I have removed,rebuilt motors, or repaired them in cars ,and trucks,every since I graduated auto. tec. school in 1959,I have never worked on a VW motor,tanks for showing this video,I now feel comfortable enough to overhaul one or a dozen,at 78 you have enlightened me.
I love that instead of just doing it yourself you had Brian do it. It's nice to be able to teach what you know, not so you don't have to but so that others can learn and do it for themselves. Promotes growth for both parties
As somebody who would like to own a Beetle at least once in his lifetime, this video was fascinating. I love watching you work on Bugs as I *always* learn something new about them.
I like the fact the thermostat and flaps were left on, so many people throw that stuff out! The vacuum advance was a nice sight as most want to drop in a 009. I've had good luck with T-3 lower cooling tin when a J-tin with good holes wasn't available. The extra big catch-all on the floor is a nice feature. Not everyone does, but when re-using pistons and cylinders I like to hand lap the cylinders into the heads.On the thick wall cylinders I like to use the ball hone to give the rings another set and I permatex the cylinder bases onto a cleaned block surface
Your workshop is a godsend, you can take your time and miss nothing. No rushing because of freezing fingers and crappy weather. Brian is lucky to have you as a frend :-).
I have watched many of your videos,from your snowblower repair,gen repair, ohh hell I have watched a ton of them and they are super great, your trouble shooting techniques are damn close to what I would do. I picked up a tip in one of your other videos and again I watched it being used here and that is using the rag around the bail and pulling downward, I have scratched up many a nicely painted valve cover using a screwdriver . I like your can do attitude and especially your willingness to show others how it's done. Tell Brian that a few years ago I tried to drive my 68 VW year round but one month into a Montana winter, I felt like I was driving inside a snow globe. and me being 62 and haveing crap joints I headed south Best of luck to you, from New Mexico
It's nice to see a younger generation work on these wonderful VW's....I often anticipate your next move or the tool your looking for or going to get.....Retired Mech........John.
I can't get ENOUGH of your videos!! By far the best Dub channel. Not to mention your patience lol, always in a good mood. Glad I stumbled across your channel. Be blessed!!
A couple of vw engines I built, I installed adjustable/expandable push rod tubes, after market of course, if one leaks just expand it out and tighten it up.
Mustie, love your vids! Only thing for me that would make them better is to go into a bit more detail about the what, why, and how of what you're doing/using. I'm a newbie to engine repair, so any additional info would be much appreciated!
When I was stationed in Germany many years ago, we used to rebuilt VW engines then race them out behind the motor pool. Brings back memories. THX for the videos.
The cylinder heads shown in the beginning of the video are 40 HP. 1200 CC heads and you probably noticed that later. I was surprised to see that the cylinder/head joint had broken seal, that wasn't that common on the single port motors, but fairly common on the dual ports. It's nice to see you're using the air doors and thermostat, the engines wear out much quicker when they're left out. You also lose 6-8 Hp. when they're not there.
why not drive it year around? I know rust might become an issue but in the fall and spring, you can oil coat it. I would like to build one up for my daughters first car and it would be driven year around, and im in Iowa so it does snow here.
Mustice I am sure you know this so don't take offense. Volkswagen recommends putting in new exhaust valves do to cyrsitalizaisn from heat over years of use and 100 of 10000 of Rpm's. Also if you do your own heads and ever have an issue with valve guides they can be almost impossible to remove with a shouldered punch but you can tap them with a fine thread 3/8 TAP AND INSTALL A BOLT. AT THIS POINT SET ON A 4X4 BOARD HEAT THE HEAD AND PUT A PUNCH INSIDE THE GUIDE AND DRIVE AGAINST THE BOLT. WORKS FANTASTIC TO REMOVE GUIDE. I WORKER FOR YEARS IN A AUTOMOTIVE MACHINE SHOP AND USED THIS WITH A GREAT DEAL OF SUCESS. REALLY ENJOY YOUR VIDEOS!!!!!
