I'm a beginner in Xplane 12, and you explained in this video that you won't be able to fly this flight plan in the future! Is this why I can't fly a flight I see on youtube and set up on the G1000? I can't set some approaches exactly like in the video!
Hi there, there may have been some confusion. The route could change due to the real airport in the real world changing or updating the departure or arrival procedures, but that means that the FMS might show you an updated procedure with a very similar name but a higher number, so for example the SID would be LEGL2V, instead of the LEGL1V now. But you would just select that. I'm not sure what you meant by the G1000, this airplane doesn't use the G1000 GPS. Are you sue you are using the correct aircraft? Free E-Jets by X-Crafts v3.0 for X-Plane 12?
@@xcrafts_development I received your email today with the X-Plane 12_ Free Embraer E-Jets by X-Crafts v3.0.0 and installed them this afternoon! Flying with it has not been possible yet! I also just bought the Honeycomb Bravo Throttle Quadrant yesterday, but I haven't fully set it up yet! The G1000 is the Cessna Skyhawk (G1000) from X plane 12 where I didn't find some procedures. Thanks for explaining why the SID gets a higher number with an update.
Is it possible top load a planned c/o route in the fms by entering the dep/arr airportes in the free version?.. like EDDF-EDDM? in the standard planes of xplane it loads the data .fms from the xplane 12 folder thx for any information :)
I'm not familiar with that, however the FMS is exactly the same one as you would find in the default 737, so if that FMS can do it, the one in these Free E-Jets can do it as well :)
@@xcrafts_development Ok.. i will check it later and response here. when it works "we" can do it like in LNM or other Flight Planing systems. Stay tuned ;)
@@xcrafts_development My request testet and works nice with Flightplans from LNM like i use for all of my planes. Editing and updating data in the FMS works.. so i can try and do a testflight later :)
Is this in the free E-Jets? If you follow exactly every step like in the video you should see LNAV. Ard you usong the latest version V3.0 for X-Plane 12?
VNAV is already in our E-Jets :) FMS Speed is being beta tested right now and it is almost ready, but our next version v1.1.0 is huge and there are many other features that need to be tested and the main reason for it not being released immediately is that it's my wedding in 2 weeks, and we're going on a honeymoon so we won't be able to test as much during that time.
I purchased the complete family 3-4 month ago, absolutely love them! But I would love them more with FMS speed 😉 Can’t wait for the big update! Keep up your great work 🙏
Amazing, thank you very much. Ready to test the E-Jets
Carrot was on the far left of the speed management guidles screen you showed, it was kind of on-top of the terminal building :)
I'm a beginner in Xplane 12, and you explained in this video that you won't be able to fly this flight plan in the future!
Is this why I can't fly a flight I see on youtube and set up on the G1000?
I can't set some approaches exactly like in the video!
Hi there, there may have been some confusion. The route could change due to the real airport in the real world changing or updating the departure or arrival procedures, but that means that the FMS might show you an updated procedure with a very similar name but a higher number, so for example the SID would be LEGL2V, instead of the LEGL1V now. But you would just select that.
I'm not sure what you meant by the G1000, this airplane doesn't use the G1000 GPS. Are you sue you are using the correct aircraft? Free E-Jets by X-Crafts v3.0 for X-Plane 12?
@@xcrafts_development I received your email today with the X-Plane 12_ Free Embraer E-Jets by X-Crafts v3.0.0 and installed them this afternoon!
Flying with it has not been possible yet!
I also just bought the Honeycomb Bravo Throttle Quadrant yesterday, but I haven't fully set it up yet!
The G1000 is the Cessna Skyhawk (G1000) from X plane 12 where I didn't find some procedures.
Thanks for explaining why the SID gets a higher number with an update.
Hey Marko! Loving the updated XP12 E-Jets. When is the giveaway?
I will be selecting the winners today!
is the fps on freeware ejets and payware ejets was the same on xp11?
"Direct to" Does not work on the ERJ195 X plane 11 version.
my autopilot doesn't turn on the route why?
Is it possible top load a planned c/o route in the fms by entering the dep/arr airportes in the free version?.. like EDDF-EDDM? in the standard planes of xplane it loads the data .fms from the xplane 12 folder
thx for any information :)
I'm not familiar with that, however the FMS is exactly the same one as you would find in the default 737, so if that FMS can do it, the one in these Free E-Jets can do it as well :)
@@xcrafts_development Ok.. i will check it later and response here. when it works "we" can do it like in LNM or other Flight Planing systems. Stay tuned ;)
@@xcrafts_development My request testet and works nice with Flightplans from LNM like i use for all of my planes. Editing and updating data in the FMS works.. so i can try and do a testflight later :)
In the e jet 175 doesnt show LNAV when i press NAV i did all the process and still doesnt show can somebody help me?
Is this in the free E-Jets? If you follow exactly every step like in the video you should see LNAV. Ard you usong the latest version V3.0 for X-Plane 12?
@@MarkoMamula yes, I press nav but the aircraft dont follow the Flight plane, like 3 minutes later AP dissconects, but I need to check the version.
question my menu doesnt work on xp12
Ohhh you killed me when u said vnav and fms speed will be in a few months… 😭😭😭
VNAV is already in our E-Jets :) FMS Speed is being beta tested right now and it is almost ready, but our next version v1.1.0 is huge and there are many other features that need to be tested and the main reason for it not being released immediately is that it's my wedding in 2 weeks, and we're going on a honeymoon so we won't be able to test as much during that time.
@@xcrafts_development Congratulations!
Besides that, DON'T CRY ! It is FREE !
I purchased the complete family 3-4 month ago, absolutely love them! But I would love them more with FMS speed 😉
Can’t wait for the big update! Keep up your great work 🙏