To be 100 with you bro it's a toss up. Those 2 guns are the top of the food chain with spray guns. Only good thing with Sagola you can change out caps and turns the gun into a completely different spraying experience.
Seems like I see these the most for sale online. They say when you buy a new one you get a choice. You can either opt for the sata jet nose or toe ring! 😄
Sata 4ever! 😎🏆 I still use the 1st I ever bought. A Sata Jet 90 RP. Crank that pressure up to 60lb & bust that clear up 😂 Its the fault of who taught me to paint🤷🏼♀️& It's a hard habit to break...
Is that a swivel fitting I see?🤔😄 Can’t stand it with a regulator either but I do like em on the Sata digitals or with an Adam 👍🏻 Loves me some way f’in overpriced Sata and I Loooove painting black! Looking good!💪🏻 Is the fluid control knob from another gun?🤨
Man I bought one of these used from this guy on offer up. As soon as I grabbed it I said man this thing feels heavy, didn't even have a cup on it. I never used it because it had an air leak. The guy was nice enough to give me my money back. Somebody else would've just took my money.
Dam yea you got lucky on that one. When I buy stuff from OfferUp I like to go to the person's house so just in case you sell me some BS trigger man will be back ya dig. I didn't notice the weight I'm use to lifting heavy stuff so it probably didn't hit me the same.
@@thetriggerman954 I ain’t trying to take away from the gun but it’s the man behind the trigger. A lot of people have that gun and can’t get the same results. Keep crushing it 👊🏽
triggerman, my dv1 base broke after only a couple months of using it 🤦♂️. now i’m looking for a new base gun. i’m leaning towards sata hvlp because i know they are built to last. i can get one brand new unopened for $775. what do you think would be good for base.
Dam DV1 broke what the hell you did play baseball with it? My DV1 going years and years now. Every good brand has a nice base gun. Prolite isn't a bad choice either. Man I'd contact devilbiss if I were you. They have replaced guns for me in the past, they have great customer service. Honestly bro start there contact Devilbiss customer service. Because that shouldn't happen unless you dropped it or something.
@@thetriggerman954 it started leaking air from the cap and it just got worse and worse. i clean it everytime i use it too. i’ve been contacting them but they just been giving me some rara bs
@@nickcrill7718 the o sprays exactly like my 5000 the I is narrower and I'm gravitating towards that one more for some reason . Definitely a good gun as expected from Sata. But worth $1200 🤔🙄😂😂
So expensive in your country for a Sata ? I'm from Germany sure there are import taxes custom fees to import but I'm sure you will get it for about 800$ with shipping tax vat ....
@thetriggerman954 I've been using it for a year but csnt get the right settings lol. It's always really glassy or a bit of orange peel man. Spraying with sikkens superior clear
@@canadianpainter8344 thank you man. And you're more than welcome I'm glad you enjoy the vids. At times I feel like it's too much work and not worth it then someone like you says something nice like that and it keeps me going. Thank you I appreciate you ❤️
Every painter needs his SATA
Damn trigger man!!! Nothing like a glass slick black paint job!!!! Damnit!!!!!
💪🏼 yes sir. I couldn't agree more 😬
Got the 1.3cc , a lot finer spray than the standard, love it 😍
You're in the US? To my knowledge it's not sold here. Unless you buy offline of course 🤔
@@thetriggerman954 uk , think it’s newly released, was using 1.2 i nozzle before which was really good 👍🏻
Yessir 💪 I knew that you were going lay down dat clear slick,glass with that BADD BOYY❤🔥👌👏👍🏻💯
😎 4 shizzle 💦💦💦
Damn, ice isn't that slick, Triggger. Beautiful. Question: for HS clear, do you like this or the sagola 4600 better? Or is it a toss-up?
To be 100 with you bro it's a toss up. Those 2 guns are the top of the food chain with spray guns. Only good thing with Sagola you can change out caps and turns the gun into a completely different spraying experience.
Seems like I see these the most for sale online. They say when you buy a new one you get a choice. You can either opt for the sata jet nose or toe ring!
😄
Lmao Toe rings got damn E 😂
@@thetriggerman954 😄
Sata 4ever! 😎🏆 I still use the 1st I ever bought. A Sata Jet 90 RP. Crank that pressure up to 60lb & bust that clear up 😂 Its the fault of who taught me to paint🤷🏼♀️& It's a hard habit to break...
Right on! 🤣 I have a few videos on the Sata jet 90 classic gun
Great clear gun I use it at 30/32 psi
I had it at 33 on the Adam2 gauge and it layed this sucker out nice
@@thetriggerman954 hell yea lay that glass brother
@thetriggerman954 what's the Adam2 gauge? I use the devilbiss digital
@@johnpoccia4981 you see that big thing on the back where the air pressure normally is? That's a big built in digital gauge. Fancy pancy sh!t 😀
@@johnpoccia4981 ccassolutions.com.au/product/sata-adam-2-removable-digital-gauge-with-docking-pod-mini/
Is that a swivel fitting I see?🤔😄
Can’t stand it with a regulator either but I do like em on the Sata digitals or with an Adam 👍🏻
Loves me some way f’in overpriced Sata and I Loooove painting black!
Looking good!💪🏻
Is the fluid control knob from another gun?🤨
@@Mr1fingersalute that fluid knob is SATAs new pre set knob. Another expensive add on 😂
The only gun I clear with now.. can basically close my eyes and spray its so nice.... oi that looks juicy asf. Nice work.
