Ok, we had soooooooo much trouble trying to get bell part to click with the mounting. But I think I may have an idea.... When we took the "seal" off the mounting, the two pieces came together like a charm!! So, my husband and I are thinking the "seal" is actually just packaging and not necessarily supposed to be part of the mounting process.... I'm no blink expert, so take what I say with grain of salt. But, it WORKED ! Wish y'all the best!
As for as "Wired or Wireless", the doorbell is only powered by the batteries. If you connect it to the existing doorbell wiring, you can get it to activate your existing house doorbell.otherwise, you only get a chime on your phone when the doorbell button is pushed.
Thank you so much for your help. I found no manual of any kind in the box and was close to tears, but, RUclips, is always the place to check for anything. After reviewing all of the "Blink" videos, yours by far, is the absolute best. Thanks again!!!
Attaching the doorbell to the mount is a little difficult but once it locks into place it seems extremely sturdy. ruclips.net/user/postUgkxxHZwMa8CsRjYhf9s4W8w0Dwm47uytWOp I replaced my regular doorbell with this and hard wired it in, using my existing wires and mechanical chime. It works perfect so far and integrates perfectly with my blink camera system. It also works seamlessly with Alexa
The mount was something else but we followed the directions in this video and it was smooth sailing on out. Thanks for this video. It was very helpful.
The camera box did not come with any usable instruction. But I do thank you for the instructions. This Texan could not figure out how to mount it without this video. Thank you much
Thanks for your video. I already installed on of these at our new house and needed to install on at ky mother’s house so needed a refresher. Thanks again this really helped
If we already have a blink camera, so we need the sync module in order to use LIVE view on our doorbell (at any time, not just when it is triggered by motion)?
Thank you so much for this video. I got the doorbell and an outdoor camera off of amazon during prime day. I had no trouble setting up the doorbell today and Im gonna put up the outdoor cameral tomorrow.
Important note. Even if you use it as hardwired - it still runs on battery. The hardwire only makes your old doorbell work. It does not power the Blink doorbell camera.
@@Alvisr7 if you hook it up to the wiring of your old doorbell it should make the bell ring - if the doorbell transformer is powerful enough. Ours is really old and would have to be located and upgraded first.
my partner has bought one of these but thinks you must use a drill to put on mounting plate can you confirm if she needs a drill or can you just screw on it on
It’s the Sync Module important? I buy the video doorbell without the sync because I didn’t know I have to buy the Sync too 🤦🏻♀️ can I use it without the sync?
Is there a preferred height to instal it on the door frame ? I notice that ant see the porch floor to check if a parcel had been left there Love your videos Thanks
For the free plan, does it record video and delete after 24 hours? My camera was recording video upon first use, but now it is only recording motion detection. If I try to toggle on video recording, it says I need a subscription. I thought the camera would still record video/ take a picture?
Best install video hands down! You explained everything so thoroughly so I was able to do it as you did. I only got stuck on mounting the doorbell as I couldn’t get it to click in place but I figured it out. Thank you so much😊
I just bought the blink doorbell and two of the blink cameras for my husband for Christmas. Before I even start to mount the doorbell, do I absolutely need to have the sink module
Do not remove the seal. Read your instructions so the clips and holes line up. Check how to do it before installing. You have to push down pretty hard to get it to snap in place.
Purchased one of these, should turn up today. I was wondering when I install the app, do I have to install the app and go through setup again each time when my mum and dad want to use blink camera and doorbell on their phone?
Can you arm some of the devices and not all of them in your system? Ie..I want the doorbells/outside cameras armed all the time, and the inside cameras only when I am not home.
I have taken all the sticky plastic on it off but is there a sticky bit below the camera as it’s seems a dull look but I can’t get plastic sticky off ?? Should I
I have a security questions: would be a good idea to remove the barcode for the blink door bell ones install in my app? I am afraid that by living the barcode with the unit some one my scan that barcode with a different phone an gain access to my camera, would that be possible?
One question , I just got the blink doorbell for my home and it came with the sync module and I plugged it in and everything is working perfectly but my question is do I have to keep the sync module plugged in bcuz that's gonna be a problem in my bedroom
the small screws with kit went through the back plate holes and the wedge holes but then would not actually screw in. Any ideas?? its like they need to supply a longer screw???
@@kamiliablack7167 I broke the 1st one I bought another put I notice with the 2nd one it didn’t have the seal on it and it worked without it! That might work… good luck
Just tried installing one with the angle mount and the blink won't click in, had to rid up spacers on the plate to space out the mounting plate for the doorbell from the angle mount to get it to lock in place. It took over an hour to get it to lock in place. Now it won't get power from the existing doorbell so it looks like I need to use the batteries.
