95% of the people who watch this video is not subscribed and are returning viewers...Thanks to all of you who leave a like and subscribe to the channel!
I followed what you were saying last time and tried the community shaders and honestly the wet surface effects nearly made me cry. I saw the rain on my followers skin and held his hand up to my eyes with vrik to look at the water glinting. I'm not running the full modlist but even just the lighting and how the grass is trodden as the npcs walk on it. It's a must have to see those effects. Amazing work
@@GT1GT hey, thanks for subbing but, just to be clear, it’s not me that modded the game! I am just a user!!! There are hundreds of talented people that worked on their passion project to make this game what it is today. The modlist creator then collected all the mods and compiled it into a stable package avoiding us the pain to go through all the installation instruction of every single mod. So credit to the community shaders team, the modding community and the modlist creator :)
I have a 5700x3d and 12gb 4070 super. Running at a nearly consistent 90 fps on high/ or ultra resolution on open composite and virtural desktop. SSW enabled ,hevc 10bit. Quest 3 w/ dedicated wifi 6 router. Also using process lasso to set virtual desktop and skyrimvr processes to always be high priority. It looks pretty damn good. VRAMR or cathedral assets optimizer (or combination of both) are a must to play on any decently high settings without getting vram related crashes on a 12gb card in my experience. VRAMR will bring vram usage down about 1gb using the quality preset, which you pretty much won't notice graphics wise. However I've used a combination of VRAMR quality preset AND CAO on my game and you can get the vram usage down to an insanely low 7 or 8 gb while maintaining most of the beauty of the modpack and greatly improving performance and load times. That requires using vramr to work its magic on the base game textures and cathedral assets optimizer to bring all of the mod textures down to 1024x1024. ( I don't suggest using CAO to unpack base game textures and optimize them). Using CAO to compress everything to 2048x2048 textures does look noticeably better than 1024x1024 but you'll still hover 10 gb of vram after that and get a good bit less performance and slower load times. I imagine you could just try a lower quality setting on vramr and get similar results but I have not tried that yet as I like the additional optimization and fixes that CAO provides. TLDR- make a backup of your entire installed modpack/base game and experiment with vramr and cathedral assets optimizer for insane performance boosts.
Don't do av1 do 264+ and push the mb to 400. That's what I do and have the quest 3 with wyze 6e router 4070 ti super. Looks alot better and less latency. I run it at 120fps at ultra settings. Also no ssw.
@@gatgat00tweed78 I've experimented with all the codecs and struggle to use 264+ without stuttering. Do I understand correctly that 6e routers have a 6ghz band? Mine is only wifi 6- 5ghz. Maybe thats why it doesnt work well for me. Or maybe its hardware related. 4070 ti super is a good bit better gpu.
@elijah9640 I use to use wifi 5 and same thing. Another thing is make sure it's on the same network and that it's not being used alot. Av1 adds more latency even though it has less bitrate. I tried them all too and most posts say to use 264+ and crank bitrate up.
This modpack looks absolutely stunning. I thought I was special when I copped a good enb someone made for nice lighting and visuals, but this is puts my list to shame yet at awe at the true potentials of what can be put together. Skyrim is a fantasy game which the creators knew the players enjoyed using their freedom and ideas to modify and/or exploit the game to accommodate their play styles, and the visuals here really set that feel. Really sets the standard for what vr and hardware is capable of, and makes me really excited for the future of vr and modding this god forsaken game time and time again as a whole. Amazing showcase, beautiful modpack, keep it up. 👍
@@VRDaD If you make a tutorial would it be possible that you also tell which mods are enabled/disabled in the version you show in the video? I'm also interested what settings were used for the landscape between 0:18-0:22? It looks kinda bloomy and I really love that! I haven't seen such in 3.0 or at least I don't know the settings for that. Thank you!
Skyrim VR is peak game - it is the greatest game experience of all time -and nothing in the past 10-15 years can match it. Thank you Bethesda for giving us this.
I've been playing with the latest version of Community Shaders together with Light placer and PBR textures for some time now and although visuals are much better there are some serious bugs around various components of CS especially for VR. Some of them can be avoided by turning specific features off but some of them needs to be fixed in the code. In my case PBR didn't cause any performnce loss but Light placer did considerably. You mentioned Lux in the video but I think it's light placer. It's actually based on vanilla lightning system and replacement for Lux and all ENB light stuff.
@@mray3308 thanks for the clarification. I got the info from the release note. I am not super expert on each mod. Yes light do reduce performance, but we will get to a point where we can optimise stuff.
@@VRDaD Yes and I have but just yesterday I went in a cave to rescue a priest for Molog Bal and 2 of the forsworn were naked and going at it across the room as soon as I entered before I attacked. I find it difficult to turn it all off and would greatly prefer a SFW version where I don't have to worry about it being silly anime porn all over. I already have to make changes to the bodies so the women aren't all ridiculously huge chests that are jiggling in every direction even when they are sitting still. Its a lot of work to try to get it halfway decent without the SFW normal version
@@VRDaD Very Good. I used to mod the hell out of my Skyrim VR manually, but a couple years back something happened that made the game keep crashing, and before I could fix that, my whole PC blew up. Not wanting to start over from scratch, I just gave up for a few years. Now with Wabbajack, I'm going to get back into it. Hopefully I can add the Leia metal bikini mods and all the hot chick mods I used to use.