How do you check the top surface of that one jug with blow-by? I thought maybe you would have pulled that jug off and lapped the top face of it to check it was completely flat before assembling it with the replacement head.
hey Mustie do you ever check the top surface of the jugs on a flat plate that area that had the blow by can be cleared up with a sheet of emmery on a sheet of tempered glass , all so keep a spare jug to lap the head mating surface too with a little blueing and valve grinding compound, always good for a few more lp's of compression
Another great video luv the quickly rebuild I'm new to the vw world as I just put my first vw together (70 convertible) I learn so much from what you know and how you share it all with us always looking forward to what's next ...thank you!!!
As much as I enjoy all the other shenanigans and escapades, watching Mustie working on anything VW are, by far, my favourites. This one was ...interesting.
Reminds me of when I took my '74 1200 Beetle engine apart to replace the conrods! (The little ends were shot) I remember using a copper coin (2 pence in the UK) to clean the piston crown! Also, no new pushrod tubes, just a good clean and a gentle stretch before installing.
805ROADKING hey Mr roadking what are you doing wondering around youtube, you are supposed to be working on the water cooled Briggs lol, I am one of you're subscriber's btw
That shows how tough those little Volkswagen air cooled motors are. Most water cooled engines would have serious running issues with problems like that one had, but the VW just keeps on going. Going slowly, but going...
Actually that's a good trick for getting traction on snowy roads. Fill up the bed with snow, it will put weight over the drive wheels, and when it warms up enough that you don't need it...it goes away, all by itself!
I think it would be fun to have one of these engines and have Mustie guide me step by step... I know I'd never be able to do it by myself, but I'd learn so much during the whole teardown.... thanks for the videos...so much entertainment...
I'm sitting on 5 1600cc VW crate engines after my dad passed away so you are interested. These have 0.00 hours on them. They have Hobbs meters on them since these engines are made to pump water from field to field for Rice fields
I did that before taking the heads off My '73 Super Beetle I used to have some years ago replaced the heads and the push rod tubes that were leaking while I was reading my "How to Keep Your Volkswagen Alive" Manual. Just another fun experience lol
Just for interest's sake, you commented on how hard it is to find replacement OEM style thermostats and, upon hearing that, it reminded me of a video I saw. Wheeler Dealers mechanic Edd China made the same remark and then used a later design part that had a coil spring mechanism that did the same job and fit with little or no modification. The only problem is, I can't recall which of their videos had that clip, only that it was either a VW or a 4 cylinder Porsche like a 914. I seem to recall, though, that it was a VW part he used.
Reminds me about how I used to do this kind of work one day and have to be ready next day to go to work. Back in the day it cost me 50.00 a head for 1600 dp heads. 1985. Nice to have an engine stand too. I hate to say people throw away those bellows thinking "I dont need that" then wonder why it does not run right.
I used to run a rebuild shop for VWs back in the mid 70s and on a tear down, the first thing to do is crack the head bolts then retorque them to 30 ft lbs (several more than spec, to make sure none of the studs pull out of the case on reassembly. I'd rather have a weak one break BEFORE it's going back together. Same with the bearing bolts on the case. I'd rather add new ones as necessary during the early stages of a repair when it's easier to clean out any metal clips.
Did you replace the paper gasket between the bottom of the jug and the face of the case? Did you lap each cylinder into its matching spot in the head? If not you'll be getting blow-by again.
Why? What about lapping the cylinders into the head? There is no gasket there on this engine and thus you have to create a matched surface to get a good seal.
If you are going to be a mechanic you need lots of tools, and you sure have them mate...Never seen anyone tear down a VW engine before, good stuff. I enjoy your videos, thanks..
Hi, I have a dual carb Porsche 356 replica, but constantly have starting problems. Is this a project you would want to take on to get it to be a daily runner. It is a nice looking car and I would love to drive it around.
had v dub `1600 cc 68 in socal years ago,tried marvel mystery oil for the first time,made that engine just purrrrrrr in a few minutes, replaced spark plug wires whose clips had one that popped off the spark plug top,heater was a little furnace that kept all glass clearclear during cals heavy rains, passed fifty gm current models flooded out by the sides of the sd 405 fwy,ve dub higher clearance kept me out of the fwy swimmin holes
Seeing the blow by problems makes me recall reading about early radial aircraft engines. The article noted that there is not a single example of a successful radial engine which has separate cylinder heads. Perhaps the problems for automotive engines are just more acceptable? Thanks for your videos.
