Thanks for the feedback! Did you know we have over 1100 automation videos videos like it? Check it out here: www.automationdirect.com/videos (random search) www.automationdirect.com/cookbook (by category)
i watched the video. unfortunately it still not working. the F070 error keep on appears whenever i tried adjust perimeters n stuff. Help me pleaseeee! this problem happens after the ramp automatically stop as I adjust the speed to 30hz.
Hi Nizam, The fault codes are listed in this document: cdn.automationdirect.com/static/manuals/wegdrives/programmingmanual.pdf on pg 1-1. Sounds like you are trying to ramp to 30Hz? Try a longer accel ramp (2X, 4X). If that fixes it, then your load is simply too big for the accel rate you are currently using. If that doesn't fix it, then contact our free technical support during regular business hours - they will be happy to help. You can see all of our tech support options here: www.automationdirect.com/support
Hi Nizam, The fault codes are listed in this document: cdn.automationdirect.com/static/manuals/wegdrives/programmingmanual.pdf on pg 1-1. Sounds like you are trying to ramp to 30Hz? Try a longer accel ramp (2X, 4X). If that fixes it, then your load is simply too big for the accel rate you are currently using. If that doesn't fix it, then contact our free technical support during regular business hours - they will be happy to help. You can see all of our tech support options here: www.automationdirect.com/support
May I ask, My cfw11 status red led stays on ( flashing ) it doesn’t turn green in ready mode it keeps giving me Overcurrent/short-Circ please help me out.. I try to remove the power supply, press the reset button, set the P0340 ( auto reset ) it’s still in flashing red light
can you please help me how to fix the problem w/ my vfd TECO A510 series on the display it appears OC I already check the wiring on the VFD and also the winding of the motor and its fine I attempt to reset the fault but sadly it doesnt even work and also tried to reset to factory default but again it doesnt work I tried to disconnect the motor terminals on the VFD and try energize the vfd without the motor But again the OC fault appear on the display. How can I fix this. hope that you can help me.
HI Mat, The TECO A510 isn't sold by AutomationDirect so we are not familiar with that drive and can't provide detailed support. But in general, if you are getting and overcurrent fault with no load, then you either have a bad configuration or something is wrong inside the drive. Try resetting to factory default and operating with no load. If you get a fault, there is probably something wrong with the drive. If you don't then you have a configuration error. Free tech support and free tutorial videos is just one of the reasons folks prefer to buy from AutomationDirect.com.
Thanks dear elder brother for your helpful tutorials 👍.
You're welcome! Make sure to check out more of our videos at www.automationdirect.com/videos/home
Think you for very interesting video
Thanks for the feedback!
Did you know we have over 1100 automation videos videos like it?
Check it out here:
www.automationdirect.com/videos (random search)
www.automationdirect.com/cookbook (by category)
i watched the video. unfortunately it still not working. the F070 error keep on appears whenever i tried adjust perimeters n stuff. Help me pleaseeee! this problem happens after the ramp automatically stop as I adjust the speed to 30hz.
Hi Nizam, The fault codes are listed in this document: cdn.automationdirect.com/static/manuals/wegdrives/programmingmanual.pdf on pg 1-1.
Sounds like you are trying to ramp to 30Hz? Try a longer accel ramp (2X, 4X). If that fixes it, then your load is simply too big for the accel rate you are currently using. If that doesn't fix it, then contact our free technical support during regular business hours - they will be happy to help. You can see all of our tech support options here: www.automationdirect.com/support
May I ask, what is "the ground fault and output overcurrent protections"? - related to F070
Hi Nizam, The fault codes are listed in this document: cdn.automationdirect.com/static/manuals/wegdrives/programmingmanual.pdf on pg 1-1.
Sounds like you are trying to ramp to 30Hz? Try a longer accel ramp (2X, 4X). If that fixes it, then your load is simply too big for the accel rate you are currently using. If that doesn't fix it, then contact our free technical support during regular business hours - they will be happy to help. You can see all of our tech support options here: www.automationdirect.com/support
@@automationdirect wow okay thanks i try it later tomorrow!
May I ask, My cfw11 status red led stays on ( flashing ) it doesn’t turn green in ready mode it keeps giving me Overcurrent/short-Circ please help me out.. I try to remove the power supply, press the reset button, set the P0340 ( auto reset ) it’s still in flashing red light
can you please help me how to fix the problem w/ my vfd TECO A510 series
on the display it appears OC I already check the wiring on the VFD and also the winding of the motor and its fine
I attempt to reset the fault but sadly it doesnt even work and also tried to reset to factory default but again it doesnt work
I tried to disconnect the motor terminals on the VFD and try energize the vfd without the motor But again the OC fault appear on the display.
How can I fix this.
hope that you can help me.
HI Mat,
The TECO A510 isn't sold by AutomationDirect so we are not familiar with that drive and can't provide detailed support. But in general, if you are getting and overcurrent fault with no load, then you either have a bad configuration or something is wrong inside the drive. Try resetting to factory default and operating with no load. If you get a fault, there is probably something wrong with the drive. If you don't then you have a configuration error. Free tech support and free tutorial videos is just one of the reasons folks prefer to buy from AutomationDirect.com.
Why my inverter error code F099 ?