So awesome I've been waiting for this video and hearing about the upcoming parts. I've had my N line for just over a year and can't wait to get some nice mods rolling. Thank you for this video and keeping us updated.
So...the coupler to the turbo inlet solidifies my decision to NOT enrich someone who engineers a product that is only cosmetic. You can put a 10 inch inlet on...but if its choked down to a 1.5 inch inlet to the turbo....what's the sense?
The hard intake tube would increase intake sound compared to the soft stock one. Its seemingly designed for appearance and sound, two key measures the majority of their customers would be buying for.
My dealership hasn't voided my warranty. I think it comes down to your dealership and your relationship with your dealership. Some people has had problems when they went in for warranty work because they had a intake and some haven't
Yulp. I have a smaller and lighter pulley, turbo inlet and the force cold air induction in the front grille. Theirs videos of everything that’s been done. You can scroll through all my videos to find them.
Had my 2021 Sonata N Line for about 6 months. Thanks for the vid. I went to order today but out of stock. Have you dons exhaust upgrade> Thanks for the vid. Bodo in Australia
Thank you for your support. I haven't touched the exhaust yet. A company KSR has a downpipe and mid pipe, sxth Element has a mid pipe. But, I don't like KSR mufflers. So I'm waiting on Borla to finish their R&D cat back exhaust system for our car, then I will get their cat back system and order KSRs down pipe
@@natty1 reach out to some shops and see what they think. I believe we would have to wait till someone cracks our ECU before doing any major turbo mods. Sxth element can probably help and definitely Lap3, because I believe Lap 3 is suppose to have the ECU cracked by the end of this year beginning of next year. Right now we only can put the bolt onz that are out and the tunes that are out now
@@LeviL98241 They have seen it and the ones that haven't seen I showed it to them. Everyone at my dealership knows my car and I've still gotten warranty work done since they seen my intake. No check engine lights on the dash or problems. Plus this intake is a CPLT Certified by C.A.R.B and E.P.A.
Nice video! Just installed my intake today! Did you have any issues with clearance from the air box to the hood? I used the supplied grommets for the air box mounts and my hood came into contact with the air box. I had to remove the grommets and install with the stock mounting bolts. The air box was also sitting right against the wire looming running underneath. Did you have any of these issues?
Yes I did. I spoke to Sxth Element and they said they know of the issues and will have new brackets ready in a week or two. When they are ready they will send them out to anyone that's having that issue.
Waiting on my 2022 Sonata NLine mid June. Definitely want to get it over 300hp immediately. What do you recommend? I’m not a mechanic, just interested. Thanks in advance.
First of all, Thank you for checking out my channel. I got over 300hp at the crank with just an Carbon Fiber Intake and a water pump pulley. But, SxthElement.com will be your friend, sharkracing.com, Burgertuning.com and lap3.com also will be your friends in helping you to get over 300hp. Intake, bored Throttle Body, down pipe, intercooler, water pump pulley, exhaust and a piggy back Tune will help.
@@hardyboylifestyle yes I tried doing that after watching your video but it was hard to still get a secure feel I am going to reach out to their customer support
What a nice car bro. Nice video by way!! I have a Sonata N Line as well and I’m wondering if you can help me with the location of the PCV cuz I bought an oil catch can but I don’t know the location 🥲
It won't fit the 1.6t set, but maybe the 1.6t limited intake will fit your 1.6t set. Here's the link. I hope this helps. sharkracing.com/2020-sonata-1-6-turbo-intake-set/
Tyler here's the link for the intake sxthelement.com/k5-gt-sonata-n-line-cplt-carbon-intake/ also checkout www.sharkracing.com and www.burgertuning.com and www.lap3.com for any and all mods.
If you have Facebook message Mark Charles or email him at tech@sxthelement.com and tell him I sent you. Mark will take care of you. He has 3 in stock right now.