Extremely useful video! Just bought a 66 Bus and having a new engine installed, trying to learn as much as I can. Great teardown. Will there be a part 2?
Nice tools snap on is the best I had alot and my dad just gave most of all his and now I have alot more some older and as old I am. There's just something about using the old tools that has a certain nostalgic feel to it also mine are family heritage I guess I just love them. I do wish I had some of the orange hard handled tools but I guess my dad cheaped out on the extra few bucks all mines standard. Also my brother(s) got to them first and I'm sure took and sold some but I got all the rest which was alot so I'm just happy I got what I got my dad is getting old so I'm so glad I have something to remember him by as well as getting them before my brothers got the rest they can have all the Craftsman lol. I'm sure there's some more here and there but his garage was cluttered so next time I'll hunt the rest he lives an hour and a half away I know he still haves air tools but they are obsolete and space is a premium in my box but he also has another box full still and he said I can half it so can't wait to see what's in it as it was my grandpas.
Thanks for the flashbacks! Drove s 69' Baja and a 70' as my 1st at 15 yrs, till my late 20's. Those cars taught me more that simple wrench turning. Great memories!
Musti the vw and corvair are almost identical. There are excellent instructions on both forums on reconditioning it isn't hard good luck you have an excellent program an exceeding varied.
I love how you take the time to respond to all of the comments it is a really cool thing to do and a lot of people don't do it. Awesome work learned a lot 👍🏿
That is one tired motor Brian has there. Seeing the condition of the cylinder and the burnt piston, I would have done a whole new top end on it. Sometimes though, due to monetary considerations that's not possible, but that motor will never run at 100 percent until you do. The reason I mention this at all is because you were so close.
with a thermostat removed cooling is wide open, and in hot weather the thermostat is is wide open,{same as no thermostat} the problem is when its 1st started up or run in cool weather the engine never gets up to operating tempature, and that causes alot of wear,so it is more important in cold climates.
Not sure what you were cleaning the cylinders with but using compressed air just forces the cleaner and dirt down the sides of the cylinders into the crankcase...also you should wear a respirator as the cleaner is atomized and breathed deep into your lungs... safety first!
The jugs are OK but how much are jug replacement kit now the use to be with in reason bonus was new pistons?, price maybe I would pull the rings off and put Hastings cast rings on the pistons something my dad showed me.
sounded like the tubes where plastic. if worse comes to worse couldnt you take like metal pope cut it down to size and thread it? at least on end looked threaded. also it would be stronger then original?
It's very nice to have you as a camera man....I know it can be difficult to work with someone else , but, the viewer gets to see more stuff ! Maybe you can get someone to film as you work....asking for a friend ! :)
It's interesting, that thermostat. Mexico was making these new until 04, did they change that system out to something else? Otherwise it seems like someone down there would have tons of them.
I love old VW,s easy to rebuild and hop up, some times the local machine shop isnt set up to fly cut the cylinder heads, and ive heard of lapping the sleeve to the head (new sleeve and piston) when doing a rebuild with reconditioned heads (dual port), also the paper gasket between the sleeve and engine case blows out, due to expansion issue,s, im not sure but a stock rebuild engine should have a higher compression , like 130 or at least 10 difference between cylinders, I used to set valve lash when the engine was hot, my 2 cents
Brians new channel, ruclips.net/video/XJAUo5y4jFw/видео.html
15 or 1600.
Had a 1300 66.
I have removed,rebuilt motors, or repaired them in cars ,and trucks,every since I graduated auto. tec. school in 1959,I have never worked on a VW motor,tanks for showing this video,I now feel comfortable enough to overhaul one or a dozen,at 78 you have enlightened me.
I love that instead of just doing it yourself you had Brian do it. It's nice to be able to teach what you know, not so you don't have to but so that others can learn and do it for themselves. Promotes growth for both parties
As somebody who would like to own a Beetle at least once in his lifetime, this video was fascinating. I love watching you work on Bugs as I *always* learn something new about them.