A simple question: With the wireless system as you have put, what happens when someone presses the doorbell. Does your phone alert you? If you have Echo screen would that chime? Where is the audio 🔉 noise coming from to alert you? i.e. ding dong sound!?
Mine will literally not click into the back plate, no idea y but no matter wat I do it wont click in, just sits in place and u can easily pull it off the back plate
Thank you so much for this video. Zero instructions included in box. I’ve workedon this two days now. So I don’t want to do any subscription. Do I just put a thumb drive in the sync module box? Do I need to change any settings? Thanks again!
No, up to 10 blink devices can be connected to one module. But if you need extra or more range you can get additional Blink Modules here: amzn.to/3UTsuMT
@@chiquitawhitley7659 I followed the instructions and have it operating on my blink app and alexa. The video shows only on the blink app (so far). I'm still not sure why I need the sync module unless I have other blink devices. Definitely a learning curve...
Ok, we had soooooooo much trouble trying to get bell part to click with the mounting. But I think I may have an idea.... When we took the "seal" off the mounting, the two pieces came together like a charm!! So, my husband and I are thinking the "seal" is actually just packaging and not necessarily supposed to be part of the mounting process.... I'm no blink expert, so take what I say with grain of salt. But, it WORKED ! Wish y'all the best!
This was helpful! It worked thanks!
@@JoseGarcia-uh1wy glad i could help! 😊
Thank you. Was about to repack and take back to store!!🤗
@@sonyafrazier3017 you're very welcome 😁
thanks for tip , so helpful
As for as "Wired or Wireless", the doorbell is only powered by the batteries. If you connect it to the existing doorbell wiring, you can get it to activate your existing house doorbell.otherwise, you only get a chime on your phone when the doorbell button is pushed.
Thanks I was wondering that too if you don't have wired
Will it still give you notifications if you get it wired?
@@ginadelena4296 Yes. Wired or wireless, you will always get a notification on your phone.
How do you wire it?
@@trutranx how do you wire it ?
Where’s the wired install video??
Thank you so much for your help. I found no manual of any kind in the box and was close to tears, but, RUclips, is always the place to check for anything. After reviewing all of the "Blink" videos, yours by far, is the absolute best. Thanks again!!!
Get a therapist as well. Not having instructions should not be that emotional of an event.
This just became available to buy in the UK. I just got mine. This video is miles better than any of the instructions Amazon included. Thanks.
Great video! Your instruction is very clear and easy to follow. I definitely feel a lot more confident about installing the one I just purchased.
Attaching the doorbell to the mount is a little difficult but once it locks into place it seems extremely sturdy. ruclips.net/user/postUgkxxHZwMa8CsRjYhf9s4W8w0Dwm47uytWOp I replaced my regular doorbell with this and hard wired it in, using my existing wires and mechanical chime. It works perfect so far and integrates perfectly with my blink camera system. It also works seamlessly with Alexa
Thank you!!! This video helped me so much. I didn't even use the instructions that came with it. Just your video! Thank you so incredibly much.
The mount was something else but we followed the directions in this video and it was smooth sailing on out. Thanks for this video. It was very helpful.
Did it come with the door mount
@@DemiDemi1 yes
What if you already have internet at home can you just hook the blink up to your internet connect without buying the square blink.
The camera box did not come with any usable instruction. But I do thank you for the instructions. This Texan could not figure out how to mount it without this video. Thank you much
Thanks for your video. I already installed on of these at our new house and needed to install on at ky mother’s house so needed a refresher. Thanks again this really helped
Do you need the module if you are hooking it up to and Echo show?
I like it. The corner bracket was a little confusing thinks for clearing things up. Great and Informative video.
How can I view my surroundings live? I don't have a camera icon on my app?
Are doors made the same, I wonder? Cos that part of my door is CONCRETE SOLID. Lol. Idk if a screw will even go into it..... do I put it in the vinyl?
I know you need that module for local recording but I did not think it was a must have for other use.
Superb sir, thank you very much. Followed this step by step and installed with no problems.
Thank you! Was stumped after I added the module. I was sure the doorbell had already been added ie. passcode sent to my phone, etc. Sorted!
Will this work with command strips? If you’re renting an apartment and don’t want to screw holes and all.
If we already have a blink camera, so we need the sync module in order to use LIVE view on our doorbell (at any time, not just when it is triggered by motion)?
You do not need the blink module. The doorbell works fine as a stand-alone but you do loose some features
What features do you miss out on, if you don’t have the module ???
okaaaaay i did it after all. It was so easy thanks to you. i dont know why people have a hard time slipping the bell on.