Looks significantly better on my PSVR2 over my Quest 3. Between the compression which Skyrim and Talos VR i seem to notice more and the new color palette looking more washed out than the PSVR2 OLED.
Love your Skyrim stuff! Makes me look forward to the next time I try Skyrim. Last time was on PSVR, so no mods then. Btw do you use additional mods with MGO? Perhaps a good idea for a video would be a presentation of other mods that work well in addition to the modlist?
Thanks for your comment :) I do use additional mods but not really important. I will make some videos exploring the mods that I believe being pretty awesome. I do have a couple already done about spells. Check them out!
Yeah, that's cool. I loved this mod list since the MO version, but now it's not working for AMD users. - the Moyse words :( I'm not a huge AMD fan, but I don't really want or need to upgrade my current 7900xtx anytime soon. It's working great. But CS.... sometimes I just hate CS
Dude, this looks so much better than ENB can do in (mainly because the VR ENB is lacking some important features). Meanwhile, Boris has posted a strange note on his ENB website explaining why Community Shaders is bad 🙄
@VRDaD on his website Enbdev (can't link directly, would be deleted by YT) he wrote a huge statement under headline "...you can read why ENBSeries is good and CS is bad."
I'm having a really annoying glitch. Whenever i'm in any menu, be it inventory or dialogue I can see what I can only describe as piece of broken glass that takes on the shape of things I can see on screen, sometimes its the joysticks other times its character models, the position changes based on where I move my head. As soon as I leave the menu its fine again. Also Mantella just comes up with an error whenever I try to talk to someone. Game looks fantastic though haha
Great video as always man! I have a question, do you know if these graphics and texture mods work with mods that lets you explore new places? like Bruma, Wyrmstooth, Beyond Reach and mods like that, thanks!
Always looks great but how's the mechanics and physics. I tried doing this before and it was kinda janky grabbing and swinging. If it had like blade and scorcery type stuff I would definitely do it.
@@gatgat00tweed78 plank+hggs+dismemberment mod its pretty damn fun you can grab them and chop their arms legs etc cant stop playing actually because of that combo its never gonna be like blade and sorcery physics but also blade and sorcery will never have a AAA open world and a AAA narative,blade and sorcery got the perfect physics but absolutely nothing else lol
Whenever I try to direct 3.5 Wabbajack installer on my 3.0 installation folders and check "overwrite files" In the end I get "Error, one or more files could not be downloaded". I have Nexus Premium, I tried it several times, but same result.
@@VRDaD I tried "verify files" and now I can open mod organiser., but at the top I see "1507 mods active". Is it right? As far as I remember at 3.0 there were about 1900 mods active at the start after clean install.
Very cool! I have a doubth. Is it using both, ENB and Community Shaders at the same time? Or you switch from one to the other depending on which effects you prefer? Because, to my knowledge, it was not possible to have them both working at the same time (though you can have them installed). And other question... Do you have parallax on terrain? (all of it, not just roads). I have tried many ways (not with community shaders), but has been not possible.
@@VRDaD Yes it is! I finally switched to to CS... I still miss some ENB features, but... the CS water and the parallax on terrain on VR, is hard to ignore...
Cheers for the video. Just been trying 3.5 tonight for the first time. With default settings it is way better than the best I could get with 3.0. Still have very flat trees in the distance which seem to look way worse than yours. Any idea what might cause that?
@@ParaIelopiped from the MGO discord, in the announcements section. For the early access release it Otherwise wait for official release at the same link you went.
Oh i see. I'm not on discord, so will wait then. It will be my time for a fresh windows install😊 Everything allways works a bit smoother after reinstall. TBH, i'm affraid that something from earlyer Skyrim instalation can stay in the registry. Thanx for info😉
@ it shouldn’t matter if it was Skyrim vanilla. Nevertheless, remember to launch Skyrim vanilla at least once after a fresh install, otherwise wabbajack won’t find some necessary .ini files that it needs.
Hey VR Dad 😊 excited 2 try this new update. I love your content! Ive followed your guides to get MadGods overhaul and i love it. Its also my 1st time playing skyrim lol. How do i update to 3.5? Do i need to reinstall everything?
@@Flowlogic99 hey, thanks for sticking with me :) so to update, just download the new modlist. Then you launch wabbajack and you select it. Make sure you tick the box “overwrite installation “ before you press the play button. Unfortunately your previous save file is incompatible and you will have to start over again.
@@VRDaD No, unfortunately not. Can I do an update or do I have to delete the old one and download it again? And then I'll probably have to start a new game?
