How to use: Blue light remote control Duplicator
HTML-код
- Опубликовано: 9 окт 2016
- Blue Light Remote Control Duplicator From:
goo.gl/kJkQRU
Link from DE: www.amazon.de/dp/B09GF789Q8
how to use：
Step 1 - delete the existing code of our remote duplicator
1) Press and Hold “A” and “B” buttons together - Led will flash 3 times
Keep holding “A” button and release “B” button
2) Keep holding “A” button and push “B” button 3 times, Led will start flashing Non-stop
(Please note: during the deletion procedure, make sure to keep the “A” button pressed the whole time)
Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted!
Step 2 - clone your original remote
1) Put both remotes into “back to back” position. Make sure they have direct contact.
Or the two remote controls should be placed as closely as possible (put the two remote controls on the desktop side by side with zero distance)
2) Press and hold one button on your original remote and one button on your clone remote.
Keep holding until LED will make 2 blinks （Note: LED 2 blinks not to release button）
Then 3 blinks then into steady and you have successfully cloned. ( other buttons follow the same above operation)
If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.
For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code. 
Наука
Thank you! Spent 20 mins trying to do it via their instructions. Came here, saw your video, did it first go after that. Nice one.
Thank you for sharing, I didn't catch the erasing procedure before. Now my clones are well working.
Thank you
Dony work
Excellent. Thanks a lot Bro. Paired successfully..
Thank you, very helpfull your video is excelent
Brilliant video, worked first time with your help. TY
I have already a A and B in my remote how can I now add a C and D without erasing A or B function?
Very helpfull! Thanks!
Finally a video that showed me how to do it. Thank you very much.
Ha funcionado. Muchas gracias.
Hi, information to set the black one? it's important, thanks
Does red light and blue light indicator differs ?
many thanks.... i search longtime for code my new remote...your video it s perfect...
Thank you! Follow qiachip facebook if you want more information, thanks!
Thank you this helped me as well. The website wrote wrong instructions and i wasnt able to program. But after watching this vola....
Merci beaucoup 😊
433Mhz or 433Mhz and 315Mhz pairing?
hi,my remote is 315mhz and i buy a new remote 433mhz..The copying is succeed but when to use to my car alarm its nothing happen so my question is..can it work to copy from 315mhz to 433mhz? or it must in the same frequency? PLss help
Excelent thank you!!
THX!!!
What's the difference between the blue light and red light
THANK YOU VERY MUCH EXELENT VIDEO IT HELPED ME TO DO IT SUCCESSFULL .
Is the black one with red buttons available? Pls reply with a link if available. Does the aliexpress store also sell 12v 2 channel relay module?
Hello, do you insist on using the black remote? I'm wondering if the brown one www.aliexpress.com/store/product/433Mhz-Wireless-RF-Switch-DC12V-Relay-Receiver-Module-and-433-92-Mhz-Remote-Controls-For-DC/2138259_32849723010.html?spm=2114.12010615.8148356.23.3cbd440ac56WwL is alright? If you insist on using the black one, we can give you the black module. Just note it to us during your purchase.
Ottimo video 👍
I can not get the lights to stay off
same
Thanks
perfect helped me ...
Wow this sure help.
Perfeck Thank you 👌
did exact same blue blink mean copied but doesn't worked tried on to many car now way junk
היי איך אני יכול לדעת איזה סוגי שלטים השלט הזה יכול לשכפל יש לו תדר מסוים?? ואיך אני יודע מה התדר שלי?? תודה על העזרה
Can I use this to copy garage opener remote, car key FOB remotes?
Hi, this remote cannot copy FOB remotes.
My remote isnt flashing when clicking the two buttons
I have the same issue - any solution ?
Change the battery
???????????my remote does not work following this procedure
my remote successfully duplicate. but cant open the gate. is it because different volt of the duplicating remote?
I have the same problem. Did you figure it out?
Same problem here, successfully copied but the 2 gates/doors don't open
Remot yang kotak ada antena nya ada huruf abzat a b c d itu apa remot lampu strobo bang
Does India support remote
I purchase a set that look like this on amazon but they don't work any ideas how to make it work????
