Thanks for the link on the pinion gears on the last Danchee video!! I finally got my 37t motors in because of it! I also put a set of 90mm desert lizard shocks, with droop, and a low profile body (Traxxas Rustler cut LOW) 1080 speed control, and 25kg servoes…. It’s a BEAST!
Bought my grandson one about a year ago for around 100$ great little rig stock tires are super hard but easy fix , ran great till he launched off a 13ft cliff and broke one lower control arm ( to my surprise that was it) fixed and back on the trail
I see a bully rtr in the future of this channel. It’s a shame that the MOA market is so limited. Our danchee has really gotten me interested in moa comp crawlers like the bully. Wish there was more of an aftermarket for the danchee we love ours.
Wow ! That's alot of concrete ! That truck is really good articulation , I'm building on a rear steer Capra right now , that thing is gonna twist bind over everything ,😂
Great rc, I want this one👍🏾 Exocaged, I have a question when you get a chance, which 1100kv motor has more torque in your opinion, Hobbywing or Castle or do you like the 1650kv better?
i just ordered the coolest wheels (i love skulls) hobbysoul Ghost 2.2 beadlocks and a set of 2.2 xl mud slingers for my integy 2.2 rock crawler that i have super extended with 1.50 inch longer 4 link front and back . i used to use jr racing for my servos what happened to them (jr) ?
YOU HAVE MORE MONEY IN WHEELS AND TIRES THAN THE TRUCK RTR. THE DRIVE CUPS AND STUB AXLES BRAKE THE PLASTIC TO EASILY TO ADD ANYTHING MORE. I AM STILL WAITING ON PARTS ORDERED LAST YEAR MYSELF FOR THIS REASON. OTHER THAN THAN, IT IS HARD TO BEAT FOR THE MONEY.
There's no aftermarket gears, I think it's just a generic unit that Redcat rebrand. The Facebook group has some folks investigating but small run fabrication is expensive.
I always wanted a "bouncer" but never got around to it, might build one of those rigs. I don't have much rock...just the odd riprap here n there but that's not really rock crawling, just going over a rock...one at a time lol. But I do have a huge...50ish acer washed out pond full of slopes, plato's, and ravines cut from water run off. The terain is redclay and pine straw...lots of it, the challenges on navigating the terrain vary greatly depending on how wet it is, dog days of summer the clay is hard as hammerd cat poo and dusty, actually harder to climb then when its wet, a rig like this would be fun there..like 1/1 hill climbs. My trail trucks usually lack the wheel speed to totally conquer the hills, which leads to alternate routes, but yea bouncer country lol
been loving the danchee material lately 👌. thought it was gonna be a shelf queen. not too impressed with stock ( except the price was amazing ) that being said your mods are killer keep them coming maybe some aluminum hubs would be sweet. just wondering if I missed it. if not could you go over or maybe put link in for your transmitter again I love the dig. it's a must for me now. lol that temp dig is 🤯.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Proves that money isn't everything! Cheap and still buildable. And still lots of fun👍
Thanks for the link on the pinion gears on the last Danchee video!! I finally got my 37t motors in because of it! I also put a set of 90mm desert lizard shocks, with droop, and a low profile body (Traxxas Rustler cut LOW) 1080 speed control, and 25kg servoes…. It’s a BEAST!
We have that car here in the UK, its known as an FTX Ravine and its really popular. 👌
Love your vid, because of it I bought my Danchee 👍
Awesome spot, awesome rig!
Adapting some sort of portals would help with the gearing. Wonder how difficult it would be to do? Love the progress of this project .
Cool idea but extremely difficult with those stock housings.
Bought my grandson one about a year ago for around 100$ great little rig stock tires are super hard but easy fix , ran great till he launched off a 13ft cliff and broke one lower control arm ( to my surprise that was it) fixed and back on the trail
I see a bully rtr in the future of this channel. It’s a shame that the MOA market is so limited. Our danchee has really gotten me interested in moa comp crawlers like the bully. Wish there was more of an aftermarket for the danchee we love ours.