Thank you brother it's a nice one for sure
Man I bought one of these used from this guy on offer up. As soon as I grabbed it I said man this thing feels heavy, didn't even have a cup on it. I never used it because it had an air leak. The guy was nice enough to give me my money back. Somebody else would've just took my money.
Dam yea you got lucky on that one. When I buy stuff from OfferUp I like to go to the person's house so just in case you sell me some BS trigger man will be back ya dig. I didn't notice the weight I'm use to lifting heavy stuff so it probably didn't hit me the same.
@@thetriggerman954 the only reason it felt heavy to me is because I was use to using the iwata kiwami4 and you know iwata guns are super light.
Oh yes now that's what I'm talking about , in the right hands trig that's a freaking weapon 😊😊😊😊
I like the I pattern much better. Beast mode
@@thetriggerman954 eint that wierd so do I 😁😁😁
@@deanbrown7643 🤣🤜🏼🤛🏼
Don’t fall for it triggerman! It’s not the gun it’s u!!!
I'm not falling for it Brother I just had to see what all the hype was about. 🙄 few videos coming up on it. 💪🏼
@@thetriggerman954 I ain’t trying to take away from the gun but it’s the man behind the trigger. A lot of people have that gun and can’t get the same results. Keep crushing it 👊🏽
@@juanmata2433 trueeeeee 🫡👊🏽
Boss
Yessir.✊🏾
✊🏽
Hey trigger. What cap do you have for the 3300 for basecoat?
The Tech cap
What i thought it was Black Widow.
triggerman, my dv1 base broke after only a couple months of using it 🤦♂️. now i’m looking for a new base gun. i’m leaning towards sata hvlp because i know they are built to last. i can get one brand new unopened for $775. what do you think would be good for base.
Dam DV1 broke what the hell you did play baseball with it? My DV1 going years and years now. Every good brand has a nice base gun. Prolite isn't a bad choice either. Man I'd contact devilbiss if I were you. They have replaced guns for me in the past, they have great customer service. Honestly bro start there contact Devilbiss customer service. Because that shouldn't happen unless you dropped it or something.
@@thetriggerman954 it started leaking air from the cap and it just got worse and worse. i clean it everytime i use it too. i’ve been contacting them but they just been giving me some rara bs
What the hell cup
Is that . Looks like a custom job
Devilbiss Dekup disposable cup system
Glass 4 Dat Azz
Slick 👌 I have the 1.3I set up I find I have to wind the fan in like a qtr turn and it sprays amazing
I sprayed it with the 1.3i wide open it sprayed fine. Maybe the materials, or temp so many things can cause that.
In Europe we use the clock wise 10min to close
@@konstantintop-painting6882 That is the European secret recipe huh 🤓💪🏽
@@thetriggerman954 in Europe it's not a secret the most painters using sata
@@konstantintop-painting6882 I know man just joking around 😒🙄
Wet like water 💦💦💦
Definitely my favorite gun
The gun sprays good I'm liking the "I" pattern much more than the O.
@@thetriggerman954 yeah I didn’t notice a huge difference but I don’t use the o very often
@@nickcrill7718 the o sprays exactly like my 5000 the I is narrower and I'm gravitating towards that one more for some reason . Definitely a good gun as expected from Sata. But worth $1200 🤔🙄😂😂
@@thetriggerman954man that's like 100 vevors 😂
So expensive in your country for a Sata ?
I'm from Germany sure there are import taxes custom fees to import but I'm sure you will get it for about 800$ with shipping tax vat ....
They are $1,200 here 😒😭
Trigg.... That's soooo glossy man.... Sata is the king for me... But first it's your magic hands.... 😊
Thanks brother, Sata is good. Not really king for me but it does that job, and at a high price too 😜😀
There's also new satajet x5500 rp 1.3CC special made for clear with a nice red special design...
Yes!!!! Supposedly works wonderful for clear. I’d love to try it
Yes but that gun is not sold in the US
@@thetriggerman954 SpraygunsDirect has them and will ship to the USA
Maybe there's a way to supply 😅
@@lukyautomat 🤔 you might be on to something 😉
What aettings you use? Wide open fan and trigger?
Wide open fan and 2 turns out on fluid. It's a hoser so be careful 😬
@thetriggerman954 I've been using it for a year but csnt get the right settings lol. It's always really glassy or a bit of orange peel man. Spraying with sikkens superior clear
@@dandee28 well that sounds perfect either glassy or a little peel what type of finish are looking for ? 🤔
Hey man, what did you set up the fluid to and pressure for clearcoat?
Fluid 2 turn out from closed. 33 psi on the Adam pressure gauge
@thetriggerman954 thanks brother.
Hi Trigger, wish you the best of the holidays. Thanks for your hard work making videos for us. Much appreciated.
@@canadianpainter8344 thank you man. And you're more than welcome I'm glad you enjoy the vids. At times I feel like it's too much work and not worth it then someone like you says something nice like that and it keeps me going. Thank you I appreciate you ❤️
You are welcome Brother
She sho is purdy
😀😀😀
Everyone and they momma talking about that gun, is it the truth ? Is it nice nice ?
It's a decent gun. But for the price I'd rather buy 2 sagola spray guns 😂
@thetriggerman954 What would be your two Sagola choices?
@@Mr.Bell229 4600 and the 3300. That's two guns one for base one for clear for the price of this one SATA jet gun.
@@thetriggerman954 3300 for Base and 4600 for Clear?
@@Mr.Bell229 yes sir. All day