While this video didn't solve the root cause of the problem with my Nano's setup directly it did lead to the cause after observation when trying to re-flash the bootloader. The power led was lit then slowly dimmed down. The problem I was having was that I hooked up my Nano with the VIN pin. This was effectively making the Nano try to power other circuitry making it impossible to load code and throwing this error. Once I slapped a diode in there all was right with the world and the Nano was then programmable again. Thanks for taking the time to make this video!
I had the same problem, but was able to use the Chinese NANO by selecting the "use old bootloader' option when downloading a program. Using the old bootloader uses more memory, (about 1.5 KB more), compared to the new one, but if your program can fit into 30KB or less, there will be absolutely no difference in the results.....
Hello! I have a JGAurora 3D printer with a main board not specified in arduino. It’s called a MPX_PRO_V3. I accidentally flashed the printer and ended up bricking the board, resulting in the two white bars. I did buy a usbasp for the unbricking process, but everything I try fails. How do I burn a bootloader to the board using a usbasp? Or would I have to get an arduino nano? Thanks in advance!
I made a video on how to flash an Arduino bootloader using a USBasp. I don't have a MPX v3 motherboard but all Arduino boards have to same ICSP connectors. ruclips.net/video/jgHIFWPUe_M/видео.html
my arduino NANO only works if you select the old bootloader. listening to your instructions was all i did and....BOOM! now my nano can upload sketches without setting it to the old bootloader! expecting more arduino tutorials from you bro! my problem now is how to thank you...couple of beers perhaps?! :)
I can't thank you enough!!! You've no idea how much horseshit I've gone trough before I hit your video!!!! Thank you for sharing!! Best tutorial on bootloader burning!!
In some cases, like mine too, a single usb is not enough to power two arduino nano. I think is good to mention in your video if you can. Thank you for the video
so what you and others are saying is that without a working arduino of some kind you can't update a bootloader on a nano. i have two nano's and must specify Atmega328P (Old Bootloader) in order to upload a sketch. No problem. But when I updated to the library TFT_ILI9163C-Pre-Release-1.0p7. It doesn't work anymore. I get a clean compile followed by a clean upload but the the red light on the nano just flashes very fast. I tried fitting a 3V3 level converter but it made no difference. So I have ordered another more expensive Nano which hopefully will have the new bootloader. Thank you for an excellent video.
hi their i tried the same thing , i have a Chinese one as well and it wont upload rx blinks barely and idk what i can do i tried the boot loader what else can i try and FYI i was making a cnc drawing machine after i hooked it up to a 12v it wont upload anything pls help
I found a trouble: avrdude: Expected signature for ATmega328P is 1E 95 0F Double check chip, or use -F to override this check. Error while burning bootloader. how to fix it?
Hey. I have a problem with one of those Arduino Nano. When I plug it in my computer. It does nothing. No sound of it going in. The lights on Arduino is on. Nothing in device manager. No new devices pops up. I installed the correct drivers.. for the chip. When I installed the drivers it said preinstalled. Not installed successfully like I have seen all over the internet. Really need help. Thank you.
Try a different USB port or computer if you have one. Also try the official drivers for the Arduino. www.ftdichip.com/Drivers/CDM/CDM%20v2.12.00%20WHQL%20Certified.zip See this website www.rastating.com/installing-drivers-for-an-arduino-nano-in-windows/
You see to install that drivers I need to see the Nano in my device manager. I do not see it at all. I see no unidentified device. I also checked the whole device manager and checked if anything was added when i plugged it in just in case the computer recognized it as something else. I have tried different computer and different cables.
Does the Nano detect in the Device Manager? If not load the drivers. Try a different USB cable which you know works with data and not just a phone charging cable.
I got problem. avrdude: Expected signature for ATmega328P is 1E 95 0F Double check chip, or use -F to override this check. Error while burning bootloader. the connection are correct.
@@MrDabrudda "(A bootloader, very simply, is a programme that sits on the chip and manages the upload of your sketches onto the chip)" Once this is done the chip would work ona battery and send information , withb luetooth as example) to another device?
In Arduino IDE ensure the comms port is set correctly. Ensure the windows drivers are installed. www.wch.cn/download/CH341SER_EXE.html to download the drivers. Reboot after the install. Also try running the Arduino IDE "as and administrator".
As i read in a stackexchange discussion, "I think the main problem is the upload speed. The "old bootloader" version successfully uploads at 57600, but the default "new" version tries to upload at 115200 and fails."
You deserve more than just my like and subscribe! Thank you so much, all it took was 8 minutes, haha; I wish id seen this video many, many frustrating hours ago!
Hi All ! Don't you like it when there is no audio (or loud trash electro music) and you have to guess what the person is doing .. and why? Mr. Dabrudda, you video was useless to me !! Too bad !
I'll be sure to have to annoying open source music playing in the background, my kids screaming, my dog barking, my smoke alarm chirping and the sound levels really really low next video.