@@GelöschterGott you will definitely have to start a new game if you had a previous version. To update is very simple. Just download the new modlist and use wabbajack as before but be careful to check the box “overwrite installation”
@@VRDaD OK. is that the mod from January 12, 2025 with 1.8gb that I need? and I have mad god overhaul sfw and the other one is nsfw, would that work and is there a difference? sorry I hope I'm not annoying you too much, this is new territory for me
@ I think the safest bet is to download it from the link in the discord. When you join the MGO discord in the announcements section you will find what you need. Nsfw version is the one i recommend
Dear VR Dad! Would you be so kind to help me? I tried to ask my question on every forum, but nobody cared. In short, I would like to use Reshade. I have fresh install of SkyrimVR and also of MGO 3.5. I install Reshade as administrator, I select skyrimvr.exe, instalation done. Now if I check glamour reshade in mod organizer the launch window pops up for a brief second, but then it stops and the game won't launch. If I uncheck glamour reshade the game launches, but no sign of ReShade running in the game window. Interestingly, if I try to install Reshade again on skyrimvr.exe, the installer lets me to do it (when Reshade is installed properly, it would not let me install again, only repair or remove, but not in this case). It seems as if Reshade can not be installed or used properly, however, when the skyrimvr launcher starts up from mod organizer for a brief second and rootbuilder activates I see the Reshade files are there in my skyrimvr.exe folder. I used Reshade (also glamour) with MGO 3.0 and I did not have any issues. Please tell me what I do wrong, I would so much like to make it work, I spent a whole day with this and still no result. Thanks in advance!
@@VRDaD Thanks for your response! Please help me to understand. Are you sure about this? Because in MGO 3.0 I was using Reshade and CS simultaneously with no problem at all. Did you maybe try: in Mod Organizer if you turn glamour reshade on, in this case does glamour reshade only work for you if you use ENB instead of CS? Just because like I said, if I turn on glamour, the game will not launch in 3.5 and I only tried default settings yet, which is CS.
@@VRDaD Well, as soon as I get home I will try ENB if it works. with ReShade. Can I ask, in your opinion is the graphics quality significantly better with CS compared to ENB?
@@Szabby999 I like more CS tbh. There are too many good things compared to ENB. That's why you don't actually need Reshade. Just use CS with NAT3 or Azurite weather and it's incredibly good. I prefer NAT3 over Azurite, but it's a personal preference.
You're using wireless virtual desktop, correct? How can you have the bitrate at 120? If I go above 47 (auto bitrate) the game stutters and crashes almost right away. Thanks again buddy! (Edit: I use a 5Ghz starlink router, just ordered the 6Ghz so that'll prob help a lot)
@@MrColonelJag my bitrate is at 200Mbps. I disabled automatic bitrate. My router is connected to my pc via Ethernet cable and is dedicated to VR only. If you got a Wi-Fi 6 or 6E router you should be fine, as long as you connect it to the pc via Ethernet cable.
@ well I know there is the Skyrim together mod that you can use for it and you have to download a third party server hosting software I just wanted help figuring it out for the vr version
I literally bought a quest 3 a few weeks ago after stumbling upon your video for the 3.0 release. I installed everything and got it up and running, but as soon as I left the cave, my performance took an insane hit. I see people mentioning various tweeks and virtual desktop (maybe im stupid but i still dont know what this is - an ACTUAL virtual desktop or a program for vr?) and all this. I tried doing research for a few hours and became overwhelmed with all the information. Everybody seems to run fine on 4070ti's or 4070 supers, but unfortunately, i am running a base 4070. Are there any definitive guides per card, or is it just tweaking things until its playable? Also, is more than one ssd required, or can you create the folder on the root drive outside the programs folder?
I'm on a 4070 as well and the performance was just too rough. I just about decided to dismiss Skyrim VR completely and then I decided to try the FUS wabbajack and having actual 90fps makes it so I am actually enjoying it. I'm finally getting the "WOW I'm in virtual Skyrim" that everyone describes.
@@CadilakCoupe virtual desktop is a software thr you install on the quest, to connect the headset to your pc (you need also a streamer app on your pc). People connect it through (normally) a wifi6 or 6E router which is dedicated to the headset. The space required is around 400GB…
@VRDaD This is the part that confuses me. Is Rift Link not sufficient as this was my original method of getting it to work. Used Rift Link, switched to desktop display, and launched via a Wabba shortcut I placed on my desktop.
@michaelb2305 Does FUS sacrifice the beauty for the performance? Does it have the AI component that allows communication with the NPC's, and would you recommend it?
@ I recommend FUS for a more vanilla experience. Is no way close graphically to MGO. I don’t think it has AI as well. But it is very stable, performs well on lower end systems and has all the QoL improvements that are needed for an excellent Skyrim VR experience.
If you download the new modlist file and direct wabbajack to your original 3.0 downloads folder when installing 3.5 it should grab what it needs from there and download everything else it needs to install the new modpack.
There is one HUGE problem with these mind-blowing mods: They are made for the absolute enthusiast who doesn't settle for less than the absolute best. But here lies the problem. Being this type of enthusiast doesn't allow for enjoying something (no matter how good it is) knowing there is something better out there. Looking at the maddening frequency with which this god-tier mod here gets updated, I simply don't dare to start a run since I know the mod will be updated within a few weeks which means I will no longer be able to enjoy my walkthrough (knowing I am no longer playing the best version). If it's possible to always just update from your version to the newest one that's fine but that's not always the case.
@@lohan0903 I feel you. Restarting once again was a pain for me too 😂 BUT was totally worth it. I think we are reaching a point where save files that break is finishing and updating will be easier….or at least I hope so😅 alternatively, just do a play through and ignore future updates.