Wow ! That's alot of concrete ! That truck is really good articulation , I'm building on a rear steer Capra right now , that thing is gonna twist bind over everything ,😂
Sway bars. The rear for sure, and if you still have to much tourqe twist throw some on the front axle as well
@@thomasgross8289 I didn't think motor on axle would have torque twist
@@brandonwilliams2431 what truck has moa? The capra?
K,, thanx much guys
Cool cool enjoyed it on the rocks 💯
Just seen on outsourced rc Jconcepts fling kings for lmt/maxx. You need them good sir!!!!
Amazing what quality foam and weight will do. You're even using your cheap trucks just to see lol
I wonder if you could put those little revolvers on it?
Hey how has ur day been going. Can you use the stock recivers or no?????
Try the ridge runner axles moa portals and metal gear upgradable
U need to get a temper gen 2.. please!! And make one like I was showing u..maybe put some wheel weights inside the front wheels..
I'm going to watch the video well~^^
👍😁
redcat everest 10 axels maybe? I've never had one so idk how good they turn.
Will bully V2 competition crawler front and rear axels fit on this ridgerock?
Great rc, I want this one👍🏾 Exocaged, I have a question when you get a chance, which 1100kv motor has more torque in your opinion, Hobbywing or Castle or do you like the 1650kv better?
Do you have 2 escs on your ridgerock or just one
What was up with the back tires not moving ?
It's on purpose. Its called a rear 'dig'. Its a feature where you can disable the rear wheel drive to help make tighter turns
i just ordered the coolest wheels (i love skulls) hobbysoul Ghost 2.2 beadlocks and a set of 2.2 xl mud slingers for my integy 2.2 rock crawler that i have super extended with 1.50 inch longer 4 link front and back . i used to use jr racing for my servos what happened to them (jr) ?
Are you using stock controller with the dual escs? If so how and if not how do you get crawl and all without it?
YOU HAVE MORE MONEY IN WHEELS AND TIRES THAN THE TRUCK RTR. THE DRIVE CUPS AND STUB AXLES BRAKE THE PLASTIC TO EASILY TO ADD ANYTHING MORE. I AM STILL WAITING ON PARTS ORDERED LAST YEAR MYSELF FOR THIS REASON. OTHER THAN THAN, IT IS HARD TO BEAT FOR THE MONEY.
Are you using the original controller and what transmitter do you have with your new ESCs? Thanks!
I can’t find the 1.9 ruptures anywhere!?
What remote are you running?
I suppose those 4.9 inch tyres wouldn't be helping gearing. Great video
There's no aftermarket gears, I think it's just a generic unit that Redcat rebrand. The Facebook group has some folks investigating but small run fabrication is expensive.
I always wanted a "bouncer" but never got around to it, might build one of those rigs. I don't have much rock...just the odd riprap here n there but that's not really rock crawling, just going over a rock...one at a time lol. But I do have a huge...50ish acer washed out pond full of slopes, plato's, and ravines cut from water run off. The terain is redclay and pine straw...lots of it, the challenges on navigating the terrain vary greatly depending on how wet it is, dog days of summer the clay is hard as hammerd cat poo and dusty, actually harder to climb then when its wet, a rig like this would be fun there..like 1/1 hill climbs. My trail trucks usually lack the wheel speed to totally conquer the hills, which leads to alternate routes, but yea bouncer country lol
Does great on dirt hills and trails with 2.2s and lowered.
ruclips.net/p/PLer2XVHGeQIAXwwr_8wRrhP4fbJOrycOx
My modded Ridgerock playlist
been loving the danchee material lately 👌. thought it was gonna be a shelf queen. not too impressed with stock ( except the price was amazing ) that being said your mods are killer keep them coming maybe some aluminum hubs would be sweet. just wondering if I missed it. if not could you go over or maybe put link in for your transmitter again I love the dig. it's a must for me now. lol that temp dig is 🤯.
Those gears will be fried in no time..
Thanks to your recomendations i bought and made a spanish video from the rooster 2.8 tires
ruclips.net/video/T35CrUy-uJ8/видео.html