Yeah, you saw that too? I'm currently putting bags on my F350, one big thing the instructions say is to make sure the bags are aligned vertically, and the distance between the brackets is the same on both sides, otherwise there's a good chance you'll be damaging the bags. Guess I'm off to look for another video.
@@sophry7556 Yep. I did install those bags on my truck, have about a 100k miles on them now, they're holding up fine....as long as you do the install right, unlike the experts in the video LOL.
Are the fasteners hardened? I couldn't tell from the video. Some kits have soft junk fasteners. Also, are there torque specs included? I have plenty of impacts, none will insure the fasteners are tightened correctly.
Customer service is iffy. Be sure to have an order # if you call with any questions about stuff you've purchased. If you cant prove you're a customer, then dont bother calling.
Read the instructions this is correct. I questioned it also as the bag is not straight up/down. Take away the lift kit spacers and it’s still correct. Would have nice to know he torqued everything to specification.
Hammer and screwdriver to remove OE bump stop frame clips? 🤦🏼♂️ and parts installed incorrectly... I just did installed these on my 17 F250 glad I followed air lifts instructions and not this video tutorial
How lifted was the truck that you needed spacers, I just ordered this system for my 22 250 and I have ready lift 2.5 lift kit so 1” taller blocks in rear.
Yes you can put this kit on a 6" lift. Here is the spacer kit you would need - www.stage3motorsports.com//52150-2004-2014-F150-F250-Air-Lift-Load-N-Lock-Air-Spring-Spacers-6inch.html
who is your engineer?? because you need to fire him/her. air bag not straight up and down. mean you can sheer the lower bolts. they are in plastic. 2nd why install it to the cast iron? is there not a top hat you could make a new piece to replace it and your done.
Question: Any idea what spacers would be needed for a 2020 F350 Tremor? The manufacture website says it will not fit Tremor, but I am assuming that is without the spacers.
Guess what! You can now tighten that bolt down!
Really nice that the upper bag brackets were installed BACKWARDS and are binding the bags.....The bags were very badly out of alignment!!!
Yeah, you saw that too? I'm currently putting bags on my F350, one big thing the instructions say is to make sure the bags are aligned vertically, and the distance between the brackets is the same on both sides, otherwise there's a good chance you'll be damaging the bags. Guess I'm off to look for another video.
@@Czech6ix I thought something looked funny there..
@@sophry7556 Yep. I did install those bags on my truck, have about a 100k miles on them now, they're holding up fine....as long as you do the install right, unlike the experts in the video LOL.
@@Czech6ix I appreciate the heads up.. i just bought a set myself. Should come in saturday!Saturday!! Woohoo!
Are the fasteners hardened? I couldn't tell from the video. Some kits have soft junk fasteners. Also, are there torque specs included? I have plenty of impacts, none will insure the fasteners are tightened correctly.
Customer service is iffy. Be sure to have an order # if you call with any questions about stuff you've purchased. If you cant prove you're a customer, then dont bother calling.
What kind of spacer would I need for a 2021 f250 4” bds
Hello, I have a 2019 F250 with 3.5inch readylift, will this kit work without any issues with this lift? and are the lifted pucks included?
Without that lift kit the last bolt to tighten is near if not impossible to get ta wrench on now..
Read the instructions this is correct
Do you have Air Spring that can accommodate 10,000 lbs?
Is there a video on RUclips of someone doing this correctly?
wow what a dick head
@@robertbudach3304 maybe, but dude did it wrong...for real.
If this video doesn't help you get'r done, you probably ought not be wrenching on your truck. Or anything.
@@andrewalexander5049 that's racist.
Read the instructions this is correct. I questioned it also as the bag is not straight up/down. Take away the lift kit spacers and it’s still correct. Would have nice to know he torqued everything to specification.
I think I saw somewhere else in one of your pics that the truck was lifted 4.5 inches. You only used 2 spacers under the airbag for a 4.5-inch lift?
Frank Aldaco yes because a 4.5” lift is in the front, the rear only gets lifted 1” over stock... a 6” front lift is only a 3-4” rear...
I need this for my 2003 f350 is there a kit ?
Will this help to soften ride when not hauling?
not at all dont run them when its empty
music loud and sucks.
really ruined an otherwise good tutorial for me, agreed
turn the music down so people can hear the video
Does this require longer shock absorbers?
Why don’t they just install most of these parts before shipping
Hammer and screwdriver to remove OE bump stop frame clips? 🤦🏼♂️ and parts installed incorrectly... I just did installed these on my 17 F250 glad I followed air lifts instructions and not this video tutorial
I put ones but don't know what tha psi
How many spacers would be required on a 19 F250 with 8 inch BDS lift?
I would think enough to accommodate 8 inches lol
How lifted was the truck that you needed spacers, I just ordered this system for my 22 250 and I have ready lift 2.5 lift kit so 1” taller blocks in rear.
Have you installed them? And did it ended up higher than the front?
What is the price parts and labor price
I got the 3.5” pro comp leveling kit. Says in the video of truck is lifted I need additional spacers?
Bags are all caddywhompass
will this work on a 6" lift?
Yes you can put this kit on a 6" lift. Here is the spacer kit you would need - www.stage3motorsports.com//52150-2004-2014-F150-F250-Air-Lift-Load-N-Lock-Air-Spring-Spacers-6inch.html
On 5000 pound how many psi do i put on the air bags
The paperwork says 5 psi min and 100 psi max
who is your engineer?? because you need to fire him/her. air bag not straight up and down. mean you can sheer the lower bolts. they are in plastic. 2nd why install it to the cast iron? is there not a top hat you could make a new piece to replace it and your done.
Great job guys
Question: Any idea what spacers would be needed for a 2020 F350 Tremor? The manufacture website says it will not fit Tremor, but I am assuming that is without the spacers.
Hi Brandon, give our team a call 623-434-5277 or send us an email sales@stage3motorsports.com for more!
lower mount looks cheesy
kubota3010 Agreed.
Do not like the video because every time I asked her by airbags on the dash if he's pulling this video up
looks but im afraid id fuk it up somehow
Como puedo comprar el kid
En la pagina web de esta compania o tambien en Amazon. Primero busque acual kit es para su camioneta
Could you use this kit if you lower the rear end?
No because lowering a truck is fucking gay.
TheSoloAsylum your comment made me laugh for about 30 minutes. Thank you 😂👌🏻
Damn that music is the worst and u can’t hear the guy for it burn that music
cringe worthy video after seeing the upper bracket is installed backwards, and over 300k people have watched this.
Can you turn the stupid music up; i can still hear you talk slightly.
Hi I'm working on a 1999 ford f250 4x4 I'm trying to install that kit what the precio for the kit ?