I like the fact the thermostat and flaps were left on, so many people throw that stuff out! The vacuum advance was a nice sight as most want to drop in a 009. I've had good luck with T-3 lower cooling tin when a J-tin with good holes wasn't available. The extra big catch-all on the floor is a nice feature. Not everyone does, but when re-using pistons and cylinders I like to hand lap the cylinders into the heads.On the thick wall cylinders I like to use the ball hone to give the rings another set and I permatex the cylinder bases onto a cleaned block surface
have an 88 Westfalia and so, started watching your channel because of what you did for your parents. Very nice of you. Appreciate what you do.
Your workshop is a godsend, you can take your time and miss nothing.
No rushing because of freezing fingers and crappy weather.
Brian is lucky to have you as a frend :-).
really enjoy VW builds. never owned one or have one but i just appreciate the simplicity of the engine and find it fascinating. thanks for sharing
Its my dream to be a skilled mechanic, these videos keeps me glued absorbing it step by step, thanks!
LMAO WOW, That's something new to me... "self tapping screws " to hold exhaust to the head..
🤯🤯🤯
I have watched many of your videos,from your snowblower repair,gen repair, ohh hell I have watched a ton of them and they are super great, your trouble shooting techniques are damn close to what I would do. I picked up a tip in one of your other videos and again I watched it being used here and that is using the rag around the bail and pulling downward, I have scratched up many a nicely painted valve cover using a screwdriver . I like your can do attitude and especially your willingness to show others how it's done.
Tell Brian that a few years ago I tried to drive my 68 VW year round but one month into a Montana winter, I felt like I was driving inside a snow globe. and me being 62 and haveing crap joints I headed south
Best of luck to you, from New Mexico
l love the snow globe reference,
It's nice to see a younger generation work on these wonderful VW's....I often anticipate your next move or the tool your looking for or going to get.....Retired Mech........John.
I love your videos. Thank you for handing down this information to the younger generation. It's important we don't forget how to work with our hands.
Loved this one.. LOL @ 11:35 "I learned this trick watching Mustie1 videos." That one had me giggling.
Dude, you're kinda the Bob Ross of auto mechanics.
No, that is objectively wrong.
Its always fun to watch an engine teardown with you Mustie!
I can't get ENOUGH of your videos!! By far the best Dub channel. Not to mention your patience lol, always in a good mood. Glad I stumbled across your channel. Be blessed!!
A couple of vw engines I built, I installed adjustable/expandable push rod tubes, after market of course, if one leaks just expand it out and tighten it up.
Mustie, love your vids! Only thing for me that would make them better is to go into a bit more detail about the what, why, and how of what you're doing/using. I'm a newbie to engine repair, so any additional info would be much appreciated!
When I was stationed in Germany many years ago, we used to rebuilt VW engines then race them out behind the motor pool. Brings back memories. THX for the videos.
The cylinder heads shown in the beginning of the video are 40 HP. 1200 CC heads and you probably noticed that later. I was surprised to see that the cylinder/head joint had broken seal, that wasn't that common on the single port motors, but fairly common on the dual ports. It's nice to see you're using the air doors and thermostat, the engines wear out much quicker when they're left out. You also lose 6-8 Hp. when they're not there.
why not drive it year around? I know rust might become an issue but in the fall and spring, you can oil coat it. I would like to build one up for my daughters first car and it would be driven year around, and im in Iowa so it does snow here.
Mustice I am sure you know this so don't take offense. Volkswagen recommends putting in new exhaust valves do to cyrsitalizaisn from heat over years of use and 100 of 10000 of Rpm's. Also if you do your own heads and ever have an issue with valve guides they can be almost impossible to remove with a shouldered punch but you can tap them with a fine thread 3/8 TAP AND INSTALL A BOLT. AT THIS POINT SET ON A 4X4 BOARD HEAT THE HEAD AND PUT A PUNCH INSIDE THE GUIDE AND DRIVE AGAINST THE BOLT. WORKS FANTASTIC TO REMOVE GUIDE. I WORKER FOR YEARS IN A AUTOMOTIVE MACHINE SHOP AND USED THIS WITH A GREAT DEAL OF SUCESS. REALLY ENJOY YOUR VIDEOS!!!!!
