Fix avrdude: stk500_getsync(): not in sync: Error In Arduino

A video on how to fix the avrdude: stk500_getsync(): not in sync error.

[@RickSaffery]

You're the man! I followed your guidance step-by-step. My getsync() issue is resolved. Thanks for posting this very useful video!

[@IrfanKhan-vu5ln]

Hi bro ,as you said that if any error related to signature than whats the procedure to clear please tell me once again,
like where to change from 0x14 to 0x0F

[@gamingustaad0084]

Some days ago I don't have two board so I watch all videos in youtube but no one work this video is working thank you so much sir

Thanks a lot! I went through other videos and forums. Reinstalled Arduino IDE. Nothing helped. Some of the forums said, the microcontroller might be dead, so I ordered 2 Atmel microcontrollers. Changed them. Nothing worked. Was about to throw my original Arduino Uno R3 away wondering how come the original Uno R3 last so little compared to Chinese clones. Your video solved it. I wonder the video solution is not on the top lists or forums.

[@SidsEClassroom]

Glad you revived your Arduino. A crappy ultrasonic sensor caused this issue for me.

[@samithabandara5607]

You are the man who did this correctly, May you triple gem bless you !

[@johndanielcimanes7832]

I'm getting an error in terms of avrdude thingy and this video helped me. THANKS, MAN. Now, my arduino nano is working ^__^

[@matthewprater7892]

Great job Sid! Good work, this is a reference for my lab notebook!

[@aguswisnu879]

are u saying x fourty or fourteen when I using atmega328p?

[@alimoharam4362]

This video helped fix my Arduino Nano using my Arduino Uno thank you so much❤❤❤❤❤

[@funnytubepro237]

Thank u soooooooo mush bro , it's like a magic , I think my arduino is broken, but after seeing your video I do it , it works😊

[@happyrabbit7944]

I got the same issue and I just resoldered all the pins on my arduino nano and It solved the issue

[@priscillamaturan9392]

Hi Sid! From your pin-to-pin connection (master-to-slave), pin10 of master is connected into what pin of slave? Sorry I can't understand a bit for that particular part. Thanks in advance for the response

[@SidsEClassroom]

10 of master goes to reset of slave

[@SHANUSHAH]

Good Video , I used Arduino UNO to fix faulty bootloader on Arduino Nano, It's works well, thank you .

[@itsdoeki]

i've made change signature to 0F for my 328P but still error :( can you help me

[@amadivictor1005]

What if I just have another arduino uno, can’t I just plug it in and try upload to the new arduino? Or, must I go still do the master-slave thinggy?

[@safadelican]

PERFECT!! THANK YOU SO MUCH

[@barskir]

Worked for me! I had to turn on verbose upload mode to get it work eventually

[@GD_902]

Thank you for the solution. It fixed my problem!

[@shantanutiwari9330]

i have not another arduino plz help .

[@cowfootman]

Superb video! Many thanks for your help!

[@yoyokarthik4817]

Then i need another arduino

[@gamingustaad0084]

Working

[@reubenkriegel7639]

Please help, can't find the avrdude files. Done a full system search.

[@martyacudecabel3362]

Sir i encounter same problem but in my avrdude file, we are not the same as you have discussed. Help me sir i doing my thesis rn

[@avtarsingh-uc9tj]

Arduino: 1.8.9 (Windows 10), Board: "Arduino/Genuino Uno"
avrdude: stk500_recv(): programmer is not responding
avrdude: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.
Error while burning bootloader.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

[@weihenstephaner]

you are the king it works thanks bro !

[@jaydeepparmar5085]

If I use Arduino MEGA with Arduino UNO.. then this will work..?

[@TheGamingDinosaurRoblox]

whats the point if you already have a difrent arduino

[@mangapedia5564]

Can I fix arduino nano by arduino uno by the process you did?

[@srinivasprasanth8703]

bro,Is there any way to fix the board without another board??

[@funkydevil13]

Hi sir very nice video. I am getting same error eveytime while uploading. I have two Arduino Chinese clone both are not working. Then what could be the solution.??

[@jannita6141]

Perfect. Thank you!

[@ruwiniasangika4691]

Supper im srilankan
my arduino bord is not working whats ploblot it

[@ragipaninikhil7798]

can u help me the same problem with lillypadaurdino?

[@iod1466]

It worked! Thank you!!

[@lCreatived]

Does it works with arduino nano?

[@ksshruthi6440]

Sir 1) Atmega328
Part id 328
We also have 2) part parent 328 here it is 0f only where to change in 1 or 2

[@mojojojo8133]

Hi sid..im doing a project on rfid using egizmo rifd card reader 2 and arduino uno...please help me on how i set up the wiring and some of your codes and how to use rfid..thank you in advance for the help.. :)

[@dilshaddil9294]

bro thanks a lot
its perfect
🥰🥰🥰🥰🥰

[@parassharma3155]

Thanks alot sir 🥹

[@amadivictor1005]

Bro, does this method still work please?