The colors look so bad.. I don’t get why people want their skyrim to look like willy wonka’s chocolate factory.. all the colors are so heavily saturated.. not for me, sorry.
@@freekjansen8451 personal preference I guess? There are other mod lists that give you a more vanilla experience if you like that. I would recommend FUS in that case.
@@SlyHaku the thing is it depends on weather! Sometimes there are scenes that are completely natural looking and sometimes those a bit more colorful . I like colorful more because I live in the grey UK...
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
95% of the people who watch this video is not subscribed and are returning viewers...Thanks to all of you who leave a like and subscribe to the channel!
Hai ragionissimo, mi sono accorto di non essere iscritto, fatto ☺
@ grazie! Apprezzo il tuo supporto ☺️
You truly are the major reference of this modlist with the work you put toward these videos!
I followed what you were saying last time and tried the community shaders and honestly the wet surface effects nearly made me cry. I saw the rain on my followers skin and held his hand up to my eyes with vrik to look at the water glinting. I'm not running the full modlist but even just the lighting and how the grass is trodden as the npcs walk on it. It's a must have to see those effects. Amazing work
@@areadhead yeah I should probably show more wetness effects in my next video…
You got me at Skyrim. Subbed for the great modding you have done. Will Need to try this 3.5 soon.
@@GT1GT hey, thanks for subbing but, just to be clear, it’s not me that modded the game! I am just a user!!! There are hundreds of talented people that worked on their passion project to make this game what it is today. The modlist creator then collected all the mods and compiled it into a stable package avoiding us the pain to go through all the installation instruction of every single mod. So credit to the community shaders team, the modding community and the modlist creator :)
That's crazy! Great game, great modders.
@@Serx1079 yep. A masterpiece.
Always top quality content, DaD ❤ I love to see your presentation. It's great stuff!
Smashing it as always man 🔥
@@DeadPixelGaming smashing is important 😂
You are the man! Great video!
@@VRNexusHub thanks for watching!
thank you for your efforts. my Big screen beyond VR is coming in a few weeks... i am beyond excited. take my damn like!
@@aw7614 I accept you damn like 😂 let me know how the headset is after you try it out.
Definitely wanna try it. See what it actually looks like in VR.
Clicked on this right away. Wabbajack is currently installing my mods haha
@@Arnoldsun1 nice! 😊
I have a 5700x3d and 12gb 4070 super. Running at a nearly consistent 90 fps on high/ or ultra resolution on open composite and virtural desktop. SSW enabled ,hevc 10bit. Quest 3 w/ dedicated wifi 6 router. Also using process lasso to set virtual desktop and skyrimvr processes to always be high priority.
It looks pretty damn good.
VRAMR or cathedral assets optimizer (or combination of both) are a must to play on any decently high settings without getting vram related crashes on a 12gb card in my experience.
VRAMR will bring vram usage down about 1gb using the quality preset, which you pretty much won't notice graphics wise.
However I've used a combination of VRAMR quality preset AND CAO on my game and you can get the vram usage down to an insanely low 7 or 8 gb while maintaining most of the beauty of the modpack and greatly improving performance and load times.
That requires using vramr to work its magic on the base game textures and cathedral assets optimizer to bring all of the mod textures down to 1024x1024. ( I don't suggest using CAO to unpack base game textures and optimize them).
Using CAO to compress everything to 2048x2048 textures does look noticeably better than 1024x1024 but you'll still hover 10 gb of vram after that and get a good bit less performance and slower load times.
I imagine you could just try a lower quality setting on vramr and get similar results but I have not tried that yet as I like the additional optimization and fixes that CAO provides.
TLDR- make a backup of your entire installed modpack/base game and experiment with vramr and cathedral assets optimizer for insane performance boosts.
Don't do av1 do 264+ and push the mb to 400. That's what I do and have the quest 3 with wyze 6e router 4070 ti super. Looks alot better and less latency. I run it at 120fps at ultra settings. Also no ssw.
@@gatgat00tweed78 I've experimented with all the codecs and struggle to use 264+ without stuttering. Do I understand correctly that 6e routers have a 6ghz band?
Mine is only wifi 6- 5ghz. Maybe thats why it doesnt work well for me. Or maybe its hardware related. 4070 ti super is a good bit better gpu.
@elijah9640 I use to use wifi 5 and same thing. Another thing is make sure it's on the same network and that it's not being used alot. Av1 adds more latency even though it has less bitrate. I tried them all too and most posts say to use 264+ and crank bitrate up.
@@elijah9640 thanks for this. I will look into it because it’s fundamentally necessary for people with mod-end systems
Would it still be usefull to use CAO if you have 24 GB of vram? (rtx 3090)
This is perfect timing for my new PC next week. Hopefully I can get everything working smoothly:)
@@TheMoonKingdom I hope you will enjoy as much as I do!
This modpack looks absolutely stunning.
I thought I was special when I copped a good enb someone made for nice lighting and visuals, but this is puts my list to shame yet at awe at the true potentials of what can be put together.
Skyrim is a fantasy game which the creators knew the players enjoyed using their freedom and ideas to modify and/or exploit the game to accommodate their play styles, and the visuals here really set that feel. Really sets the standard for what vr and hardware is capable of, and makes me really excited for the future of vr and modding this god forsaken game time and time again as a whole.