How do you check the top surface of that one jug with blow-by? I thought maybe you would have pulled that jug off and lapped the top face of it to check it was completely flat before assembling it with the replacement head.
hey Mustie do you ever check the top surface of the jugs on a flat plate that area that had the blow by can be cleared up with a sheet of emmery on a sheet of tempered glass , all so keep a spare jug to lap the head mating surface too with a little blueing and valve grinding compound, always good for a few more lp's of compression
Another great video luv the quickly rebuild I'm new to the vw world as I just put my first vw together (70 convertible) I learn so much from what you know and how you share it all with us always looking forward to what's next ...thank you!!!
welcome aboard
As much as I enjoy all the other shenanigans and escapades, watching Mustie working on anything VW are, by far, my favourites. This one was ...interesting.
Nice video. First time I've watched a semi tear down on a VW. Neat motors.
Reminds me of when I took my '74 1200 Beetle engine apart to replace the conrods! (The little ends were shot) I remember using a copper coin (2 pence in the UK) to clean the piston crown!
Also, no new pushrod tubes, just a good clean and a gentle stretch before installing.
"Just throw that anywhere" You crack me up Mate!!☺
805ROADKING hey Mr roadking what are you doing wondering around youtube, you are supposed to be working on the water cooled Briggs lol, I am one of you're subscriber's btw
Gotta support the troops!!☺
wait tilll the water cooler goes on
Mustie1
Luv them 67. Big $. Stock.
I just ran to the kitchen quickly to get some snacks, has it started yet? This is gonna be awesome! :)
That shows how tough those little Volkswagen air cooled motors are. Most water cooled engines would have serious running issues with problems like that one had, but the VW just keeps on going. Going slowly, but going...
Living on the Gulf Coast, I have never even thought that people have to shovel out their truck before using it........
Actually that's a good trick for getting traction on snowy roads. Fill up the bed with snow, it will put weight over the drive wheels, and when it warms up enough that you don't need it...it goes away, all by itself!
I gain so much knowledge from your videos, thank you and keep up the great work
I think it would be fun to have one of these engines and have Mustie guide me step by step... I know I'd never be able to do it by myself, but I'd learn so much during the whole teardown.... thanks for the videos...so much entertainment...
I'm sitting on 5 1600cc VW crate engines after my dad passed away so you are interested. These have 0.00 hours on them. They have Hobbs meters on them since these engines are made to pump water from field to field for Rice fields
I did that before taking the heads off My '73 Super Beetle I used to have some years ago replaced the heads and the push rod tubes that were leaking while I was reading my "How to Keep Your Volkswagen Alive" Manual. Just another fun experience lol
Just for interest's sake, you commented on how hard it is to find replacement OEM style thermostats and, upon hearing that, it reminded me of a video I saw. Wheeler Dealers mechanic Edd China made the same remark and then used a later design part that had a coil spring mechanism that did the same job and fit with little or no modification. The only problem is, I can't recall which of their videos had that clip, only that it was either a VW or a 4 cylinder Porsche like a 914. I seem to recall, though, that it was a VW part he used.
Since the old style VW was built for some many more years in Mexico and Brazil aren't OEM spares available from dealers down there ?
I had a 66 and a 67 Van and a 66 Bug. back in the 70's and 80's Kool cars I love them!
Reminds me about how I used to do this kind of work one day and have to be ready next day to go to work. Back in the day it cost me 50.00 a head for 1600 dp heads. 1985.
Nice to have an engine stand too.
I hate to say people throw away those bellows thinking "I dont need that" then wonder why it does not run right.
I love the 1600 sp much better more torque and no cracking between valves and spark plug hole.
I used to run a rebuild shop for VWs back in the mid 70s and on a tear down, the first thing to do is crack the head bolts then retorque them to 30 ft lbs (several more than spec, to make sure none of the studs pull out of the case on reassembly. I'd rather have a weak one break BEFORE it's going back together. Same with the bearing bolts on the case. I'd rather add new ones as necessary during the early stages of a repair when it's easier to clean out any metal clips.
very nice. love those vw,s. they were always ahead of the curve back then. you def know your VW,s. poor stuck quad. lol dam
Did you replace the paper gasket between the bottom of the jug and the face of the case?
