I especially like the cam. I've been trying to figure out how to make a magnetic base for my drill guide that I can engage and disengage with a knob or switch and this feels like a clue. Great free hand curves, too. Thank you for sharing!
Soy de CUBA,felicidadez por todas las ideas.Estoy pensando armar una cierra de banco cacera desde 0 ,solo tengo un motor de 1Hp y 3200rpm .espero que me quede como a usted gracias.Cuando la ternine le mando el video.
when you cut long boards, thick timbers, cut up bigger pieces and that sort of things if you have the wrong fence setting things the blade jams or make kickback because wood have tensions and have no room to expand because the fence runs the whole lenght of the table.
The saw fence is to long and dangerous to use it may never go past the center of the blade. The end of the saw fence should be about 2/3 from the center of the blade. Wood pieces can have some nasty kickback and hurt you very BAD and your can get ugly burn marks on the wood. Im a trained and proffesionel wood machinist and have seen what a bad fence setting can do.
會回彈以及灼傷痕跡是因為Saw fence 和刀片不平行，與長度無關，請調整平行度。 Springback and burn marks are caused because the Saw fence and the blade are not parallel, regardless of the length, please adjust the parallelism.
如果您對木作相關有任何問題或建議，歡迎底下留言討論！！
If you have any question or you would like to have a discussion about woodworking process,
please leave a message below.🤓
Wow! Absolutely love it. I am subscribed to follow your old and new videos. Greetings from México!
Thanks for the video my friend your insightful approach to woodwork has helped me a great deal, especially installing the ‘cam’ mechanism 🎉🎉🎉
very good idea. thanks for sharing.
Really like this ! Do you have Plans you could share with me ?
I especially like the cam. I've been trying to figure out how to make a magnetic base for my drill guide that I can engage and disengage with a knob or switch and this feels like a clue.
Great free hand curves, too. Thank you for sharing!
Thanks, i'm glad that this video can help you 😀
Bellissimo lavoro. HO appena copiato il tuo progetto e funziona alla grande. Un grande grazie dall'Italia, amico mio.
Thanks very much. glad you're enjoying the videos！😃
Bel lavoro complimenti 👍👍👏👏👏
Excelente video
Soy de CUBA,felicidadez por todas las ideas.Estoy pensando armar una cierra de banco cacera desde 0 ,solo tengo un motor de 1Hp y 3200rpm .espero que me quede como a usted gracias.Cuando la ternine le mando el video.
This is level above hobby level, i like it. Massive respect from Serbia!
Thanks very much. glad you're enjoying the videos！😃
영상 감사합니다.
항상 건강하세요
Thanks very much. glad you're enjoying the videos！😃
Hi Mr.V how are you, thanks for your tutorial, please put pattern(plan) if you can.
被官方推薦爆流量了耶
對阿...但剛看後台明顯的掉了，推播結束了😥
Wao. This is more than craft work. Any plans available please?
Nice craft
Thanks very much. glad you're enjoying the videos！😃
Gostei desse seu gato ajudante
demasiada tecnologia, solo para la gente con muchos billetes, asi es la vida.
我的鋸台也是GTS1031，請問您是如何校正鋸片的切割精度？依照使用手冊上的說明調整多次，結果總是無法非常滿意…可以的話還請賜教，謝謝！
when you cut long boards, thick timbers, cut up bigger pieces and that sort of things if you have the wrong fence setting things the blade jams or make kickback because wood have tensions and have no room to expand because the fence runs the whole lenght of the table.
Wow, so cool 👍♥️
Thank you😀
請教您的鋸片是哪個牌子? 在哪買的!
Where can I buy a meter roll like in your video, thanks
You cut metal with your saw? WTH
請問一下,為什麼你們的木材都是直的,平的,我的都是不平,,是有方法壓平,還是根本就是木材行都給我人家不要的木板
你沒有買刨光機嗎
請問8:07處 貼在木材上的尺叫什麼名字? 那裡買? 謝謝。
@oz frank OK, 3Q
請問這種木頭的名稱是什麼?是原木嗎?要向建材行叫貨該怎麼說，自己也喜歡DIY但剛入門叫木料常碰壁...
這是雲杉，原木來話算是很經濟實惠的，但硬度低QQ~
我是直接和木工廠叫，你可以找”jfg木材批發“
也可以至FB找”原木材料DIY木工坊“及”原木料板材....“等社團
會有前輩在販賣各種原木大小料
@@mr.v4702 你好請問5:31放在上那個五金是什麼名字?如果用有牙的會影響使用嗎?還有請問這靠山牢固嗎，之前我做一個靠山但和影片中不同雖然手搖動很緊但是常常不小心拿木頭時撞到沒注意就會稍微跑掉...
@@林郁智-x2o 叫“六角半牙螺絲”。
無牙部份會接觸木料，用有牙久了會因磨損導至洞孔越來越大
靠山牢固部分個人覺得還可以，但一樣不能撞到（它算是用夾緊的方式），想要很牢固就需要善用金屬零件或用鎖的方式
@@mr.v4702 感恩，自己默默玩沒人可請教..感謝你耐心賜教~~
@@林郁智-x2o 別那麼客氣，大家互相學習^^
The saw fence is to long and dangerous to use it may never go past the center of the blade. The end of the saw fence should be about 2/3 from the center of the blade. Wood pieces can have some nasty kickback and hurt you very BAD and your can get ugly burn marks on the wood. Im a trained and proffesionel wood machinist and have seen what a bad fence setting can do.
會回彈以及灼傷痕跡是因為Saw fence 和刀片不平行，與長度無關，請調整平行度。
Springback and burn marks are caused because the Saw fence and the blade are not parallel, regardless of the length, please adjust the parallelism.