Amazing showcase, beautiful modpack, keep it up. 👍
@@greenmandude thank you for your awesome words!
Can you give a tutorial on how to update the mods if we already have 3.0 and are right in the middle of a run?
Yes, that would be great!
@@aaronfernie ok I will make a quick tutorial. Non problem.
@@VRDaD If you make a tutorial would it be possible that you also tell which mods are enabled/disabled in the version you show in the video? I'm also interested what settings were used for the landscape between 0:18-0:22? It looks kinda bloomy and I really love that! I haven't seen such in 3.0 or at least I don't know the settings for that. Thank you!
@ you rock
@@aaronfernie the only problem is…yoj will need to restart anyway. 3.5 save file is incompatible with 3.0
Skyrim VR is peak game - it is the greatest game experience of all time -and nothing in the past 10-15 years can match it. Thank you Bethesda for giving us this.
@@007feck yeah…there is a reason why thousands of mods exist nowadays. It’s truly a masterpiece.
I am playing 3.5 MGO and i must agree with you. Its another lvl of gaming. I am wonder how it will look in NEXT oraz 3 year.
@@wlodar001 omg can’t wait to see where we’re going with this.
I've been playing with the latest version of Community Shaders together with Light placer and PBR textures for some time now and although visuals are much better there are some serious bugs around various components of CS especially for VR. Some of them can be avoided by turning specific features off but some of them needs to be fixed in the code. In my case PBR didn't cause any performnce loss but Light placer did considerably. You mentioned Lux in the video but I think it's light placer. It's actually based on vanilla lightning system and replacement for Lux and all ENB light stuff.
@@mray3308 thanks for the clarification. I got the info from the release note. I am not super expert on each mod. Yes light do reduce performance, but we will get to a point where we can optimise stuff.
Can't wait for them to drop the SFW version of 3.5
@@bobbywhite1645 you can use the nsfw without doing any of the nsfw stuff though.
@@VRDaD Yes and I have but just yesterday I went in a cave to rescue a priest for Molog Bal and 2 of the forsworn were naked and going at it across the room as soon as I entered before I attacked. I find it difficult to turn it all off and would greatly prefer a SFW version where I don't have to worry about it being silly anime porn all over. I already have to make changes to the bodies so the women aren't all ridiculously huge chests that are jiggling in every direction even when they are sitting still. Its a lot of work to try to get it halfway decent without the SFW normal version
Omg, i never expected cs to surpass enb. Bravo to them
Yep. It happened.
This video has effected my nether regions. :)
@@VanGohman is that a good thing or a bad thing? 😂
@@VRDaD Very Good. I used to mod the hell out of my Skyrim VR manually, but a couple years back something happened that made the game keep crashing, and before I could fix that, my whole PC blew up. Not wanting to start over from scratch, I just gave up for a few years. Now with Wabbajack, I'm going to get back into it. Hopefully I can add the Leia metal bikini mods and all the hot chick mods I used to use.
Looks significantly better on my PSVR2 over my Quest 3. Between the compression which Skyrim and Talos VR i seem to notice more and the new color palette looking more washed out than the PSVR2 OLED.
@@bigmakbm1 lucky you! I am happy that you are experiencing this in its full glory!
😍
Do the past saves (2.5) still load? Great work as usual
@@JhampaShaneman thanks ☺️ no, you need a new save file.
@@VRDaD a little sad about that but the game is so good
@@JhampaShaneman absolutely…I restarted so many times…every time it was worth it
Love your Skyrim stuff! Makes me look forward to the next time I try Skyrim. Last time was on PSVR, so no mods then.
Btw do you use additional mods with MGO? Perhaps a good idea for a video would be a presentation of other mods that work well in addition to the modlist?
Thanks for your comment :) I do use additional mods but not really important. I will make some videos exploring the mods that I believe being pretty awesome. I do have a couple already done about spells. Check them out!
Yeah, that's cool. I loved this mod list since the MO version, but now it's not working for AMD users. - the Moyse words :(
I'm not a huge AMD fan, but I don't really want or need to upgrade my current 7900xtx anytime soon. It's working great. But CS.... sometimes I just hate CS
Yeah…I just wish everyone could enjoy this…
Dude, this looks so much better than ENB can do in (mainly because the VR ENB is lacking some important features).
Meanwhile, Boris has posted a strange note on his ENB website explaining why Community Shaders is bad 🙄
Really? Instead of updating VR ENBs he does that? That is really strange…
@VRDaD yes 🤦🏻
@VRDaD on his website Enbdev (can't link directly, would be deleted by YT) he wrote a huge statement under headline "...you can read why ENBSeries is good and CS is bad."
I'm having a really annoying glitch. Whenever i'm in any menu, be it inventory or dialogue I can see what I can only describe as piece of broken glass that takes on the shape of things I can see on screen, sometimes its the joysticks other times its character models, the position changes based on where I move my head. As soon as I leave the menu its fine again. Also Mantella just comes up with an error whenever I try to talk to someone. Game looks fantastic though haha
Have you tried raising your issue in the discord? Maybe people there can help...
Great video as always man!
