Santisima Trinidad - part 16 Sanding Down The Keel
HTML-код
- Опубликовано: 12 авг 2019
- The keel is complete and in this video i am doing a lot of sanding. You can watch here the procedure and the transformation of the keel and at the end the model to a beautiful piece of work! This Video comes in 1080p.
Check out my personal recommendations from Modelers Central :
Check out my personal recommendations from Modelers Central :
For Beginners
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Advanced
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Expert
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Tools
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
As an Amazon Associate I earn from qualifying purchases. Affiliate links for tools :
Step Looper Pliers Create Eye Pins amzn.to/3KQyCCk
Big cutter amzn.to/3wzuyiF
Scalpel with tips amzn.to/3PwTlvb
Wire cutter amzn.to/3LzsXxu
Cyanoacrylic glue with tips amzn.to/3PwV83t
Hand drill with tips amzn.to/3agcoK7
Power drill amzn.to/3PszsFw
Drill tips from Cobalt amzn.to/3MF1oEy
Sandpaper 60 degrees amzn.to/39DA0bg
Small Saw amzn.to/3NpZRSD
Soldering iron amzn.to/3lu6jMj
Small bowl amzn.to/3NoJSEk
Wood putty pine amzn.to/3MDrGH3
Colored paints set amzn.to/3LyLha7
Wood sealer amzn.to/3lybGdI
Nitro thinner amzn.to/3yMX7e5
Paint thinner amzn.to/3ag57dl
Gloss varnish for yachts amzn.to/3wy62hK
Pins amzn.to/3G3Yt5K
Springs set amzn.to/3NxPJHH
Pencils amzn.to/3wvkqrc
Small flat screwdriver amzn.to/3yPPkfr
Flat Pliers amzn.to/38I6q47
Small hammer amzn.to/3sNLsrF
Needle threaders amzn.to/3yVTaUx
Diamond files set amzn.to/3Luy029
Protection gloves amzn.to/3agcGAH
Ruler amzn.to/3sP5kKU
Blower amzn.to/3LxQ8Ir
Dremel pack amzn.to/3sNzFts
Cleaning brushes amzn.to/3NjfKu6
Paint brushes amzn.to/3wCWotf 
Развлечения
John, it looks great. Congratulations. Please keep the videos coming. I love them.
Thank you very much Bob!!!
Another excellent video John thanks.from a wet night in England 😂👍🐕🐕
Thank you very much George!!!
Good morning John. Fantastic job, Nice going!!!😊 Super!!!
Thank you very much Thanasi!!!
Remarquable résultat ,je suis fasciné ...A+
Thank you very much Robert!!!
Hi John. I'm following your build with great interest. Great job so far ! Your hull came out perfect ! One suggestion, if I may, on the putty application. Instead of a general spread of the putty over each gap, how about using masking tape to tape off only the areas to be filled ? (In other words, tape off the areas just above and below the gaps) I realize this is more labor intensive in it's application, but it will save you a lot of sanding in the long run if there is only a thin line of putty resulting in less material to sand off for each gap. The putty application you used in no way takes away from the final result. Like I said, it came out perfect.
Thank you very much for your kind words!!! It's a nice suggestion, but i already have used putty and sand it down. In large areas what you are suggesting is very useful. In very small gaps the time of sanding is seconds so there the masking tape will have no use. I will try it but in another model because in this one the large areas of putty using are done. Thank you again! :)
Thanks John
Great job so far, if I may make a suggestion for the next time you have to fill in gaps use the saw dust from sanding and mix it with some wood glue and that way you will match the color of the wood and would not have to mix the 2 different puddles together and hope the color matches. That is what I do to fill in the gaps.
Thank you for the tip, if i may ask, with this way (the glue with the saw dust), are you able to use sand paper without having rough surface?
@@JohnsWoodenShips you have the rough surface at first but after sanding you will be hard press to find where you used it at, that is because of the color of the sawdust which will match the color of the wood around the gap.
I've done this for all the wooden boats I have made over the years.. now if you are putting a second layer of planking on do with the sawdust and glue then because we both know that the first layer does not really matter as much for looks. You can always try it out on a mock up first to see the difference between the two of them. Good luck and keep up the good work
@@4englishlies875 Thank you again for the tip!!!
Thank you so much for these videos John. I was wandering why you can’t glue the next planks until the white glue is dry. Because next plank gets glued separately and doesn’t touch white glue. Also I check everyday for a new Montanes video. Thanks again!
Thank you very much John!!! Sometimes the next plank is in a different depth (as you go down) so the point of glue at the arches may have white glue from the above plank. This means that the cyanoacrylic glue will mix with the white glue and it will not work like it supposed. Then you might get a plank that will pop out a few millimeters and you have to unglue it ,clean the area and do it again, that is a pain in the ... you know what i mean. So it is not recommended to place more than 3 or 4 wood strips (according the part of the keel) at the same time.
Hi!
Where to buy that putty?
I have bought it from the local hardware store.