Man great effort. I learned alot. But agree that One don't have to buy the whole wire assembly. Just buy the rubber bushing. Or take the dimensions and let someone manufacture it for you. Anyway, you teach us a great tips thanks again
I changed myself, but just the rubber, buy it.. few dollars, then just fix it in to the hole( just lever Bush) Not by replacing all set of cable. Half and hour done. You No need to remove the gear lever cover, of course it will broken, just pull out the Shift knob, that it.
Pulling the shifter knob out is no joke man. It couldn't have just been a screw? You can take the console out without pulling the shifter knob off without too much trouble but it's a trap. There's some screws between the shiny plastic gear selector and the rubberized textured main console part (I think, been a bit since I did it) that become a pain in the ass to put back together.
What if the transmission stuck in drive, but the gear shifter still move up and down, but it still stays in drive. The vehicle does not go in Nutral or Park. What can cause that problem
Cable bad. Open the hood and remove the air box. You should be able to manually shift it at the transmission. Do not do it with the engine running. Have someone sit in the car and move the shifter while you watch the transmission gear select lever. I’m sure it’s not moving. Sounds like your cable either broke or it came off at the shifter.
I had many cars in my life that I drove up to 300,000 km+ and never had this broken! But on my kia it is! So many things brakes on this car a real piece of shit not made to keep a long time! Not expensive but not worth it either! My first and last Kia!
Same! I've never had as many problems as I do with my 2013 Kia forte. This happened on my car last night. It's always the weirdest and most strange things happening and breaking on this car.
How do you get out of the shift knob Because I want to change the same frame of skin that I pointed out that it breaks easily I can't to remove the shift knob
There is a metal clip on it. The clip has a small detent on each side. I used a small screwdriver to lightly pry out one side at a time while pulling up gently. Once one side is released hold a little tension so it does not clip back in and release the other side.
You broke the frame of the boot because you pull it wrong you have to to pull out the silver rim first that’s why you broke the plastic attached the boot. You should redo this video and don’t teach people wrong.
Man great effort. I learned alot.
But agree that One don't have to buy the whole wire assembly. Just buy the rubber bushing.
Or take the dimensions and let someone manufacture it for you.
Anyway, you teach us a great tips thanks again
Great video , thanks for taking the time to share .
Howdid you get the cable through the firewall?.....scratch that....I got it lol. Good vid
I changed myself, but just the rubber, buy it.. few dollars, then just fix it in to the hole( just lever Bush) Not by replacing all set of cable. Half and hour done. You No need to remove the gear lever cover, of course it will broken, just pull out the Shift knob, that it.
Pulling the shifter knob out is no joke man. It couldn't have just been a screw? You can take the console out without pulling the shifter knob off without too much trouble but it's a trap. There's some screws between the shiny plastic gear selector and the rubberized textured main console part (I think, been a bit since I did it) that become a pain in the ass to put back together.
ruclips.net/video/p_SfS2-_yDM/видео.html
So helpful. Thank you so much
Need a replacea cable on 2006 Hyundai getz fire wall diagram
Why arnt you showing how to remove cables 3:07
Not showing how to remove cables through fire wall
This is no help I want a diagram of cables through fire wall
Ok but how do you remove that center console cover???
What if the transmission stuck in drive, but the gear shifter still move up and down, but it still stays in drive. The vehicle does not go in Nutral or Park. What can cause that problem
Cable bad. Open the hood and remove the air box. You should be able to manually shift it at the transmission. Do not do it with the engine running. Have someone sit in the car and move the shifter while you watch the transmission gear select lever. I’m sure it’s not moving. Sounds like your cable either broke or it came off at the shifter.
@@avidanaamerica1315 yes it came off the shifter, got it fix tnx
Hi, how do you remove the shift knob of the forte 2012?
It just pull straight up. It’s not easy. It takes some force.
ruclips.net/video/p_SfS2-_yDM/видео.html
Not sure if it works for your model put on my 2010 Kia Forte all I had to do is replace the rubber bushing which was no more than 15 bucks😕😮😉
Same for 2011 Kia Optima lx
Hey, can u help me to find where is the central lock unit located in 2013 Kia Cerato..
I had many cars in my life that I drove up to 300,000 km+ and never had this broken! But on my kia it is! So many things brakes on this car a real piece of shit not made to keep a long time! Not expensive but not worth it either! My first and last Kia!
Same! I've never had as many problems as I do with my 2013 Kia forte. This happened on my car last night. It's always the weirdest and most strange things happening and breaking on this car.
Video on replacment of gear cables on a 2006 manual
This just happened to my 2010 this morning. Had it towed to my mechanic. $$$$$
If you had seen this sooner you could have saved a tow bill. It’s an easy fix
@@Listentoreadingfree This saved my life, because I was about to tow it, until I realized I could get my car into drive and get it home
This should be a direct swap with my 2010 Forte shifter assembly and shifter trim? Or am I missing something?
Posh Cheeky Twat ,yes.
why did you change the whole cable instead of just the grommet.it seems you are trying to justify charging someone a lot of money for nothing
This was years ago and the bushing was not available even at the dealerships. You have it easy now.
How do you get out of the shift knob
Because I want to change the same frame of skin that I pointed out that it breaks easily
I can't to remove the shift knob
amazing_man_d_17 you just pull it straight up. It is not easy.
amazing_man_d_17 Hi, have you managed to change your shift knob?
ruclips.net/video/p_SfS2-_yDM/видео.html
Hi wondering if you happen to buy another gear boot with frame if yes can you please tell me where thanks
Lakhan Verma no I did not need on but you can check the dealership
Where can I find videos on how to fix the console?
Can you show how to get the whole console off? That’s my brother in laws issue
There is a good video that shows how to remove it on RUclips. You can follow this in reverse.
ruclips.net/video/LpU8ExQ0zq0/видео.html
@@avidanaamerica1315I can't find it
I cant get the screws out. There is this plastic cover. Standing in the way. Gues im not that coordinated
Which screws are you referring to?
How do you remove the cover?
The boot?
ruclips.net/video/p_SfS2-_yDM/видео.html
How did you remove the motor side cable from the clip?
ruclips.net/video/8rizERL8A3k/видео.html
There is a metal clip on it. The clip has a small detent on each side. I used a small screwdriver to lightly pry out one side at a time while pulling up gently. Once one side is released hold a little tension so it does not clip back in and release the other side.
@@avidanaamerica1315 Thank you
Jesus. Dealer quoted me $1000 for this shit??? $180 just to replace that stupid little bushing
Wow, all you had to do was order the rubber bushing off Amazon!
i used a plastic fastener on mine just drilled a hole in it and used that.
Kanapa buli jadi bagitu tu ah bos?
Dang and all you needed was that 6$ bushing that needs 10 minutes to install
I actually bought a bushing kit.
But I have a very important question and I hope you will save me
Yes they should be the same.
Muy mal video no se ve nada por las letras que ponen en pantalla
You broke the frame of the boot because you pull it wrong you have to to pull out the silver rim first that’s why you broke the plastic attached the boot. You should redo this video and don’t teach people wrong.
How to get that fuckin shifter out ???
ruclips.net/video/p_SfS2-_yDM/видео.html