Thank you so much for this video. I got the doorbell and an outdoor camera off of amazon during prime day. I had no trouble setting up the doorbell today and Im gonna put up the outdoor cameral tomorrow.
Can you connect both battery and hardwire or one or the other
Battery needs to be installed regardless if wired
So in order to operate this blink I have to purchase sinc module?
Thank you for showing how to use the mount. I didn’t even know what that was and it really helped.
Important note. Even if you use it as hardwired - it still runs on battery. The hardwire only makes your old doorbell work. It does not power the Blink doorbell camera.
How do you make it work with door bell?
@@Alvisr7 if you hook it up to the wiring of your old doorbell it should make the bell ring - if the doorbell transformer is powerful enough. Ours is really old and would have to be located and upgraded first.
Good point!
So ill need a sync module then as I never got one with the doorbell, right thanks.
Perfect amazing explanation of how to install this doorbell. Thank you so much.❤
Good to watch a video when you don’t know what you’re doing . Great job 👏
Ive just purchased one in the uk and set it up but don't seem to have half the settings you do to adjust it
I wanna know how to setup these two black wires came with blink video doorbell with the existing old doorbell wire so that my traditional chime works
my partner has bought one of these but thinks you must use a drill to put on mounting plate can you confirm if she needs a drill or can you just screw on it on
Does the module need to stay connected at all times once you have the door bell set up?
Is it possible to get spares for Blink video bell? The back of bell was damaged so need the back that screws to wall.. thanks.,
Very helpful i didnt have modle had to order one all i ways getting is red flashing lift no idea what it means
Can i add module after the doorbell is installed...doorbell ringing on my phone but not the module. Im guessing module is not set up completely
When you press the doorbell will the Chime work off an existing chiming unit?.
It’s the Sync Module important? I buy the video doorbell without the sync because I didn’t know I have to buy the Sync too 🤦🏻♀️ can I use it without the sync?
Can this be hooked to two phones mine and my wife’s? Thanks
I have the block module from my original block security cams can I use it for the blink doorbell
Where does the chime sound come from when someone rings the doorbell? Phone?
How tough is the device can it smash up easily rip it off with force?
Is there a preferred height to instal it on the door frame ? I notice that ant see the porch floor to check if a parcel had been left there
Love your videos
Thanks
For the free plan, does it record video and delete after 24 hours? My camera was recording video upon first use, but now it is only recording motion detection. If I try to toggle on video recording, it says I need a subscription. I thought the camera would still record video/ take a picture?
Does the module need to stay plugged in or was that just for the set up?
Great video, very informative.
But am I able to connect the Blink to my existing wireless door bell?
Please advise.
Thank you
I bought the door bell but the module wasn't included. Do I absolutely need the module?
If we don't have module cam we still hook it up to on Wifi,?
Best install video hands down! You explained everything so thoroughly so I was able to do it as you did. I only got stuck on mounting the doorbell as I couldn’t get it to click in place but I figured it out. Thank you so much😊
What did you figure out? I've been trying, per Blink video, for hours!
I just bought the blink doorbell and two of the blink cameras for my husband for Christmas. Before I even start to mount the doorbell, do I absolutely need to have the sink module
does the doorbell ring anywhere else other than the actual doorbell itself? I mean can you hear it inside the house too?
TY
You need the module to use a chime too?
Thanks. What “seal” do you refer to? I am also struggling with this.
The thin rubber piece that wraps around the inside of the mount piece! Remove that!
@@MaytalyM that's a waterproof seal. DO NOT REMOVE it.
Do not remove the seal. Read your instructions so the clips and holes line up. Check how to do it before installing. You have to push down pretty hard to get it to snap in place.
My kit did not come with a wedge mount. Where do I get this?
Purchased one of these, should turn up today. I was wondering when I install the app, do I have to install the app and go through setup again each time when my mum and dad want to use blink camera and doorbell on their phone?
Do you need sync module to run this doorbell
I didn’t see him hang the wedge piece. Do I have to use it?
Thank you very much. Made installing The Blink video camera so much easier.
❤ love this instruction but how do you get to hear the doorbell...?
Through your phone, the module or how...?
Can you arm some of the devices and not all of them in your system? Ie..I want the doorbells/outside cameras armed all the time, and the inside cameras only when I am not home.
I have taken all the sticky plastic on it off but is there a sticky bit below the camera as it’s seems a dull look but I can’t get plastic sticky off ?? Should I
My doorbell doesn't have the wedge or that closed back mounting plate the flat plate has a huge cutout on the top 1/3rd of it?
