"Unlock the Power of CW Mode with WinKeyer USB and Log4OM"

This video goes a little bit more in depth with using Log4OM and the CW mode, with special consideration given to the WinKeyer Tips and Tricks.
Links:
WinKeyer USB Purchase and Info: hamcrafters2.c...
Winkeyer USB Software Download: hamcrafters2.c...
Other K1EL Devices: hamcrafters2.c...
microHam devices: www.microham.c...
Good WKUSB setup video (not mine): • Introduction to the K1...
Chapters:
00:04 Introduction
00:29 Where to buy the WinKeyer USB
01:24 Winkeyer USB Driver Setup
02:03 Using WK3Tools app
04:54 Other things that use the K1EL Chip
07:33 Log4OM CW Setup with Macros
10:51 Demo of everything so far
12:39 End Notes
Thanks for watching - please remember to Like, Share, Comment, and consider Subscribing.
73 de Tom, ND3N

[@bitutube]

Thank you SO much for your explanation!! I have had a WinKeyer for several years but could never get it to work with my KX3. Turns out that I did not know about the Port Settings needed for the WinKeyer, which your video detailed. Once I made those changes to what had been my default settings for the WInKeyer Port, everything worked great!!! Many thanks.
Jim
N7RCS - Palm Bay, FL

[@ND3N]

Glad I could help!

[@Htfhjooffhgghwwwwdf]

THANKS for another excellent video Tom. I have ordered my WinKeyer based on your informative videos. Daryl de VK3AWA

[@Frank-KC3TDR]

I'd like to see a video detailing Yaesu FT-710, FLdigi and Winkeyer3 integration for CW and RTTY HW/SW setup/operation.

[@ND3N]

I can do that…. Thanks

[@jorgerueda7087]

Hi Tom KO4IOL Jorge I already have the WINKEYER USB to do CW but already connected everything well but when I test the messages on the radio Yaesu 991A it does not transmit. I have to make changes in the configuration to be able to transmit,

[@ND3N]

I don’t see a problem ??? Set up your functions as if your winkeyer is a straight key and it should work well

[@cam8754]

I have a FT 991 how do I connect a monitor to it Thanks M7XIX 73.

[@HP1CDZ]

Hi Tom, Duncan here, HP1CDZ, I have sent You an email but seems You haven't received it., I have set up my WKUSB however I don't have a Key/Paddle and must use my computer. when I tried to activate my device (; WKUSB) Will not tx using the WKUSB when punching the 4 buttons on top of the cage (red + 3 black buttons) can you help me wz tz? 73's ..... Duncan/hp1cdz

[@ND3N]

Hi Duncan…. Go to hamcrafters2.com/WK3tools.html and download the WK3tools 5.3 s/w and the associated guidebook. You’ll be able to connect your wkusb and define your messages. Use the guidebook for more info. Hope this helps

[@HP1CDZ]

@@ND3N Fine business Tom, tks for Your fast reply., Yes, I have programmed the device, however, when tried to key in the Red or other buttons will not work b'cause when I connect the CAT of my FT991A, will automatically disconnect the WKUSB device, is there a way to activate these buttons, use my FT991A without the Key/Paddle? In your video we notice You are using your Key or Paddle, how to do without the Key/Paddle using just your computer, sorry to bother you.

[@ND3N]

That’s strange because the cat controls have nothing to do with the wkusb. What serial ports are you using for the rig and the wkusb

[@HP1CDZ]

@@ND3N Good evening Tom, OK for the WK USB SERIAL CH340 (Com21) for the radio TS590S SILICON Labs CP210X USD TO UART BRIDGE (COM15) I haven't connected my CAT CONTROL SERIAL PORT ......

[@tomzaccaro6624]

Way too fast to follow the mouse to see what was selected to complete the first message.
Slow down for new users.

[@ND3N]

Sorry bout that