Headlight assembly removal on a Kia optima.

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024
  • A quick video to show you how to remove the headlight assembly on your kia optima. Mine is a 2012 so this may very a bit from different year models. Also it's how you can remove the bumper

Комментарии • 64

  • @RockyMtnWay_406
    @RockyMtnWay_406 9 месяцев назад +3

    Gonna dive into this tomorrow on my daughter's car. This seemed to be one of the better vids I found.

  • @iwantivette
    @iwantivette 3 года назад +7

    I just want to say thank you from the bottom of my heart, i have been trying to find a way to replace lights on my optima, and this has been the best video!!!!

  • @arthurnieto7050
    @arthurnieto7050 11 месяцев назад +2

    Great job, like the video. At 3:15 you mentioned about the three brackets the head light to remove by pushing from the inside the bumper and not to pull, I found that you can disconnect the bracket that hold the three tabs by removing the two no. 10 nuts and removing the one no. 10 bolt. And it will pull away without worrying of breaking the tabs.

  • @a38yolady62
    @a38yolady62 3 года назад +1

    Thank you for myself as well. I searched and searched and couldn't find what you just did. Saved me so much more aggrevation. Everyone says... Just call me if you need help with car. Then, they all suck by not following thru. Lol so, I got this, because of people like yourself on RUclips.

  • @zachariahgeiger2033
    @zachariahgeiger2033 2 года назад +3

    Great video. I was able to swap my lights out in about hour thanks to your tips! Much appreciated.

  • @deputychief441
    @deputychief441 5 лет назад +11

    Great the only one I found about this. Thanks!

  • @earlh936
    @earlh936 8 месяцев назад +1

    Thanks, you made my Saturday a lot easier 👍🏻

  • @ihelpsed8em
    @ihelpsed8em 5 лет назад +3

    Thank You for this. I also have a hybrid and am tired of breaking my knuckles and catching the bold from all the cuts. Appreciate it.

  • @Fairdinkumamerican
    @Fairdinkumamerican 5 лет назад +3

    Thanks man. Was able to replace the HL assembly in under an hour.

  • @krw2932
    @krw2932 5 лет назад +4

    Thanks for the vid.l am having issues with my HID lights and apparently it’s the reflective coating...common issues w Kia Optima
    .This keeps me from have to go to the dealer🙂.

  • @annabellechika
    @annabellechika 4 года назад +2

    Thank you for posting this video! It was very helpful!

  • @kalyndetjen1728
    @kalyndetjen1728 3 месяца назад +1

    You know what I think I’m good with my stock headlights 😂

  • @Diosesdepapel
    @Diosesdepapel 5 лет назад +1

    Great video , why they have to make everything So complicated , Lot of work to replace the HL Thank You for sharing ..

  • @myya8370
    @myya8370 3 года назад +1

    I really appreciate the instructions! 🙌

  • @carlarmbruster
    @carlarmbruster 3 года назад +2

    Thanks, this video helped. What a pain in the butt that was though!

  • @alisafaoui6773
    @alisafaoui6773 4 года назад +1

    Your video was a great help. Thanks

  • @GenXisT
    @GenXisT 5 лет назад +5

    good lord. what a massive PITA! thanks for the video.

  • @rayberczik7251
    @rayberczik7251 2 года назад +1

    Great video, helped a bunch!!

  • @joergmeyer3796
    @joergmeyer3796 5 лет назад +3

    Great video! Thanks for the warning about prying the bumper off carefully. No plastic parts broke! :-)

  • @TheRealK2F
    @TheRealK2F 5 лет назад

    Every sound made me cringe but thank you i fell asleep driving so not only do i need a new headlight. I also have too replace my bumper so you saved me time

    • @ipp2109
      @ipp2109  5 лет назад

      Glad the video could help, sorry to hear that happened though

  • @jbroheretoday
    @jbroheretoday 5 лет назад +2

    Thank you for posting the nice video.

  • @ToxicSocietyTroll
    @ToxicSocietyTroll 6 месяцев назад +2

    car designers prob have never spent any time actually working on a vehicle

  • @bernee6969
    @bernee6969 Год назад

    Great video, but my question is how did you run that big wire , or which way did you? Under the car or through the firewall?? Do you have video or pictures,, im installing a audio system in mine is reason im asking

  • @budkunshier2802
    @budkunshier2802 3 года назад +1

    Thank You for sharing

  • @Ecountry
    @Ecountry 4 года назад +1

    Thanks for video

  • @dan8221
    @dan8221 6 месяцев назад

    Having trouble taking off the headlight cover from the driver's side without having to remove the whole bumper n what not. Any tips?

  • @djvtec26
    @djvtec26 7 месяцев назад

    Every single video on this car is the passenger side replacement, I'm assuming the driver side is the same concept?

    • @ipp2109
      @ipp2109  7 месяцев назад

      Yup, the exact same, just flipped

  • @yellow7233
    @yellow7233 5 лет назад +1

    Thanks!!!

