How to remove ash deposits in diesel-particle filter systems with MOTIP DPF Cleaner?
HTML-код
- Опубликовано: 16 окт 2024
- Remove ash deposits in diesel-particle filter systems without disassembly with MOTIP DPF Cleaner. DPF Cleaner is fast-acting and is non-corrosive. MOTIP DPF Cleaner is free from solvents and non-flammable.
Product details:
www.motip.com/...
Usage instructions:
BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY.
(For professional use only)
1. The aerosol should have room temperature
2. Best processing temperature 10 to 25°C.
3. Before use, shake the aerosol.
4. Before use, allow the engine to cool down (maximum 50°C). Observe the instructions of the car manufacturer.
5. Disassemble temperature or pressure sensor from the filter. Insert the special tube into the opening. Empty the can in the following intervals: spray 3 - 5 times; allow to soak for 5 seconds
6. Install temperature or pressure sensor. Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid. Make a test-drive of 30 minutes. This may cause the formation of steam.
Done this twice over 5 years on a Bmw 525D 3.0L. I can confirm that the dpf message dissapears.
I did the 5 seconds sprays inbetween from a hose directly down to the filter, idled at 15 minutes and drove a little harder than usual in both high and low gears for heavy pressure for about 30 minutes.
I always buy 2 bottles just in case.
did you see any smoke coming from behind while you were revving high?
@@xiaomitelephone845 No, only a little bit some minutes in the start.
Honestly a simpler way: I tried 2 fuel tanks with "904 diesel particulate filter cleaner" fluid and drove almost 20 hours one day to sweden and back to norway, one year since last time and haven't gotten any messages.
What sensor you removed and sprayed to dpf?
Thank you for the video it was simple, informative and very helpful.
I have been searching RUclips videos for almost 2 days on where to insert the tube or what the sensor looks like.
I really think this video will/can help alot of people if it was higher on the search, for example calling it how to use dpf cleaner etc then the brand name 👍 Thank you I now feel confident enough to use the product before having to pay hundreds of pounds to a mechanic.
We're glad to hear that you feel confident to use the DPF cleaner and that the video is helpful and informative. Thank you for the feedback. We will change the title for better search results. We hope you have better luck searching next time.
Excellent discovery this product is the cheapest solution available.Bought 2 motip spray and lambada key on ebay.Changed oik and oil filter.Sprayed motip dpf in oxygen sensor , left engine running idle for 15mins and went on motorway driving 70 miles an hour in 5th gear. On the way back my SUV on the hill was as powerful as F35.
It really works...Škoda Octavia 2 RS - 75 DPF and now all lights gone and car normal drive 👍
Still ok after 3 months? Greets from the Netherlands 👋
still fine after 8 months?
@@flex_gore8537 And still good as of today 1 year later?
Ahoj osvědčil se ti ten spray dlouhodobě? Klesl po použití diferenčni tlak?
Just applied it on a 9 year old Audi Q3 2.0TDI.
It regained a big amount of power. Very noticeable.
Have to see if it gets past emissions again
How does this remove ash without an acid?
Mr muscolo best cleaner
Didnt do a thing to my dpf in fact it caused the ash level to rise a but more.
Can I spray directly to dpf? From opening on exhaust?
It worked for me on jaguar xe 2015.
For a 2011 Mercedes w204 220CDI where will I put the cleaning spray? On the probe or in the pressure sensor tubing (wide or thin tube). Thank you
Motip is top!
hello
do you have to ride in the pandent towers try on the road
or a simple 30-minute drive is enough
Thank you for your reply
Sorry for the late reply. Thank you for your question. The particulate filter is regenerated during driving, the way you drive (pandent towers) has no influence on it.
hvad koster et rens af et partikelfilter som er stoppet?
i usd this and has helped some cars but not all, mainly due to the percentage of blockage of the filter
Is it better to use 2 cans of spray?
i think the best remedy is time, to let it absorve or something. You can check other videos in order to see other cleaning solutions (some guy is trying out different cleaning solutions) @@frv6610
I have an VW Passat 2012 Diesel 1.6 variant, it have very poor engine power, and the DPF lamp is flashing. Ive tried to poor some DPF cleansing inn the tank, this didn't work, now im gonna try this method....i hope this will hjelp, if not it's gonna be very expensive to fix.
im spraying today in few hours,mines full, wont regenerate itself , soot full light on as soon as i give it a little bit more throttle. will see how effective it is. i got dpf underneath and sensor easy accessible luckily.
@@joestiffcock2480 How did it work out?
@@dextiir didnt do well. dpf too clogged. removed it completely last year now its fine. no sensor issues just badly clogged filter at the time.
How did it work out for you Ståle?