[@-karthika-ECE]

Bro thanks bro you saved my life🥳🥳

[@latechnologie2803]

please can you give me the wiring diagram (image)

[@audiokees4045]

I did use USBasp to burn the bootloader into the chip, did work fine, but get still the sync error, so I go connect a extra supply.

[@bourasihabe]

Same probleme witht me

[@anshvyas65]

Thanks bro really workssss
!!!!

[@RAHULGUPTA-dt6yd]

Great job buddy 👍

[@melvi8834]

Ciao ho appena avuto il tuo stesso problema, ho risolto così: quando selezioni la porta e la scheda da strumenti, seleziona processore ATmega328P (Old bootloader) invece di ATmega328P.
Hi I just had your same problem, I solved it like this: when you select the port and the card from tools, select ATmega328P (Old bootloader) processor instead of ATmega328P

[@reyan2009]

THANKYOU SO MUCH MARCO MARCO

[@tswoshman0016]

Can´t hear anything ! Is there sound ?

[@supersayianz]

What if I dont have a spare arduino board? I only have the board that is not in sync...

[@SHANUSHAH]

You can use another Arduino Nano to fix your Arduino UNO.

[@noorstudio3519]

Thankyou bro you helped me.

[@manoelmanev9501]

thank y my brada

[@sujeshkumar8219]

I'm using Arduino lillypad ...I get this error while uploading..
What to do?

[@hemanthgirimath1332]

Same help needed

[@avtarsingh-uc9tj]

this is not working even after bool loader done why ??

[@avtarsingh-uc9tj]

where can i add signature error

[@DreThePlug]

Amazing Video you just saved my board ! Lucky I had a extra Arduino board just laying around ahah check out my content if you ever get the chance! Thanks again.

[@mifo1133]

do i have to have same type of the board? like UNO+ UNO? because i have only broken UNO and working mini

[@SidsEClassroom]

You can use whatever board you have. But need to match the pins properly.

[@mifo1133]

thank you a lot my friend i done it sucefully arduino nano as master and UNO slave but unfortunelly it does not solve my problem still same error :(

[@SidsEClassroom]

May i know as to how you connected ? or what changes you made to the program ?

[@mifo1133]

i dont make any change in program code just as you did in video. it message me "Done burning bootloader" so i thought it should be done right or im wrong?
connections:
13 - 13
12 - 12
11 - 11
10 - reset
5V - 5V
GND - GND
as it is in www.arduino.cc/en/Tutorial/ArduinoISP also in your video
anything i did wrong?

[@SidsEClassroom]

i guess connections are correct. Can you exactly mention the error that you are getting. Also press the reset button on UNO board and let me know what the LED does.

[@mkvmk1372]

as per your video Fix avrdude: stk500_getsync(): not in sync: Error In Arduino, my mistake both ardiuno got same problem( not uploading ) bootloader error , how to rectify , to test i brouhgt a new ardiuno uno same at328p-pu , ( the new one also have same problem

[@Adi-mq3pt]

Me toooo

[@brahmanaindra7970]

Thank you very much

[@sheriffola]

Thanks man!

[@abpccpba]

Thanks Sid.

[@priscillamaturan9392]

Thanks! I'll try this

[@pradeepgangolli5496]

Thanks very much

[@1998vitaliy]

thank you very much !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! you save me

[@rajmeetsingh1625]

thanks , you save my arduino ...................

[@fauzifarhat6910]

THANKS A LOT!!!

[@afnasali2006]

Thanks bro

[@ismayilabuzerov8598]

THANKS THANKS THANKS A LOT

[@zulaikhasaadon8926]

can i use arduino pro mini with arduino pro mini

[@SidsEClassroom]

Yes.

[@SHANUSHAH]

you also use another Arduino Uno or Nano

[@ahsanwaheed3347]

I don't have 2 arduino boards

[@saravananb8572]

thank u

[@dolorescortezcastillo9912]

thanks man very useful now i dont need to buy a new arduino :D

[@pankajkubde7886]

Not working

[@rishabh1702]

it's not working @)

[@Suni777]

Just Change port com15

[@raghulprasanth6024]

By following this method can damage the code in working arduino

[@multitech1719]

I dont have working arduino. What is the next possible solution pls

[@SHANUSHAH]

Try using Nano, I have done that works well.

[@yeungtc2002]

you save me bro, thank you very much

[@rhythmdwivedi3763]

not helped

[@minoruapologetics3470]

pin no 10 to what sir?

[@devan.a]

reset pin bro

[@greymount8160]

you are not audible . kindly speak close to mic,