Yamaha RX-1 Overheating Cure Heat Exchanger

#yamaha #snowmobile #yamaharevsyourheart Yamaha RX-1 Overheating Cure Heat Exchanger. We install the rx1 heat exchanger from the 2005 model to cure an overheating problem
Get the parts I use below:
Suspension Spanner Wrench set: amzn.to/3UgdR7t
Snowmobile Ear Plugs: amzn.to/3YtHYe1
Stacool Scratchers: amzn.to/3YrPYw1
Folding Saw: amzn.to/3A2Kw9F
Kimpex Plug 993907: amzn.to/3YwVgGP
50/50 ready to use antifreeze: amzn.to/4dTvi4w
Lock and Lube no leak zerk adapter: amzn.to/4dUgHpD
Yamalube 2S: amzn.to/4dPjO29
Chain case oil: amzn.to/4fblrIj
DISCLAIMER: Not liable for anything you attempt after watching one of my videos. These videos are for entertainment purposes only. Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!-

[@mikewilson7132]

i need to do that 2 my nytro took my hood off then it didnt have warning light on

[@davemarin2760]

do you have to remove the bleeder completly and start up the ski doo and make it run to get out all the air in the prestone pipe

[@MiloFarms]

When I first filled it with antifreeze I had it sitting flat on the floor and completely removed the bleeder screw till the antifreeze came out. Then I overfilled the antifreeze reservoir to the brim and put the lid on. I just loosened the bleeder screw and got some more air out. Then I started the sled and tried different positions with the back of the sled lifted in the air and on the ground just slightly opening the bleed screw till all the air was gone. It is very important to get all the air out. The same process will have to be repeated every few years when you change the antifreeze.