14:33 For installation instructions.
is this suppose to work with echo show, I got it to work once, I know not how, but before that and after It says "...doesn't support that"
I have a security questions: would be a good idea to remove the barcode for the blink door bell ones install in my app? I am afraid that by living the barcode with the unit some one my scan that barcode with a different phone an gain access to my camera, would that be possible?
I have door bell just separate with sync module 2. Would it still work
?
One question , I just got the blink doorbell for my home and it came with the sync module and I plugged it in and everything is working perfectly but my question is do I have to keep the sync module plugged in bcuz that's gonna be a problem in my bedroom
Great video BTW, very helpful & knowledgeable
the small screws with kit went through the back plate holes and the wedge holes but then would not actually screw in. Any ideas?? its like they need to supply a longer screw???
All video is really beautiful and helpful but I don't know how I can talk with somebody who is ringing my doorbell...?
Just got my blink I just can’t put the back on any suggestions?
Me either. Did you figure it out?
@@kadazjiamonay5219 I had to purchase another back plate because I broke the original.. I finally got it it took awhile but it’s done. So be patient
@@evarodriguez7978 how you did it, I cannot figure this out, mine wont clip
@@kamiliablack7167 I broke the 1st one I bought another put I notice with the 2nd one it didn’t have the seal on it and it worked without it! That might work… good luck
Thank you very much
Where is the video for hardwiring it?
Can I have the link to the wired version video please?
Do you really need a blink Module for the Video Doorbell to work or can it work by itself and app download only?
I just bought this doorbell and thanks 🙏🏾 to your instructions it was super easy for me to get it setup. Thank you 😃😃😃😃😃
How is the video quality?
Fantastic Video on the Blink Doorbell and accessories. So far, this is the best video I've seen
Hello what if i dont have any door bell? will it ring to my phone or...else?
I’m signing into the app it says I have to pay ? Also is there a way I can have it work permanently without having to keep changing the batteries
So. cannot install the doorbell without the sync component? Is that right?
Thank you so much for the detailed explanation. Now I know I need a sync module 2.
Thanks for watching and the comment, glad to help!
Just tried installing one with the angle mount and the blink won't click in, had to rid up spacers on the plate to space out the mounting plate for the doorbell from the angle mount to get it to lock in place. It took over an hour to get it to lock in place. Now it won't get power from the existing doorbell so it looks like I need to use the batteries.
What about a chime? How do hear the bell?
If I set this up without the hard wire do I have to charge the door bell often?
Do you have to use that piece to unmount it. I can't find it and I need to resync the doorbell
Can you do both, battery and wired or you have to pick one?
So it doesn’t have to be hard wired to get sound?
Does the module need to be continously plugged in after installation
how far from the ground do you install the doorbell
A simple question: With the wireless system as you have put, what happens when someone presses the doorbell. Does your phone alert you? If you have Echo screen would that chime? Where is the audio 🔉 noise coming from to alert you? i.e. ding dong sound!?
This really helped thank you, I just got mine
Great to hear!
Did it come with that door mount?
Do you have to drill or can it just be stuck on?
Why the heck would someone say oh all you need is the doorbell camera... now I have to get a sync module. It's never simple is it?
Mine will literally not click into the back plate, no idea y but no matter wat I do it wont click in, just sits in place and u can easily pull it off the back plate
Thank you so much for this video. Zero instructions included in box. I’ve workedon this two days now. So I don’t want to do any subscription. Do I just put a thumb drive in the sync module box? Do I need to change any settings? Thanks again!
Thanks couldn't get it to click till seen your vid. Thanks
Can I connect the wires from the old doorbell into the blink one?
Yes but it needs to have enough voltage to work, somewhere around 12 volts. Otherwise go wireless & it will ring through your Alexa devices
@@j1238066 thank you so much for your help and your quick response,cheers!
Do I need a module for every camera I want to add ?
No, up to 10 blink devices can be connected to one module. But if you need extra or more range you can get additional Blink Modules here: amzn.to/3UTsuMT
Thank you didn’t know I needed the sync module 😞 got it now
I know me neither. They should just mark up the price a little and include it
It sucks! The instructions on the box doesn't mention needing the sync module
@@aNuthaRedneck exactly what I said lol
@@chiquitawhitley7659 I followed the instructions and have it operating on my blink app and alexa. The video shows only on the blink app (so far). I'm still not sure why I need the sync module unless I have other blink devices. Definitely a learning curve...
@@aNuthaRedneck I’m having the same problem I have it synced to both but for some reason the Alexa want alert me when someone is at the door