Did you lap each cylinder into its matching spot in the head? If not you'll be getting blow-by again.
l leave the paper out,
Why?
What about lapping the cylinders into the head? There is no gasket there on this engine and thus you have to create a matched surface to get a good seal.
In Minnesota we just let the 63 degree weather melt that stuff! Aloha from the Waikiki of the north! ( Back to reality on Friday!)
it's fun turning wrenches when you know what you're doing and sometimes when you don't!
Out here in California when we were working on these in the 1970s, we just pitched the thermostats. In our climate they warmed up quick without them!
As in Australia !!
If you are going to be a mechanic you need lots of tools, and you sure have them mate...Never seen anyone tear down a VW engine before, good stuff. I enjoy your videos, thanks..
THIS is awesome! Sharing of knowledge is GREAT! I love that you're taking the time to tell Brian how to bust down that engine the right way.
Hi, I have a dual carb Porsche 356 replica, but constantly have starting problems. Is this a project you would want to take on to get it to be a daily runner. It is a nice looking car and I would love to drive it around.
Thank you. Imparting knowledge is a gracious deed, a master can do to a student. You did it.
Thanks again, Sir.
. The Bug engine is quite an amazing engine , once you see it torn down and reassembled like this ...Thanks for posting
I understand priorities. But glad to see those heads getting the love they needed from the last video.
The usual very enjoyable watch, thanks Darren for your You Tube videos, always fun and instructional 👍🔧⚙️🪛
had v dub `1600 cc 68 in socal years ago,tried marvel mystery oil for the first time,made that engine just purrrrrrr in a few minutes, replaced spark plug wires whose clips had one
that popped off the spark plug top,heater was a little furnace that kept all glass clearclear during cals heavy rains, passed fifty gm current models flooded out by the sides of the sd 405 fwy,ve dub higher clearance kept me out of the fwy swimmin holes
Thanks Mustie. I'll take a look at Brian's channel too.
I like that you have them do the work so they will know more.
Seeing the blow by problems makes me recall reading about early radial aircraft engines. The article noted that there is not a single example of a successful radial engine which has separate cylinder heads. Perhaps the problems for automotive engines are just more acceptable? Thanks for your videos.
Extremely useful video! Just bought a 66 Bus and having a new engine installed, trying to learn as much as I can. Great teardown. Will there be a part 2?
congrads on your bus
Nice tools snap on is the best I had alot and my dad just gave most of all his and now I have alot more some older and as old I am. There's just something about using the old tools that has a certain nostalgic feel to it also mine are family heritage I guess I just love them. I do wish I had some of the orange hard handled tools but I guess my dad cheaped out on the extra few bucks all mines standard. Also my brother(s) got to them first and I'm sure took and sold some but I got all the rest which was alot so I'm just happy I got what I got my dad is getting old so I'm so glad I have something to remember him by as well as getting them before my brothers got the rest they can have all the Craftsman lol. I'm sure there's some more here and there but his garage was cluttered so next time I'll hunt the rest he lives an hour and a half away I know he still haves air tools but they are obsolete and space is a premium in my box but he also has another box full still and he said I can half it so can't wait to see what's in it as it was my grandpas.
I bet Brian likes the help from the been there, done that guy. :) Killer ending, that sticker. Huge LOL here!
Thanks for the flashbacks! Drove s 69' Baja and a 70' as my 1st at 15 yrs, till my late 20's. Those cars taught me more that simple wrench turning. Great memories!
Antique engine newer style heaters............. Nice!
Thanks for taking us along.
My '67 bus is in good shape but needs a massage.
I'll keep watching.
Getting out the mice nests now
Great videos.
Winch man, snow shovel man, Damn... Brian does it all!
not dishes
How about window's?
Nice Bug , I would like to see if it is possible to put a motorcycle clutch on the shifter. I’m missing a left leg
Man! I THOUGHT I was good at bringing stuff back from the dead. But you my friend are gem to learn from. New Sub. and many thanks!
Musti the vw and corvair are almost identical. There are excellent instructions on both forums on reconditioning it isn't hard good luck you have an excellent program an exceeding varied.