Hello, when you copy the remote control, please try to keep the remote control as close as possible. Press the AB buttons together until the indicator light flashes, then copy with the remote control as close as possible
Hi, I follow the erasing procedure as on the video but after pressing three times on the A button the other buttons still show a light after pressing them. Can anyone help?
You might have mistakenly restored the erased code, try and erase the code again. Be careful not to press the c & d button at the same time, it restores the code.
@@qiachip Thanks for your reply, I will try as soon as I can and will let you know whether it worked or not.
Thank you for Türkiye
numan temiz thank you for your support man!
Can these copy other people's key fobs
Where do you get these
Hello, you can purchase them from www.aliexpress.com/item/433-92-Mhz-Duplicator-Copy-CAME-remote-control-TOP-432EV-TOP-432NA-TOP432NA-With-Battery-For/32687574582.html
I lost my remote any one help me
Reprogram gate remote controls
i made one duplicate cloning remot... can i make it clean and make another?
Yes, depending one which type of remote you have I can guide you through it. Just post a link of the remote you purchased from down below.
uae.souq.com/ae-en/came-top432ev-top434ev-garage-door-gate-remote-control-replacement-duplicator-11237792/i/
Hi, that's isn't one of our store. So, we are not sure if there remote control are the same. You can purchase here www.aliexpress.com/item/433-92-Mhz-Duplicator-Copy-CAME-remote-control-TOP-432EV-TOP-432NA-TOP432NA-With-Battery-For/32687574582.html Under the description on the page, there is a detailed guide about how to clone and clean the remote control.
Süper
numan temiz thanks!
my new remote dont flash when he need learnd
Hi, may i have the URL/ Web Link you purchase your remote control from?
Is this a remote clone 433MHz?
Yes
Mercci for you
I'm not sure what you mean, can you say that again?
How far distance can it be
I am happy to answer your question.
Here I need to explain a basic doubt to you.
The distance of remote control is related to two factors.
That is, the transmitting remote control and the receiving controller.
If both are good, the distance is very far. If one is poor, the distance will be affected.
Therefore, I can't answer your question accurately because I don't know how your receiving controller is.
I can only provide our data for your reference.
If you use our receiving controller, it can reach 100 meters in an open space;
in a general office environment, it is also about 50 meters.
I hope to solve your problem and look forward to follow-up feedback.
Good news!Amazon’s new products are on sale for a limited time,
Discount Details:
20% off on $0 +
30% off on $69+
Coupon: RODOT2021
Valid until Feb 31th, 2021
Available for RODOT site-wide items.
www.amazon.com/RODOT-Wireless.../dp/B08VDCP1JY
To give the product as a gift, please email daisy@rodotdiy.com
Did the procedure some 37 times (!). But what happens is that the new remote takes over the code (so it works), but the original one looses it code. Don't know how to solve this.
Wow, why did your original remote control fail?
Please tell me what the failure phenomenon is?
If you are using our copy remote control, then our remote control will not interfere with the original remote control!
There are two basic points to understand when choosing a copy remote control
1. Is it the same frequency? Our frequency is 433MHz
2. Is it a coding format that can be copied? We are compatible with most of them, but some rolling codes need to be customized
Looking forward to your reply and hope to help you
@@qiachip Yes, both original remotes don't work anymore.
I purchased 2 of your remotes previously (call them A and B), those are programmed with the original remotes.
then, I purchased an extra remote (call it C)
Tried to program remote C with remote A and with remote B. What happens is over and over again, is the following 2 situations:
- After resetting the new remote, when trying to program, the new remote gives 3 light flasehes (2 times), and it its not programmed.
or
- After resetting the new remote, when trying to program, the new remote gives many very quick flashes, resulting in that it is programmed. But the remote A (or B) as source, looses it's functionality.
My original remotes (delivered with the door opener) are indeed 433 MHz.
Coding format can be copied
I am totally puzzled
Ok
Não funciona. Joguei dinheiro fora
Thank you so much
I like you fuckin Chinese lol just kidding
But the battery 12v 23A is a little bit bigger inside remote.
Any link to correct size?
שכפול שלט
Very helpfull! Thanks!
Cruzeiro o maior de Minas.