About time bro, been watching this series for well over a year and proud to see the project is done (well the part where the car runs atleast), can’t wait to see cosmetic upgrades on it 😂
Amazin video like always. Regarding the random shut-off it can be the due to the way speeduinoi connects to tuner studio. If it detects a offline online cycle it will restart the arduino and you will have that random shut-off and then power on. Its almost always cause of a faulty connection on your laptop. Check if it does the same with the laptop disconnected, if it's that there is a fix soldering some resistances to a terminal in the speeduino to keep it from reseting at each new connection.
Thanks man, appreciate the advice, I did hear about that, but it happens even when the laptop isn't connected. I think it has to do with VE values and timing when the fan, headlights, etc, put load on the engine and rpms drop, probably needs some adjustments to stop it from bogging down and stalling.
@the_mintiest_micra maybe the load from the lights and fan ask too much and the rpm drops below the idling and so it stalls? Mine bogs down arround 200rpm when everything turns on, a higher idle could be a temporary fix? I know there is a input for when the AC is on to turn the idle up so it corrects itself, maybe use that when the lights and fan turn on?
@the_mintiest_micra Random thing that happened to me with a DET3 piggyback is that with electrical load the RPM drops a bit until the IACV can fix it. But during the dip the amplitude of the crank signal appeared to be below the threshold of what the DET3s input can see, so it would read no signal. Perhaps the speeduino has a minimum input value it can read.
Ok. Just thought it would help with the lowering issue you had with the Corsa b coilovers being too low. Probably end up being cheaper in the long run.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
9 liters per 100 kms with bigger injectors a turbo and a not optimized tune doesnt sound to bad. Car sounds cool (:
True, but the injectors have been mapped correctly and even running 15AFR at cruise with a good bit of spark advance.🤷♂️
Yesss i followed this series from beginning!!
About time bro, been watching this series for well over a year and proud to see the project is done (well the part where the car runs atleast), can’t wait to see cosmetic upgrades on it 😂
Shut up la
What a loser
Haha, thank you, thanks for sticking along.👍
Great mate... keep up the great work.... really enjoyed the vid👍👍
Thank you, I'm happy to hear that. More to come very soon!
Class to see!
well done, car sounds sick.
Class mate you’ll definitely do well👌🏼👌🏼
Sick man been following the series all along can’t wait for the next vid 💥💥
Thanks mate, appreciate the support.
Brilliant.
Love to see it, video was so funny too. Great craic
Happy to hear, thank you.👍
Class seeing it done after watching videos of it getting built on TikTok and here
It's definitely been a long journey, and much more to come soon, thanks for sticking along.👍
Amazin video like always. Regarding the random shut-off it can be the due to the way speeduinoi connects to tuner studio. If it detects a offline online cycle it will restart the arduino and you will have that random shut-off and then power on. Its almost always cause of a faulty connection on your laptop. Check if it does the same with the laptop disconnected, if it's that there is a fix soldering some resistances to a terminal in the speeduino to keep it from reseting at each new connection.
Thanks man, appreciate the advice, I did hear about that, but it happens even when the laptop isn't connected. I think it has to do with VE values and timing when the fan, headlights, etc, put load on the engine and rpms drop, probably needs some adjustments to stop it from bogging down and stalling.
@the_mintiest_micra maybe the load from the lights and fan ask too much and the rpm drops below the idling and so it stalls? Mine bogs down arround 200rpm when everything turns on, a higher idle could be a temporary fix? I know there is a input for when the AC is on to turn the idle up so it corrects itself, maybe use that when the lights and fan turn on?
@the_mintiest_micra Random thing that happened to me with a DET3 piggyback is that with electrical load the RPM drops a bit until the IACV can fix it. But during the dip the amplitude of the crank signal appeared to be below the threshold of what the DET3s input can see, so it would read no signal. Perhaps the speeduino has a minimum input value it can read.
cool little thing
my want for a micra has increased
FINALLY…..!!!
Cold
What a good boy
The best boy.
Congratulations on the build.
Didn't you also got a drivers license since the last video?
I did get my licence, yes. Back in August 2024 actually, been waiting since then to drive it.🤣
Fully paint match?
Not for a while, might wrap it in the future.
Micra rulez
Upgrade your alternator resistor
Good boy
how did you did you do the bleu LED's in your dash?
Actually just changed the bulbs for white LEDs and came out looking a bit blue, though.🤷♂️
Bigger inyectors. Nice video
Already have upgraded them from 149cc to 216cc.
@the_mintiest_micra i like it, maybe the ecu tunin.
To the donegal rally with ya lad
Haha, definitely one day.🤣
Deadly haha
Hello, i have Skoda Superb 1.9Tdi BXE i was wondering how i could also get that live view of ECU though obd2 ?
I'm not sure, as the software that I'm using, Tunerstudio, works with my standalone ECU, and I'm not sure if it does with stock ECUs.
@the_mintiest_micra Thanks, i'll look into it.
Fuck yes this is sick
Did you manage to get NCT on it and all?
Took it for a test and only failed on emissions. It should be fixed now, and I will take it back soon.
What steering wheel is that?
OMP 300mm Tracento, polyurethane (fake leather look)
what rims is this?
Bellini RS BR wheels, 16 inch, running 195/45 tyres, not sure about other dimensions.
Inshallah paint and wheels
Will probably wrap it down the line. For now, I'll just enjoy driving it as it is for a while🤣
Downsize the wheels.
Let him do what he wants.
I agree they're a bit big, but will probably just leave them on like this for a while.
Ok. Just thought it would help with the lowering issue you had with the Corsa b coilovers being too low. Probably end up being cheaper in the long run.
I think you should build a hover craft for your next project considering all the poxy rain we get here 😂