Nice vid bro, thanks for showing the installation. It’d be hard to capture with the camera mic but how does it sound while driving? I’m using the k&n drop in filter now and with it I can just hear a little bit of turbo noise that I didn’t hear before. Curious how loud this makes the turbo. I used to have a mazdaspeed3 with a short ram intake on it and the turbo was super loud, I liked it
The intake set up looks really nice specially with the carbon fiber pipe. Can you do a driving video to see how it sounds under load etc?? What's your take on this set up after you drove the car? You notice or feel any difference in sound and mainly performance over the factory air intake system? Can't wait to see this Sonata with a down pipe and a tune. I bet with those 2 mods the car should make roughly about 375 HP at least if not more.
@@mattsmith3001 I like the Hampton Grey. When I got my car they only had two in stock. A black and a Silver. I had a Black 1.6T Limited, so I was like no more black cars lol
@@hardyboylifestyle I understand that! I’ve had black cars in the past…look great when clean, but a pain to do so. Car looks great though man, subscribed!!
@@Just_Joshing024 I just spoke to a representative from Sxth Element. They have 3 units there right now. If you have Facebook, message Mark Charles or email him at tech@sxthelement.com and Tell him I sent you and he can take care of you.
I love watching dudes revving miles of wear off their car's engine for no good reason. "Listen!! No, No really, Listen!! See the cold air intake makes it sound um.....well just listen!! I'm going to close the hood now and make all of this moot." Ooooh but the carbon fiber looks cool, and BTW, it DOES look great. Ya'll do you every time and don't worry about fools like me just busting ba**s for fun. Great video. Cheers!
So awesome I've been waiting for this video and hearing about the upcoming parts. I've had my N line for just over a year and can't wait to get some nice mods rolling. Thank you for this video and keeping us updated.
The same company Sxth Element just came out with a mid pipe, KSR has a down pipe and mid pipe and Borla has a whole cat back system
Love how you went scared to rev it 💯 thanks bro
thanks lol
Is this without an aftermarket blow off valve???
Yes. I still have the stock BOV on
Came here to ask this! Are you getting all that turbo noise STRICTLY from the new filter? Thanks for the vid!
yeah all from the intake, I'm still running a stock BOV
So...the coupler to the turbo inlet solidifies my decision to NOT enrich someone who engineers a product that is only cosmetic. You can put a 10 inch inlet on...but if its choked down to a 1.5 inch inlet to the turbo....what's the sense?
The hard intake tube would increase intake sound compared to the soft stock one. Its seemingly designed for appearance and sound, two key measures the majority of their customers would be buying for.
maybe?
I would love one for my N/A 2.5 , looks so clean.
make your own
Thanks for the video helped out alot where I got stuck on some parts of the installation. Was a pain installing but well worth it
Glad it helped
Looking good bro! Thanks for showing the process
Thanks I appreciate it. I hope it helps even with some footage missing.
Can this work on my Hyundai sonata 2021 SE the base model 2.5 non turbo?
Yes it should work. Should be the same size outlet. If not Sxth intake, you can make your own if you follow my other video DIY
Does adding this intake void the warranty?
My dealership hasn't voided my warranty. I think it comes down to your dealership and your relationship with your dealership. Some people has had problems when they went in for warranty work because they had a intake and some haven't
I just bought my 2022 2 days ago and I need this in my life. Now they just need to come back in stock. 😭
Hopefully soon
Do u have any mods besides the intake and intake hose
Yulp. I have a smaller and lighter pulley, turbo inlet and the force cold air induction in the front grille. Theirs videos of everything that’s been done. You can scroll through all my videos to find them.
Had my 2021 Sonata N Line for about 6 months. Thanks for the vid. I went to order today but out of stock. Have you dons exhaust upgrade> Thanks for the vid. Bodo in Australia
Thank you for your support. I haven't touched the exhaust yet. A company KSR has a downpipe and mid pipe, sxth Element has a mid pipe. But, I don't like KSR mufflers. So I'm waiting on Borla to finish their R&D cat back exhaust system for our car, then I will get their cat back system and order KSRs down pipe
would this work on the NA 2.5 for the SEL?
Yes it can work on a N/A car
Good team!
Thanks
Did this install void the warranty?