I have a question, do you know if these graphics and texture mods work with mods that lets you explore new places? like Bruma, Wyrmstooth, Beyond Reach and mods like that, thanks!
@@eliapavoni2275 they should…but I am not 100% sure. People on the discord may know better.
@@VRDaD Thanks!
woo! Looks like it is time to join Nexus Premium again and download 3.5.
@@donaldwang7538 have fun!
What is a good cpu to pair with the rtx 5090 to get the highest native resolution framerate without dlss?
@@joebro4411 probably the Amd 9800X3D…probably.
Always looks great but how's the mechanics and physics. I tried doing this before and it was kinda janky grabbing and swinging. If it had like blade and scorcery type stuff I would definitely do it.
@@gatgat00tweed78 no it’s not blade and sorcery. It’s a 15 years old game…so it can’t have all the stuff thr bode and sorcery has now.
@VRDaD ik that but ik there was a mod for better physics and grabbable items
@@gatgat00tweed78 plank+hggs+dismemberment mod its pretty damn fun
you can grab them and chop their arms legs etc cant stop playing actually because of that combo
its never gonna be like blade and sorcery physics but also blade and sorcery will never have a AAA open world and a AAA narative,blade and sorcery got the perfect physics but absolutely nothing else lol
@Cazanu417 yeah I downloaded the whole thing yesterday including the chat gpt thing
Damn, it comes with seasons too... I was just about to end tweaking FUS 😭
The curse of playing modded Skyrim 😂
Wish the 9070xt gets to run this nicely. My 6700xt can barely run it as of right now haha
@@elpato3190 I hope you will be able to enjoy it
Whenever I try to direct 3.5 Wabbajack installer on my 3.0 installation folders and check "overwrite files" In the end I get "Error, one or more files could not be downloaded". I have Nexus Premium, I tried it several times, but same result.
@@Szabby999 strange. I didn’t have that problem at all. It might be a nexus issue.
@@VRDaD I tried "verify files" and now I can open mod organiser., but at the top I see "1507 mods active". Is it right? As far as I remember at 3.0 there were about 1900 mods active at the start after clean install.
@ yes there was a reduction in active mods. Don’t worry about the exact number.
@@VRDaD Actually I also don't see weathers, CS and ENB settings or Reshade options... I guess it is not normal.
@@Szabby999 you shouldn't see anymore ENBs...now it's only CS
Very cool! I have a doubth. Is it using both, ENB and Community Shaders at the same time? Or you switch from one to the other depending on which effects you prefer? Because, to my knowledge, it was not possible to have them both working at the same time (though you can have them installed).
And other question... Do you have parallax on terrain? (all of it, not just roads). I have tried many ways (not with community shaders), but has been not possible.
@@kwlxxi4813 it’s one or the other. Yes there is terrain parallax and it’s awesome.
@@VRDaD Cool! Thanks for responding so quickly!
@@VRDaD Yes it is! I finally switched to to CS... I still miss some ENB features, but... the CS water and the parallax on terrain on VR, is hard to ignore...
Cheers for the video. Just been trying 3.5 tonight for the first time. With default settings it is way better than the best I could get with 3.0. Still have very flat trees in the distance which seem to look way worse than yours. Any idea what might cause that?
@@nzquads7831 flat trees? Can you send me a screenshot?
you topping that 24gb of vram with PBR?
im thinking getting the 5090 just for the 32gb but not sure
@@Cazanu417 no, but pretty close. In any case there is a solution for that anyway to reduce VRAM usage. I will make a tutorial on that.
When i search for MGO 3.5 on nexus i just find MGO 3.0. I am not shure how/from where to install it😢
@@ParaIelopiped from the MGO discord, in the announcements section. For the early access release it Otherwise wait for official release at the same link you went.
Oh i see. I'm not on discord, so will wait then. It will be my time for a fresh windows install😊 Everything allways works a bit smoother after reinstall. TBH, i'm affraid that something from earlyer Skyrim instalation can stay in the registry. Thanx for info😉
@ it shouldn’t matter if it was Skyrim vanilla. Nevertheless, remember to launch Skyrim vanilla at least once after a fresh install, otherwise wabbajack won’t find some necessary .ini files that it needs.
Hey VR Dad 😊 excited 2 try this new update. I love your content! Ive followed your guides to get MadGods overhaul and i love it. Its also my 1st time playing skyrim lol. How do i update to 3.5? Do i need to reinstall everything?
@@Flowlogic99 hey, thanks for sticking with me :) so to update, just download the new modlist. Then you launch wabbajack and you select it. Make sure you tick the box “overwrite installation “ before you press the play button. Unfortunately your previous save file is incompatible and you will have to start over again.
Ok good to know thank you! @VRDaD
@@Flowlogic99 you’re very welcome
How do I know which update I have? I downloaded it on January 14, 2025.
and hey, finally everything works. I had to restart it stupidly😂
In MO2 you should be able to see it. If you have the leonardo and faithful weather mods then you are on 3.5
@@VRDaD
No, unfortunately not. Can I do an update or do I have to delete the old one and download it again? And then I'll probably have to start a new game?