I'm glad you took this comment constructively. This is the right attitude to adopt. Oh! I forgot. Make the video 340p .. and speed it up about 4 to 8 times!
@@oncledan282 Sarcasm on the obvious issues other videos are mysteriously given praise for. Add this valuable style. Make sure to drink a lot of coffee so you have the camera shakes or slap the camera every 5 seconds to get that authentic DIY perspective.
While this video didn't solve the root cause of the problem with my Nano's setup directly it did lead to the cause after observation when trying to re-flash the bootloader. The power led was lit then slowly dimmed down. The problem I was having was that I hooked up my Nano with the VIN pin. This was effectively making the Nano try to power other circuitry making it impossible to load code and throwing this error. Once I slapped a diode in there all was right with the world and the Nano was then programmable again. Thanks for taking the time to make this video!
I had the same problem, but was able to use the Chinese NANO by selecting the "use old bootloader' option when downloading a program. Using the old bootloader uses more memory, (about 1.5 KB more), compared to the new one, but if your program can fit into 30KB or less, there will be absolutely no difference in the results.....
I had a functioning uno and was able to use it (and your instructions) to fix 2 nanos from china. Now I can run GRBL. Thanks for a great video.
Hello! I have a JGAurora 3D printer with a main board not specified in arduino. It’s called a MPX_PRO_V3. I accidentally flashed the printer and ended up bricking the board, resulting in the two white bars. I did buy a usbasp for the unbricking process, but everything I try fails. How do I burn a bootloader to the board using a usbasp? Or would I have to get an arduino nano? Thanks in advance!
I made a video on how to flash an Arduino bootloader using a USBasp. I don't have a MPX v3 motherboard but all Arduino boards have to same ICSP connectors.
ruclips.net/video/jgHIFWPUe_M/видео.html
my arduino NANO only works if you select the old bootloader. listening to your instructions was all i did and....BOOM! now my nano can upload sketches without setting it to the old bootloader! expecting more arduino tutorials from you bro! my problem now is how to thank you...couple of beers perhaps?! :)
I can't thank you enough!!! You've no idea how much horseshit I've gone trough before I hit your video!!!! Thank you for sharing!! Best tutorial on bootloader burning!!
Does the new arduino ide come with option of old bootloader?
In some cases, like mine too, a single usb is not enough to power two arduino nano. I think is good to mention in your video if you can. Thank you for the video
so what you and others are saying is that without a working arduino of some kind you can't update a bootloader on a nano. i have two nano's and must specify Atmega328P (Old Bootloader) in order to upload a sketch. No problem. But when I updated to the library TFT_ILI9163C-Pre-Release-1.0p7. It doesn't work anymore. I get a clean compile followed by a clean upload but the the red light on the nano just flashes very fast. I tried fitting a 3V3 level converter but it made no difference. So I have ordered another more expensive Nano which hopefully will have the new bootloader. Thank you for an excellent video.
hi their i tried the same thing , i have a Chinese one as well and it wont upload rx blinks barely and idk what i can do i tried the boot loader what else can i try and FYI i was making a cnc drawing machine after i hooked it up to a 12v it wont upload anything pls help
thank you very much for sharing your knowledge, you saved my nano boards (yup i've bricked two of them and now they are back to live). thanks a lot!
Thank you very much! It worked! My arduino is now alive!
I found a trouble:
avrdude: Expected signature for ATmega328P is 1E 95 0F
Double check chip, or use -F to override this check.
Error while burning bootloader.
how to fix it?
Is your processor an ATMega329P or an ATMega329PU or ATMega329PB? That will make the flash fail if not selected correctly.
@@MrDabrudda atmega328PU smd
it really helped me bring my arduino back to life, thank u
do i need another working NANO, or can i use any arduino? i got a working UNO.
Any Arduino will work as long as the wires are hooked up correctly
Hey. I have a problem with one of those Arduino Nano. When I plug it in my computer. It does nothing. No sound of it going in. The lights on Arduino is on. Nothing in device manager. No new devices pops up. I installed the correct drivers.. for the chip. When I installed the drivers it said preinstalled. Not installed successfully like I have seen all over the internet. Really need help. Thank you.
Try a different USB cable you know works for transferring data from your phone or other device. Windows 10 should install the drivers automatically.
MrDabrudda I have tried 3 cables already that all works.
Try a different USB port or computer if you have one. Also try the official drivers for the Arduino.
www.ftdichip.com/Drivers/CDM/CDM%20v2.12.00%20WHQL%20Certified.zip
See this website
www.rastating.com/installing-drivers-for-an-arduino-nano-in-windows/
You see to install that drivers I need to see the Nano in my device manager. I do not see it at all. I see no unidentified device. I also checked the whole device manager and checked if anything was added when i plugged it in just in case the computer recognized it as something else. I have tried different computer and different cables.