The dealership has seen my intake, worked on my car since and they haven't said anything.
I have the sel plus 1.6t but I wanna add another turbo and make it about as good as the n line
Unfortunately they haven't broke the ECU yet, so you can't do any turbo upgrades or you will kill the motor
@@hardyboylifestyle can't I change it?
@@natty1 I wouldn't, because to change it you would have to tune the ECU and you can't tune the ECU
@@hardyboylifestyle damn.. what are my options? I found some reddit posts of people doing it without any problems but idk much about this stuff yet
@@natty1 reach out to some shops and see what they think. I believe we would have to wait till someone cracks our ECU before doing any major turbo mods. Sxth element can probably help and definitely Lap3, because I believe Lap 3 is suppose to have the ECU cracked by the end of this year beginning of next year. Right now we only can put the bolt onz that are out and the tunes that are out now
Any lights on the dash or anything?
No lights at all on my dash and it's running strong. My dealership has a seen it and has not void my warranty.
@@hardyboylifestyle they told you it doesn’t void the warranty?
@@LeviL98241 They have seen it and the ones that haven't seen I showed it to them. Everyone at my dealership knows my car and I've still gotten warranty work done since they seen my intake. No check engine lights on the dash or problems. Plus this intake is a CPLT Certified by C.A.R.B and E.P.A.
Damn you Rev the he'll out of it 😆 u can hear the turbo pretty good are you getting better throttle response?
I'm feeling a better response and now that I changed the water pump pulley for a lightweight smaller one. I noticed a big difference
Nice video! Just installed my intake today! Did you have any issues with clearance from the air box to the hood? I used the supplied grommets for the air box mounts and my hood came into contact with the air box. I had to remove the grommets and install with the stock mounting bolts. The air box was also sitting right against the wire looming running underneath. Did you have any of these issues?
Yes I did. I spoke to Sxth Element and they said they know of the issues and will have new brackets ready in a week or two. When they are ready they will send them out to anyone that's having that issue.
Waiting on my 2022 Sonata NLine mid June. Definitely want to get it over 300hp immediately. What do you recommend? I’m not a mechanic, just interested. Thanks in advance.
First of all, Thank you for checking out my channel. I got over 300hp at the crank with just an Carbon Fiber Intake and a water pump pulley. But, SxthElement.com will be your friend, sharkracing.com, Burgertuning.com and lap3.com also will be your friends in helping you to get over 300hp. Intake, bored Throttle Body, down pipe, intercooler, water pump pulley, exhaust and a piggy back Tune will help.
The connection from the stock intake isn’t secure at all even after applying the rubber part … Did you do anything to make it more secure later?
Are you talking about where the tube connects to the factory ram air?
Yes it’s still loose I feel like the connect lion isn’t secure at all and I feel like it’s so much back pressure after installing it
@@user-eo2rf3cl5q Mine is not as secure as I would like, but it hasn't moved. Did you install the rubber seal from the factory box onto the tube?
@@hardyboylifestyle yes I tried doing that after watching your video but it was hard to still get a secure feel I am going to reach out to their customer support
@@user-eo2rf3cl5q I talked to another guy, he used black tape to secure it. I guess everyone is having that issue
Appreciated
Ur inlet ducklet is not sucking air to the filter now just letting uno
Air going in mine. I had to clean it the other day from leaves and dirt getting sucked in
Muy bonito tu carro y los upgrade que le has hecho están super bien .. Saludos desde 🇵🇷P FKN R
Gracias y a medida que salgan mas partes hare mas videos
It's 2022 and here we are with a 360p quality video, cmon man!
🤷♂️
Do u know if this intake would fit a 2021 Hyundai Elantra nline?
2021 Elantra N Line ?
looks good Bro!
What mm wrench you use
10mm and a 12mm If I remember correctly
What a nice car bro. Nice video by way!! I have a Sonata N Line as well and I’m wondering if you can help me with the location of the PCV cuz I bought an oil catch can but I don’t know the location 🥲
Do you have Instagram?
Watch the video again and fast forward to 18:14 and I believe that's the Factory oil catch can my brother was pointing to.