@@GelöschterGott you will definitely have to start a new game if you had a previous version. To update is very simple. Just download the new modlist and use wabbajack as before but be careful to check the box “overwrite installation”
@@VRDaD OK. is that the mod from January 12, 2025 with 1.8gb that I need? and I have mad god overhaul sfw and the other one is nsfw, would that work and is there a difference? sorry I hope I'm not annoying you too much, this is new territory for me
@ I think the safest bet is to download it from the link in the discord. When you join the MGO discord in the announcements section you will find what you need. Nsfw version is the one i recommend
damn I just installed 3.0.. now they come up with 3.5... at least make it so you can just update without have to lost the save game again
@@handihasan8823 I feel you…not my fault though 😂 I restarted the game countless times. This time is worth it even more.
how would this pack run on a 6900XT?
@@TravisG no idea unfortunately.
Dear VR Dad! Would you be so kind to help me? I tried to ask my question on every forum, but nobody cared. In short, I would like to use Reshade. I have fresh install of SkyrimVR and also of MGO 3.5. I install Reshade as administrator, I select skyrimvr.exe, instalation done. Now if I check glamour reshade in mod organizer the launch window pops up for a brief second, but then it stops and the game won't launch. If I uncheck glamour reshade the game launches, but no sign of ReShade running in the game window. Interestingly, if I try to install Reshade again on skyrimvr.exe, the installer lets me to do it (when Reshade is installed properly, it would not let me install again, only repair or remove, but not in this case). It seems as if Reshade can not be installed or used properly, however, when the skyrimvr launcher starts up from mod organizer for a brief second and rootbuilder activates I see the Reshade files are there in my skyrimvr.exe folder. I used Reshade (also glamour) with MGO 3.0 and I did not have any issues. Please tell me what I do wrong, I would so much like to make it work, I spent a whole day with this and still no result. Thanks in advance!
@@Szabby999 are you using CS? Because if you use CS then Reshade will not work! It works only with ENB
@@VRDaD Thanks for your response! Please help me to understand. Are you sure about this? Because in MGO 3.0 I was using Reshade and CS simultaneously with no problem at all. Did you maybe try: in Mod Organizer if you turn glamour reshade on, in this case does glamour reshade only work for you if you use ENB instead of CS? Just because like I said, if I turn on glamour, the game will not launch in 3.5 and I only tried default settings yet, which is CS.
@ my understanding is that reshade doesn’t work with CS. Please confirm in the discord. I am not an expert and I don’t use reshade
@@VRDaD Well, as soon as I get home I will try ENB if it works. with ReShade. Can I ask, in your opinion is the graphics quality significantly better with CS compared to ENB?
@@Szabby999 I like more CS tbh. There are too many good things compared to ENB. That's why you don't actually need Reshade. Just use CS with NAT3 or Azurite weather and it's incredibly good. I prefer NAT3 over Azurite, but it's a personal preference.
Is skyrim possible to sideload?? Nice vid 👍
@@herehere3139 I’m afraid not. This is PCVR only.
Any VR modlist recommendations for a 3070 ti? ;[
@@alexey9619 you can run this…but settings needs to be tweaked. Otherwise go for FUS.
Con una 4070 (non "ti", da 12gb di vram), un ryzen 7 5800x e 64 gb di ram, potrei reggere tranquillamente o no?
Tranquillamente è relativo..devi abbassare i settaggi ma può andare secondo me
My laptop is coming in about 3 days, but im not sure if an rtx 4080 with 32gb will suffice 🤔
@@alien1051 you should be fine
Will opencomposite work with cs?
@@TheVrDudeOfficial yes and it’s actually a must
You're using wireless virtual desktop, correct? How can you have the bitrate at 120? If I go above 47 (auto bitrate) the game stutters and crashes almost right away. Thanks again buddy! (Edit: I use a 5Ghz starlink router, just ordered the 6Ghz so that'll prob help a lot)
@@MrColonelJag my bitrate is at 200Mbps. I disabled automatic bitrate. My router is connected to my pc via Ethernet cable and is dedicated to VR only. If you got a Wi-Fi 6 or 6E router you should be fine, as long as you connect it to the pc via Ethernet cable.
@@VRDaD Ok cool I will await the 6Ghz router arrival. Thanks again! :)
Beyond the router it's not gonna look great without a beefy pc. Get a 200 dollar router if u want but if ur rocking a toaster use FUS instead
One 5090 won't be enough...😅
@@primalflowdao yeah maybe you’re right 😅
i get some weird rendering issues in the right eye only with community shaders, anyone no a fix
No idea…sorry about that. Join the MGO discord and maybe there is somebody that can help perhaps?
Sad I'm a poor dad only capable of pulling in a used 4060😭
Is there an easy VR mod for Multiplayer/Co-op?
@@TheDeathsentence123 that my friend would be the holy grail of VR gaming. If someone makes that for Skyrim VR it would be insane.
Its great but when the suns not out it looks super washed out with no shadows
Does 3.5 have the dismemberment mod included?
@@davescobedo I think so…cannot remember from the top of my head.
He's using a 4090, get a real PCVR headset like Pimax or PSVR2 and push the sampling up!
Are you getting a 5090?
@@joejo4549 I am undecided to be honest. I need to wait for the benchmarks. I won’t buy it at launch for sure. Nvdia is being a bit shady recently.