  • @user-rf6pq7pv9m
    @user-rf6pq7pv9m 5 лет назад

    روح ي مبدع ❤️

  • @lameyste
    @lameyste 6 лет назад +1

    Good one!

  • @doohizzle88
    @doohizzle88 Год назад

    Do you have any suggestions on where to buy a new headlight assembly from?

    • @ipp2109
      @ipp2109  Год назад

      I would call kia and get the part number than Google it. A lot of times, other dealers or part wearhouses will be selling OEM for much cheaper

    • @kadylov3
      @kadylov3 11 месяцев назад

      eBay

  • @Tylaaskyee
    @Tylaaskyee 4 года назад

    Serious question,
    I recently busted my headlight . I bought a used one online but I believe its for a 2013or2014 not my 2015.
    From what I can tell the lights are identical , BUT the female end of the plug doesn’t match the male end.
    Is Cutting , splicing the wires and switching plug ins an option ?
    As of now I’m kinda screwed with having no light in general due to damage.. any advice helps!

    • @stefanb.5154
      @stefanb.5154 4 года назад

      It’s most likely for a 2013 as the 2014 is the refreshed year and 2015 is a carryover. The plug ends are different because of some minor changes in the wiring for the upper end models. There’s ways to rewire it. I’d suggest googling it and researching forums

  • @brianpeters8917
    @brianpeters8917 Год назад +1

    Alright so take it to a body shop, got it.

  • @sirdaddybigboss
    @sirdaddybigboss 3 года назад

    Hey man. Can the whole housing be fully disassembled cause Im about to install white side markers on mine.

    • @ipp2109
      @ipp2109  3 года назад

      Yeah, every hosting can be. You'd have to look up some videos but you need to heat up the assembly to loosen the glue holding it together. I belive its 220 degrees in the oven for 7 minutes

  • @gregfielding4032
    @gregfielding4032 3 года назад +1

    You should have backed your car up a lot more. That other car was distracting. Otherwise good video and instructions.

  • @anthonywillard6575
    @anthonywillard6575 5 лет назад

    How did you do a led conversion

  • @itsmeecjay4769
    @itsmeecjay4769 6 лет назад

    How did u remove the D1s?

  • @whyyouhinton04
    @whyyouhinton04 4 года назад

    Dude what kind of wheels are those, and where did you get them😭😭👀👀

    • @ipp2109
      @ipp2109  4 года назад +1

      They are actually the 18 inch rims from a 16 kia forte koup sx. The inside comes gunmetal, but I painted mine black

  • @hunterbidenscrackpipe810
    @hunterbidenscrackpipe810 4 года назад

    When I'm putting the thhhkreewws back in, do thkrew them tight?

  • @NoMurrcyProducedit
    @NoMurrcyProducedit 5 лет назад

    What are those orange hoses you have on there

    • @ipp2109
      @ipp2109  5 лет назад +1

      It's a hybrid. The high voltage wires are covered in orange to distinguish them from everything else.

  • @SJ20Jo
    @SJ20Jo 4 года назад +3

    Breaks tab... anyway. You can't really see it properly... anyway. Lols

  • @PrettyAndPink85
    @PrettyAndPink85 5 лет назад

    Will this apply for a 16 forte

    • @ipp2109
      @ipp2109  5 лет назад +1

      It'll probably be similar, but the location of the clips and screws would be different.

  • @Joel-re1jz
    @Joel-re1jz 2 года назад

    Crazy KIA has you remove a bumper to change a turn signal bulb.

    • @luislozano7947
      @luislozano7947 Год назад +1

      You do not have to remove headlight assembly, much less the bumper to change the turn lamp bulb. But you do have to remove the bumper to remove the entire headlamp assembly as he did in this video. He clearly says that at the end.

  • @bestbomb17
    @bestbomb17 4 года назад

    So uhh. Its dark out....i watched like first minute, got grille and top bolts out thinking that was it 😭😭😭 im gonna just squeeze and scrape my hands, my old forte was 2 bolts on the top of headlight and that was it, this is a whole days work

  • @Handlehandlebars
    @Handlehandlebars 2 года назад

    Well I must be an idiot because this completly broke main clips under the headlight for my bumper....

  • @beastmodeforever86
    @beastmodeforever86 3 года назад

    Dude, use a flashlight so we can see what your doing lol

  • @lotus956
    @lotus956 4 года назад

    Why, just why Kia? It’s a headlight!

    • @ipp2109
      @ipp2109  4 года назад

      You can replace the headlight without doing any of that. Just a simple cover over the back, But to remove the assembly you gotta take the bumper off

    • @michalsteslowski2457
      @michalsteslowski2457 4 года назад

      @@ipp2109 yeah, but to change turn signals you still have to deal with the bumper and everything else that was in this video

  • @latham40
    @latham40 2 года назад

    Monkey 🐵 see Monkey 🐵 do