I am sorry the thermostat for both vw and corvair are almost identical.
Very educational. Thanks for posting.
Love your vids I learn so much thank you!!!
I love how you take the time to respond to all of the comments it is a really cool thing to do and a lot of people don't do it. Awesome work learned a lot 👍🏿
when l have time,
That is one tired motor Brian has there. Seeing the condition of the cylinder and the burnt piston, I would have done a whole new top end on it. Sometimes though, due to monetary considerations that's not possible, but that motor will never run at 100 percent until you do. The reason I mention this at all is because you were so close.
Question: as a kid I remember a lot of bugs had a kind of whistle in their exhaust note. Was that the heads leaking?
It's funny. In Florida practically no engine still has the thermostat on it. Then again the high here is 80 today.
its a cold weather thing
JOSEPH JAKUBEC why especially in a hot climate?
with a thermostat removed cooling is wide open, and in hot weather the thermostat is is wide open,{same as no thermostat} the problem is when its 1st started up or run in cool weather the engine never gets up to operating tempature, and that causes alot of wear,so it is more important in cold climates.
Is their a difference between a vw bug and a vw van engine. Reason I ask is I just bought a 1969 vw van and the motor is locked tight.
69 bus should be almost the same as this,but t has what is called a mustache bar, that attaches to the engine and it has motor mounts on it
Ok thanks. Please is there any difference between the type 1800 and the 1835?
Brian: "PLLEEAASSEE mistah mustie, can't I use the cordless impact??"
Mustie: "NO! Noobs get hand tools. Maybe when you graduate..."
More fun to watch than prime time TV!
How many of those V.W. engines do you think you have torn down?
in the 80s one a day
Not sure what you were cleaning the cylinders with but using compressed air just forces the cleaner and dirt down the sides of the cylinders into the crankcase...also you should wear a respirator as the cleaner is atomized and breathed deep into your lungs... safety first!
Fun project. Thanks for sharing!
You used the air tool with the wire brush on the sleeve of the piston?? (Horror emoji)
The jugs are OK but how much are jug replacement kit now the use to be with in reason bonus was new pistons?, price maybe I would pull the rings off and put Hastings cast rings on the pistons something my dad showed me.
the quality of what is available now is real poor
sounded like the tubes where plastic. if worse comes to worse couldnt you take like metal pope cut it down to size and thread it? at least on end looked threaded. also it would be stronger then original?
no threads on the tubes,, press fit, tubes are longer than assembly distance and squish down to a tight fit amish hitman dude
Blew a sealing ring! Personally I didn't know these used sealing rings; I thought it was something you only found on big stationary/marine engines.
Wouldn't wire brushing the piston heads with them installed run the risk of getting metal filings down the sides of the cylinders...
if metal is coming off you have bigger peoblems
It's very nice to have you as a camera man....I know it can be difficult to work with someone else , but, the viewer gets to see more stuff ! Maybe you can get someone to film as you work....asking for a friend ! :)
Great lesson. many thanks.
Another great tuturial thanks from the netherlands !
Mustie 1 NEED the closed captions, Please consider always including this help to your hearing impaired fans.
It's interesting, that thermostat. Mexico was making these new until 04, did they change that system out to something else? Otherwise it seems like someone down there would have tons of them.
they have been used up
That's crazy, though I guess there are a ton of them still on the road.
Going to use a lead substitute or exhaust valve job?
How much does the snow effect your gas milege?
It's such a great engine to work on.
I would love if you would just point out what I need to do with my Baja VW bug outside
Mustie could rebuild one of these with his eyes closed
I had a 73 standard bug flat windshield That I drove year round no problems.
I love old VW,s easy to rebuild and hop up, some times the local machine shop isnt set up to fly cut the cylinder heads, and ive heard of lapping the sleeve to the head (new sleeve and piston) when doing a rebuild with reconditioned heads (dual port), also the paper gasket between the sleeve and engine case blows out, due to expansion issue,s, im not sure but a stock rebuild engine should have a higher compression , like 130 or at least 10 difference between cylinders, I used to set valve lash when the engine was hot, my 2 cents
Love the vid[s] - but that focus is killing me...! LOL
(keep 'em coming)