And I don't even hear a sound when i plug it in like if i plugged in any other device.
what if i dont have another arduino
can i do with uno one?
Yes an Uno would also work.
Thanksss...i tried and revive 14 arduino nano dead and it's worked.
You are the Best,
i have updated my 5 Chinesse Nano on the New Bootloader without problem. Selecting the (Old Bootloader) is over!
Thanks it really worked, just followed the steps. My led was not blinking as fast before but it still worked
Got error (Programmer-UNO R3, Target-Nano ver 3) "Avrdude stk500_disable(): unknown response=0x12"
can you help with a nano that all it does is the led just flashes red thats it and it wont let me upload to it...
Does the Nano detect in the Device Manager? If not load the drivers. Try a different USB cable which you know works with data and not just a phone charging cable.
use old bootloader option
I got problem. avrdude: Expected signature for ATmega328P is 1E 95 0F
Double check chip, or use -F to override this check.
Error while burning bootloader. the connection are correct.
Try this work around
www.instructables.com/id/Bootload-an-ATmega328/
@@MrDabrudda "(A bootloader, very simply, is a programme that sits on the chip and manages the upload of your sketches onto the chip)"
Once this is done the chip would work ona battery and send information , withb luetooth as example) to another device?
Thank you, that is very helpful and saves lots of time for research.
Glad it was helpful!
avrdude: Expected signature for ATmega328P is 1E 95 0F
Double check chip, or use -F to override this check.
Error while burning bootloader.
i feel you
I keep getting message I dont have permissions and cant communicate , what can i do to get round this?
Are you using Linux or Windows?
windows 10
In Arduino IDE ensure the comms port is set correctly. Ensure the windows drivers are installed. www.wch.cn/download/CH341SER_EXE.html to download the drivers. Reboot after the install.
Also try running the Arduino IDE "as and administrator".
So basically all the Arduino clones from China come with no Bootloader on them?
Some do and some don't. I have no way to check if the bootloader is installed.
Thank you so much! My Arduino Nano is finally working again.
My Nano recovered. Thank you
As i read in a stackexchange discussion, "I think the main problem is the upload speed. The "old bootloader" version successfully uploads at 57600, but the default "new" version tries to upload at 115200 and fails."
Can you explain more?
I have the same problem
so... if i have just 1 arduino cant fixed??thanks
Right you need 2 arduinos
@@MrDabrudda and with a raspberry pi 2 ?? that will be posibly?
what if i dont have another arduino just the nano thats not working?
You can use an FTDI module or any kind of Arduino.
@@MrDabrudda hey thanks I already fixed i just had to click the old bootloader option in processor
So that was much more simpel than I thought, thank you ;)
can you use an Uno to flash a Nano?
You should be able to.
Very very done. thank you so much guest...
Thanks it works for me, en my board is working again. !
Thank you!! My Nano works again!
Thanks, you saved my arduino nano !!
You deserve more than just my like and subscribe! Thank you so much, all it took was 8 minutes, haha; I wish id seen this video many, many frustrating hours ago!
Thank you very much, you saved my board.
Can you flash grbl 1.1 onto a nano
Probably not unless you program it in the Arduino IDE and upload it.
I used to flash my ender 3, ty for the video
Thanks for this great video!!! your an angel.
Made my evening! Thank you!
Thank you very much dear😍😎
Welcome 😊
Nicely done.
windows XP?
Windows XP has not been supported since 2014. Time to upgrade.
can i have a code for reflash
thanks, now I can use again my arduino nano which
I guess it dead one or two years ago
Thank you so much..... ❤
Thanks a lot its working
Thanks sooo much
It works! Thank you
weird couln'd upload and then i tried for fun old bootloader somewhere and it worked >_>
wtf
are you james hetfield? jajajajaja
Thanks dude!
very very thanks
Thanks...
Welcome
THANK YOU!
Sir plz make a video for Arduino uno
It would be pretty much the same. Same pins on the Uno.
Change Prosessor to Old bootloader, then it works
You should still update the bootloader to the latest version. With this Arduino Nano it work previously and stopped working when I was flashing ESC's
6:43 hmm,,,i just have three
Hi All !
Don't you like it when there is no audio (or loud trash electro music) and you have to guess what the person is doing .. and why?
Mr. Dabrudda, you video was useless to me !! Too bad !
I'll be sure to have to annoying open source music playing in the background, my kids screaming, my dog barking, my smoke alarm chirping and the sound levels really really low next video.
I'm glad you took this comment constructively. This is the right attitude to adopt.
Oh! I forgot. Make the video 340p .. and speed it up about 4 to 8 times!
@@oncledan282 Sarcasm on the obvious issues other videos are mysteriously given praise for. Add this valuable style. Make sure to drink a lot of coffee so you have the camera shakes or slap the camera every 5 seconds to get that authentic DIY perspective.
lost of time, just say what to do!
Thank you very much! It worked! My arduino is now alive
Thank you!