Looks awesome man
Hey man do you know if this one would fit my 2020 1.6t Sonata SEL Plus?
It won't fit the 1.6t set, but maybe the 1.6t limited intake will fit your 1.6t set. Here's the link. I hope this helps. sharkracing.com/2020-sonata-1-6-turbo-intake-set/
Got a link? I just got my 2021 n line a couple months ago and I’m looking to upgrade
Tyler here's the link for the intake sxthelement.com/k5-gt-sonata-n-line-cplt-carbon-intake/ also checkout www.sharkracing.com and www.burgertuning.com and www.lap3.com for any and all mods.
If you have Facebook message Mark Charles or email him at tech@sxthelement.com and tell him I sent you. Mark will take care of you. He has 3 in stock right now.
Nice vid bro, thanks for showing the installation. It’d be hard to capture with the camera mic but how does it sound while driving? I’m using the k&n drop in filter now and with it I can just hear a little bit of turbo noise that I didn’t hear before. Curious how loud this makes the turbo. I used to have a mazdaspeed3 with a short ram intake on it and the turbo was super loud, I liked it
Also wondering if adding this intake messes with Hyundais warranty 🤔 any knowledge you may have would be appreciate. TY!!
The sound of the BOV is louder like with the K&N open filter. A little more HP on the mid to high range
@@JustinLHH My dealership seen it and I don't have any problems. It might depend on the dealership.
The intake set up looks really nice specially with the carbon fiber pipe.
Can you do a driving video to see how it sounds under load etc??
What's your take on this set up after you drove the car?
You notice or feel any difference in sound and mainly performance over the factory air intake system?
Can't wait to see this Sonata with a down pipe and a tune. I bet with those 2 mods the car should make roughly about 375 HP at least if not more.
I will try to get a drive with sound. I like the setup. It looks clean and kinda of stockish. Definitely will look good when the hood is up.
Nice good stuff man. Is there a noticeable feel in power or throttle response anything?
@@hardyboylifestyle does it increase any horsepower or is it for more of sound and noise?
@@Boosted00 On the mid to high range I can notice a difference
Any noticeable horsepower increase?
It seems a little on the mid to high range and the BOV sounds better from stock
@@hardyboylifestyle good deal, I’m picking up my 21 N line tomorrow in Hampton grey! Pretty excited!
@@mattsmith3001 I like the Hampton Grey. When I got my car they only had two in stock. A black and a Silver. I had a Black 1.6T Limited, so I was like no more black cars lol
@@hardyboylifestyle I understand that! I’ve had black cars in the past…look great when clean, but a pain to do so. Car looks great though man, subscribed!!
I'm disappointed we didn't get to hear some driving footage after the install instead of just beating the tits off the rev limiter in park.
😂 Sorry I don't have a mic that would mount on the outside of the car. I will try to get something soon for you
@@hardyboylifestyle or inside so the wind noise doesn't drown out the intake noise. I'm assuming there's more compressor noise than stock?
They never restock
I would reach out to them and see when they will have more in stock. They must keep selling out
🤘🏾🤘🏾My Guy!!
👏👏👌🏽
Too bad they've been out of stock for months
wow They are still out of stock? That's crazy
@@hardyboylifestyle I want it soooo bad!!
@@Just_Joshing024 I just spoke to a representative from Sxth Element. They have 3 units there right now. If you have Facebook, message Mark Charles or email him at tech@sxthelement.com and Tell him I sent you and he can take care of you.
@@hardyboylifestyle is this contact info still good? Desperately searching for this on my 2022 Hyundai Santa Cruz with the same engine. Help please!🙏🙏
I love watching dudes revving miles of wear off their car's engine for no good reason. "Listen!! No, No really, Listen!! See the cold air intake makes it sound um.....well just listen!! I'm going to close the hood now and make all of this moot." Ooooh but the carbon fiber looks cool, and BTW, it DOES look great. Ya'll do you every time and don't worry about fools like me just busting ba**s for fun. Great video. Cheers!
😉