How to Program Remote Control duplicator programming copy clone gate 433mhz Garage door remote key
HTML-код
- Опубликовано: 14 окт 2024
- Today's video mainly introduces the usage of Rodot copy/clone remote control.
Rodot clone remote control can copy rolling codes and some special codes.
U.S. site : www.amazon.com...
German site : www.amazon.de/...
If you want to copy the remote control, you must first make the clone remote control in an uncoded state（clear code）
Specific clearing operations:
Long press the A button and B button of the Rodot remote control. When the indicator light flashes, keep the A button unreleased and press the B button 3 times .
It is worth noting that you must wait for the indicator light to flash slightly before pressing the B button, otherwise it may cause the code clearing failure！
Status after clearing the code: long press any button, the indicator light flashes and then goes out！
Specific copy programming operation：
Prepare your original remote control and the RODOT remote control that has been cleared.
For example, if you want to copy the A button function code of the original remote control to the A button of the RODOT remote control, so that the RODOT also has the function of the original remote control A button, you can Do this:
1、Long press the A button of the RODOT remote control, the indicator light flashes and then goes out. At this time, the A button is in a state of waiting to receive the code value.
2、Long press the A button of the original remote control, the original remote control sends a code.
3、While pressing and holding, keep the two remote controls as close as possible.
4、Wait until the indicator light of the RODOT remote control becomes steady on, which means the copy is successful！
If you have any questions or needs, please comment below the video or contact the email daisy@rodotdiy.com
Thank you for watching！
hi can you help me please ? i just buy this decoder and i wanna know if i can copy a garage remote using the RX480E chip ??
Thank you for your question
Let us know the shortcomings of our video
Next, solve your problem
You mentioned three things in your question
You magically connected the three together
Let us understand each one one by one
You will know the answer
First, the decoder
The decoder is used to interpret the code value of the remote control, that is, it receives the RF signal and then displays the result to you through the LCD screen. In addition, it can also power some of our unique modules, such as: receiving module WL102, transmitting module WL101, receiving module with decoding: RX480E
Second, RX480E
This module can receive RF signals and then output the corresponding level signal through the pin, allowing you to directly DIY the RF signal, such as the remote control of the garage door
Third, the garage door remote control
This is a source that transmits RF signals, and it itself carries fixed data information
How do the three connect?
RX480E can receive and output the signal information of the garage door remote control through the level change of the pin
The decoder can directly display the signal information of the garage door remote control
The decoder can power the RX480E and has an LED light for demonstration
Finally
Let's take a look at your question
What you want is to copy
Then we know from the above
These three things do not have the function of copying
So you only need to buy a copy remote control to copy the garage door remote control
You can also check whether the copied information is consistent through the decoder
In short, I hope to answer your questions
If you still have questions, I can answer them further
I brought five different clone remotes from Temu - all from different manufacturers for £1 each. They were all able to clone using this video so there must be a common manufacturing process in each factory. So now I have 5 spare remote controllers and only paid £5 in total. These all have a good range and will open my gates at 50 meters distance
It's really useful! I just need to know how to copy the remote
Reset and copy looks successful and it works fine for the very first time when I first press the button, but then it "forgets" the code and never works again unless I repeat the whole procedure. Any idea?
the garage likely uses a rolling code, so the code changes every time the receiver gets it
Ciao, Bellissimo video dove spiega a dovere il funzionamento. Vorrei chiedervi gentilmente dove posso acquistare quel lettore copiatore di frequenza, potrebbe indicarmi il sito da dove poterlo acquistare? Grazie!
Ciao amici, potete acquistare a questo link
www.amazon.it/dp/B09GF789Q8
Can
It program the renault card key
Oh my god!
Your idea is very dangerous!
This is not feasible, because Renault and other big manufacturers must have multiple encryptions.
We are targeting some simple and commonly used remote controls!
The main purpose is to make your life more convenient.
How much
The copy remote flashes after pressing a & b together but it doesn't learn the code. The light turns on solid but no code is retained.
Hi, where can i buy it in the philippines
I have the ABCD one, I have cleared the old memory, done step 1 to clone, but the instructions say to press and hold button A on both the old and new fobs till the led flasshes 3 x, and stays on constant on the new fob, but it only flashes, the LED doesn't come on constant.
Did you ever get this to work? I have abcd one and it doesn’t flash
@@moniqueferguson7759 Hi, nope, I ordered 3 of them, couldn't get any of them to copy. Waste of money and time.
Buongiorno, grazie per avermi risposto, ma non alludevo al telecomando, questi telecomandi si trovano ovunque. Mi riferivo al frequenzimetro che voi usate per leggere la frequenza di lavoro del telecomando, quello mi interessa sapere dove acquistare uno UGUALE a quello che si vede nel video. Grazie!
Ok, scusa, ho frainteso quello che volevi dire.
Di seguito è riportato il link corretto
www.aliexpress.com/item/1005003323009870.html
ciao giuseppe
I did exactly what was in this video and it did not work. I gave it some thought and took both remotes (original and clone) away from the gate and out og range. I then did the cloning process. When I went back to the gate Button A opened the gate but would not close it. Button B closed the gate. When I tried to reopen the gate again, neither button worked. I even went as far as to set the code again, leave the original key out of range and then went back to the gate with the clone and it worked the same way. Button A opened, button B closed it, then neither worked.
I bought my remote from these people. I emailed the address in the description above and I got no response. I also left a message on the Amazon page and got no response. These people have no customer service and right now I am not even interested in them or their remotes. I will be returning these items and I will be giving them a bad review.
not useable in the united states.
This is a matching product, and it will not be unusable due to different regions. Your console may not be 433mHz🥲
china faac