@VRDaD unless you're getting paid £100k a year it's probably better to wait 😉 it would be cool getting 120fps in the cyberpunk mod but not THAT cool
@@joejo4549 we will see.
But how play multiplayer with it?
@@rogueworm5810 you can’t. Simple. This is a single player game.
@ well I know there is the Skyrim together mod that you can use for it and you have to download a third party server hosting software I just wanted help figuring it out for the vr version
@ doesn’t work in VR, unfortunately.
@ well that’s saddening I wonder why that is, if it works for regular game it should work for the vr version it’s just a matter of coding it
@ I am not an experts but I agree with you. I would like to experience Skyrim in coop. Tht should be such a fun adventure.
I literally bought a quest 3 a few weeks ago after stumbling upon your video for the 3.0 release. I installed everything and got it up and running, but as soon as I left the cave, my performance took an insane hit.
I see people mentioning various tweeks and virtual desktop (maybe im stupid but i still dont know what this is - an ACTUAL virtual desktop or a program for vr?) and all this. I tried doing research for a few hours and became overwhelmed with all the information. Everybody seems to run fine on 4070ti's or 4070 supers, but unfortunately, i am running a base 4070. Are there any definitive guides per card, or is it just tweaking things until its playable?
Also, is more than one ssd required, or can you create the folder on the root drive outside the programs folder?
I'm on a 4070 as well and the performance was just too rough. I just about decided to dismiss Skyrim VR completely and then I decided to try the FUS wabbajack and having actual 90fps makes it so I am actually enjoying it. I'm finally getting the "WOW I'm in virtual Skyrim" that everyone describes.
@@CadilakCoupe virtual desktop is a software thr you install on the quest, to connect the headset to your pc (you need also a streamer app on your pc). People connect it through (normally) a wifi6 or 6E router which is dedicated to the headset. The space required is around 400GB…
@VRDaD This is the part that confuses me. Is Rift Link not sufficient as this was my original method of getting it to work. Used Rift Link, switched to desktop display, and launched via a Wabba shortcut I placed on my desktop.
@michaelb2305 Does FUS sacrifice the beauty for the performance? Does it have the AI component that allows communication with the NPC's, and would you recommend it?
@ I recommend FUS for a more vanilla experience. Is no way close graphically to MGO. I don’t think it has AI as well. But it is very stable, performs well on lower end systems and has all the QoL improvements that are needed for an excellent Skyrim VR experience.
What’s the file size of the mod?
@@jackfarris3670 you need 400GB on your SSD
So is there a direct link for this somwwhere?
@@skippychurch2965 yes…description?
@@VRDaD I found it on nexus. Excuse my ignorance. :)
sorry don´t have a RTX 5090 XD
@@rentaroanaka419 me neither 😅
Is there an easy way to upgrade MGO 3.0 to 3.5? Do I need to uninstall and reinstall from scratch?
If you download the new modlist file and direct wabbajack to your original 3.0 downloads folder when installing 3.5 it should grab what it needs from there and download everything else it needs to install the new modpack.
Will it then work with an existing 3.0 savefile?
Thanks!
No! You need a new save file unfortunately.
@@VRDaD- thanks for the confirmation.
It’s not worth starting over again for the weather, 3.0 looks good & plays well.
@@RolandDobbins yes. 3.0 is excellent
vram at least 12 required
the more the better...
Is this on wabbajack?
@@Sieg2k6 it’s on nexus. See link on description
I don't like seasons I will stay at 3 0 0
@@Blightmydudes ok 👍🏻 3.0 is fantastic as well!!!
There is one HUGE problem with these mind-blowing mods: They are made for the absolute enthusiast who doesn't settle for less than the absolute best. But here lies the problem. Being this type of enthusiast doesn't allow for enjoying something (no matter how good it is) knowing there is something better out there. Looking at the maddening frequency with which this god-tier mod here gets updated, I simply don't dare to start a run since I know the mod will be updated within a few weeks which means I will no longer be able to enjoy my walkthrough (knowing I am no longer playing the best version). If it's possible to always just update from your version to the newest one that's fine but that's not always the case.
@@lohan0903 I feel you. Restarting once again was a pain for me too 😂 BUT was totally worth it. I think we are reaching a point where save files that break is finishing and updating will be easier….or at least I hope so😅 alternatively, just do a play through and ignore future updates.
@@VRDaD "alternatively, just do a play through and ignore future updates." If only it were that simple. 😂
The colors look so bad.. I don’t get why people want their skyrim to look like willy wonka’s chocolate factory.. all the colors are so heavily saturated.. not for me, sorry.
@@freekjansen8451 personal preference I guess? There are other mod lists that give you a more vanilla experience if you like that. I would recommend FUS in that case.
That was exactly what i thought. Those blurry shiny colours is not Skyrim anymore.
I agree with you. The MGO is amazing but we want more realistic colors, not the vanilla.
Heavy saturation seem to be addicting to some (my guess). Look at all the kids-songs with 100M views on YT.
@@SlyHaku the thing is it depends on weather! Sometimes there are scenes that are completely natural looking and sometimes those a bit more colorful . I like colorful more because I live in the grey UK...
Your title is everything wrong with VR.
I don't think I understand...my title? or my video's title? also...what's wrong with VR?