@@dextiir it did not work for me, ive sold the car and got myself a new car now
Hello motip, how many DPF cleaner is safe to use at cleaning time?
only 1. It's half a liter, it should be enough.
Can the DPF spray work also without forced regeneration and without changeing with Lexia3/diagbox any codes?
The DPF spray works as shown in the video. Please if thing are unclear contact us: www.motip.com/en-en/contact
@@MOTIP_eu Update: Thank you. I injected 2 cans of fluid through oxygen sensor's opening and now it is out of limp mode (also risk of dpf clogging-fault is solved) but it didn't stop Service mode which is caused by ash in the filter. There was no need for forced regeneration with computer. Edit 9 months later: The Service Mode was caused by a not working engine radiator fan, the DPF filter is ok.
5. Disassemble temperature or pressure sensor from the filter. should say Before the dpf. as there is temp/pressure sensors each end
I tried this stuff and it don’t work, my ash residue was 67.89 and now it’s 68 so it does not reduce or clean ash residue as advertised. I bought 2 cans still have 1 left might make a video showing it does nothing to remove or reduce ash residue and will wait to see what motip has to say
The ash and soot content are calculated not measured.
The differential pressure and the frequency of subsequent regens would tell a better story.
does this remove ash or soot?
It states that it can remove ash but it doesn't.
Soot. I doubt it removes ash. People get confused all the time.
Hi, thought to try this. I have pre-CAT, CAT and DPF. EGT sensor 1 between pre-CAT and CAT , EGT sensor 2 between CAT and DPF. where to spray ? thanks.
Hi there, Disassemble the temperature or pressure sensor from the filter. There you should insert the special tube into the opening. If you’re not sure, please ask you car manufacturer. www.motip.com/upload/motip_upload/lijnpdf/TI/EN/WEBL1340.pdf
@@MOTIP_eu pdf page is not found
This will not clear ash from the DPF.
Surely it will clear some of the ash though with the liquid flushing through the exhaust not as good as removing it to fully flush out the ash of course but a cheaper/easier option before going to those lengths better than just doing a forced regen and often a car will be so blocked it wont do forced regen so this would clean it out enough to do another regen
Ash can't pass through the ceramic walls of a dpf filter, only gas from regen. The holes/tubes/channels in a dpf don't go through the filter, just into it and are closed at the end. Same at the exit end, Regen of Burnt off soot trapped in the dpf cross through the ceramic substrate from inlet tubes to outlet as gases, but ash remains in inlet, and can only be removed by reverse back pressure through a removed dpf filter afaik. Ash takes about 150,000 miles to affect the dpf, then either replace dpf or major remove and clean. Fluid into the dpf to remove diesel soot don't change ash, and wetting ash may make it cement like and impossible to remove further on. Ultrasound is used also to loosen and remove ash inside the filter afaik.
Sure. It has to be taken off car, both sides filled with cleaner and after few hours rinse with water. On both sides there is a man on ytb that cleans dpf with many agents and best ash dissolvent was 3% HCL.
Most definitely does
The mecanic wants to replace my whole system, says im over 80 percent blockage, can i still clean it myself?
This will only clean soot and not ash.
Can you leave engine on while exhast is off underneath for direct effect?
no, it's a bad idea.
How I can know that product has decreased ash level and how much has it decreased? I used the product on 2.0tdi (CRBC) which had no warnning or error lights but it has 70% full dpf of ash. As far as I got ash level is just calculated by number of regenerations.
Check your DPF Differential Pressure that will tell you if it has cleared
this is counted in airflow? what is the measure system and the exact name, i am trying to find out an OBD II adaptor that supports that on my Toyota...
Thanks
@@shueibdahir
Does this stuff remove the ash?
Yes, our DPF Cleaner is a tool to loosen and remove ash deposits in diesel-particle filter systems. Of course the seriousness of the ash deposits plays a part in the end result.
This stuff doesnt work.
How you clean catalitic convertor?
Can I use this Motip dpf cleaner for cleaning catalitic converter on diesel engine?
I read somewhere that yes you can do it by injecting through the oxygen sensor-hole. The fluid passes first through catalytic converter before it reaches the DPF.
Not working
Some steam 😂
not works at all
It does not work if you do not read the repair manual. 😂
🤣
Clark Mary Garcia Karen Taylor Jose
Rodriguez Frank White Kenneth Lee Edward
Snake oil, donot use.
Thomas Matthew Perez Dorothy Rodriguez Steven
Brown Sarah Wilson Jessica Robinson John
Not good, zero impact.
Anyone ever tested this?
Sounds too easy and too cheap to be even close to being effective.
Hi I tested it today. It did the magic. All lights gone.
Let me know in case you need more information!
@@bilal390 have you had any problems since?
@@bilal390 did it real help you.thank you
@@flex_gore8537 just got it back after an year. Will do the same thing again