At the moment I'm using a regular DMX 192 Controller because my laptop is broken and I can't move my desktop computer next to the fountains, I should have my laptop ready in a few weeks with some proper software installed.
Hi . Do you remember me ? How are you ? I bought one of those small yellow pumps on Amazon and i Made a custom nozzle for it. Its amazing and so powerful. In this Days i Will make a video of it working. I Will buy soon a dmx switcher to use my pumps with dmx !!
Hey! make sure to use an appropriate DMX Decoder according to the specs on the top of the pump AND VERY POWERFUL FLYBACK DIODES!! or else you might burn the decoder. Other than that you should be good, the pump does last only 20 days running at full power with no stops when it starts failing you need to replace the carbon brushes, but if you have it not even at half power like I do then you should be good!
Hello, what do you really mean by DIY? I made this fountain without any specific special fountain equipment, it was all things I adapted, like pumps used to drain boats for example.
@@marcorromix The pump used costs about 100€ and it is a Sterwins 1000w 18000l/h it has an assynchronous motor which allows it to work with Inductive Dimmers (also DMX Dimmers) but make sure if you use a dimmer for it to have 10A (for inductive loads) or more and make sure the max power output is way higher than the pump's required power. Though this is not efficient.. It's costy to run, I recommend that if you have the money you should buy a pump from Oase, as they are way more energy efficient. About the nozzle it costed me around 20€ when i bought it, its a G4 and made of stainless steel, if you use this pump you will need something like it because it "straightens" out the water, I found this nozzle that is quite similiar on ali express you can keep looking for other ones just keep in mind the size you want and that they must have a little red piece (flow straightener) m.pt.aliexpress.com/item/1005003003873923.html?spm=a2g0n.productlist.0.0.50d8nTovnTovS4&browser_id=489c679c35c54b96a13d39a5529a549a&aff_trace_key=ec05b3a3b0ce494a9967194876d5e02d-1640392565819-02339-UneMJZVf&aff_platform=msite&m_page_id=17f048f19e719032cd512264c8a420b974bfe2899f&gclid=
@@LidicoFountains thank you, now i only have to research if it does not surpass my budget. i do know how to make straighteners for nozzles, but i will have to try on larger scale
Dear The Nozzel do you use , to you now the hole size (mm) ?and the Thread 3/4? Because i am looking for a littel smaler one , me Pump ist a 8000 Liter or a 10.000 Liter . Maybe you can recommand me a nozzel ? Tranks a lot for your help
I'm not sure what to recommend you because some nozzles like the 3/4 threaded ones you we're talking about create really thin jets, I think your best option is to buy a garden hose adapter and use it as a nozzle but you might need to make your own flow straightener (which I don't really understand how to)
@@createwas.nik.niklas2188 I can't find the nozzle i'm using at the moment but I can confirm that it is very large (the middle jet I assume we're talking about)
@@createwas.nik.niklas2188 The nozzles I used in this video are just regular garden hose connectors, I currently use ones that are 1 cm thick instead of these thinner ones
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
This is amazing! You got a real talent, never give up!
Thanks so much!
This is incredible! Hope to see more! 👍
You are getting there, looking forward to the "How DMX works" video.
Thanks, I can't wait to see this with some other pumps and extra LED Lights in the big pool.
You Getting There With DMX.
Nice program for a Dmx program
Beautiful!
Thanks!
I found you
Thats dope mate
Which program did u use for dmx
At the moment I'm using a regular DMX 192 Controller because my laptop is broken and I can't move my desktop computer next to the fountains, I should have my laptop ready in a few weeks with some proper software installed.
cool
woah O_O
Hi . Do you remember me ? How are you ? I bought one of those small yellow pumps on Amazon and i Made a custom nozzle for it. Its amazing and so powerful. In this Days i Will make a video of it working. I Will buy soon a dmx switcher to use my pumps with dmx !!
Hey! make sure to use an appropriate DMX Decoder according to the specs on the top of the pump AND VERY POWERFUL FLYBACK DIODES!! or else you might burn the decoder. Other than that you should be good, the pump does last only 20 days running at full power with no stops when it starts failing you need to replace the carbon brushes, but if you have it not even at half power like I do then you should be good!
@@LidicoFountains for the pump I have also had to buy a huge power supply to make it work, because it's 5.4 ampere and it's a lot!!
@@djedo7875 Trust me I know that! I plan on buying way more of them and power supply is already a headache
If i buy a dmx switcher Will i burn the pumps?
@@djedo7875 Not sure, But I use dmx decoders and they work for the yellow pumps...
👍👍👍👍👍керемет
Hello. My name is Rodion.I am your follower from Russia. I am interested in fountains. Can you do the DIY video version of this fountain? Thanks!
Hello, what do you really mean by DIY? I made this fountain without any specific special fountain equipment, it was all things I adapted, like pumps used to drain boats for example.
what is the nozzle of the tall jet and wich pump did you use? because i am trying to make a temporal founain with just one jet
I'll tell you what I used later I need to check if I'm not confused with another pump I have
@@LidicoFountains ok thanks
@@marcorromix The pump used costs about 100€ and it is a Sterwins 1000w 18000l/h it has an assynchronous motor which allows it to work with Inductive Dimmers (also DMX Dimmers) but make sure if you use a dimmer for it to have 10A (for inductive loads) or more and make sure the max power output is way higher than the pump's required power. Though this is not efficient.. It's costy to run, I recommend that if you have the money you should buy a pump from Oase, as they are way more energy efficient.
About the nozzle it costed me around 20€ when i bought it, its a G4 and made of stainless steel, if you use this pump you will need something like it because it "straightens" out the water, I found this nozzle that is quite similiar on ali express you can keep looking for other ones just keep in mind the size you want and that they must have a little red piece (flow straightener) m.pt.aliexpress.com/item/1005003003873923.html?spm=a2g0n.productlist.0.0.50d8nTovnTovS4&browser_id=489c679c35c54b96a13d39a5529a549a&aff_trace_key=ec05b3a3b0ce494a9967194876d5e02d-1640392565819-02339-UneMJZVf&aff_platform=msite&m_page_id=17f048f19e719032cd512264c8a420b974bfe2899f&gclid=
@@LidicoFountains thank you, now i only have to research if it does not surpass my budget. i do know how to make straighteners for nozzles, but i will have to try on larger scale
@@marcorromix you can always make a mini laminar nozzle which is pretty much what that nozzle does.
Dear
The Nozzel do you use , to you now the hole size (mm) ?and the Thread 3/4?
Because i am looking for a littel smaler one , me Pump ist a 8000 Liter or a 10.000 Liter .
Maybe you can recommand me a nozzel ? Tranks a lot for your help
I'm not sure what to recommend you because some nozzles like the 3/4 threaded ones you we're talking about create really thin jets, I think your best option is to buy a garden hose adapter and use it as a nozzle but you might need to make your own flow straightener (which I don't really understand how to)
Dear
What Nozzel do you usw G4 i can Not found ?
Do you have a. Lieber Link for me where i can buy it?
Thanks a lot for your reply
@@createwas.nik.niklas2188 I can't find the nozzle i'm using at the moment but I can confirm that it is very large (the middle jet I assume we're talking about)
Dear
No i mean the outside three Nozzel do you have.
Not the big one in the Middel.
Sorry for my english i use a Google Translationen.
Thanks a lot
@@createwas.nik.niklas2188 The nozzles I used in this video are just regular garden hose connectors, I currently use ones that are 1 cm thick instead of these thinner ones
Fountains make me wet, Literally.
I know
@@LidicoFountains am i funny yet