RTV around everything cuz that helps keep that water out cuz that thing was full water bro but just to let you know use some RTV around it real good it'll help I promise you and keep the water out Good luck
Diving in pretty deep on this one. I don't know much about ATV diffs, but I've done a lot of automotive diffs. Based on that, I would think there would be some provision for adjusting the mesh and backlash on the gears. That nut you made the tool for probably has something to do with it. Those hypoid gearsets are quite sensitive to being set up properly and can eat themselves up if not set correctly. Maybe it's not a thing on an ATV, but I suspect it is. Time will tell I guess, and I think I'd be watching ebay for a good used, complete diff.
Thanks for the insight! This crossed my mind while putting it back together as in the past I gave too many ugga dugga's to a part (can't remember exactly what it was now) and it wouldn't turn. However, after the two bearings for the main shaft were seated, there really wasn't anything to adjust. Same goes for the large gear. I also couldn't find any info suggesting an adjustment. But, I guess I will find out eventually. And yes, my plan is to find another diff and throw it on the shelf until needed, another 4wheerler is also on the list so I have a spare when one breaks down.
Hopefully it works out ok. Powersports Nation in Norfolk parts out something like 40 ATVs per week and may be a good source of used parts for that machine.
Awesome informative video I just did the same job on a 400
Thanks. Wasn’t quite as hard as I thought it would be.
Hey bro good video on the rear end on that ATV I hope you use some RTV around everything cuz that helps keep that water out cuz that thing was full water bro but just to let you know use some RTV around it real good it'll help I promise you and keep the water out Good luck
How did you get the speedometer gear out. The fastword made it hard to see
Diving in pretty deep on this one. I don't know much about ATV diffs, but I've done a lot of automotive diffs. Based on that, I would think there would be some provision for adjusting the mesh and backlash on the gears. That nut you made the tool for probably has something to do with it.
Those hypoid gearsets are quite sensitive to being set up properly and can eat themselves up if not set correctly. Maybe it's not a thing on an ATV, but I suspect it is. Time will tell I guess, and I think I'd be watching ebay for a good used, complete diff.
Thanks for the insight! This crossed my mind while putting it back together as in the past I gave too many ugga dugga's to a part (can't remember exactly what it was now) and it wouldn't turn. However, after the two bearings for the main shaft were seated, there really wasn't anything to adjust. Same goes for the large gear. I also couldn't find any info suggesting an adjustment. But, I guess I will find out eventually. And yes, my plan is to find another diff and throw it on the shelf until needed, another 4wheerler is also on the list so I have a spare when one breaks down.
Hopefully it works out ok. Powersports Nation in Norfolk parts out something like 40 ATVs per week and may be a good source of used parts for that machine.
Nice!
What gear oil did you put in it - 75W-90 ??
Сколька такой квадр стоит в рублях можэте сказать заранее благодарю