DIY: Homemade Dremel Cork Drum Sanders
HTML-код
- Опубликовано: 4 окт 2024
- Very practical, incredible easy and very durable, you can use different abrasive paper grits.
You just need:
Dremel or any other rotary tool.
Sandpaper similar to the one that i used.
Wood glue.
Plastic pipe (i used 16mm)
Painting/paper tape
Cork !!
Very easy and cheap to do, this is an updated version of the first video that i did 3 years ago ;)
Music list:
[No Copyright Music] Dream to live - ZAYFALL
Music removed because it´s not free anymore....
(Homemade project woodworking sanding bands tool, mandrel accessory, useful bit for drill, Start to finish full video)
#DTekDIY
![🤫 TRICK YOU DIDN'T KNOW ► How to make HOMEMADE SANDPAPER for DREMEL [ALL SIZES]](http://i.ytimg.com/vi/bnOx0kgmwDA/mqdefault.jpg)
![Eminem - Temporary (feat. Skylar Grey) [Official Music Video]](http://i.ytimg.com/vi/ZaK9Wi5ho0o/mqdefault.jpg)
Excellent. Thank you. I also love videos without any talking, where the instruction is all visual. Well done!
Found your video using Pinterest, but I couldn't leave a message there, so I searched you on RUclips.
I have to say thank you, because it didn't occur to me to wrap the Sandpaper around using a long strip. Thats brilliant, and a no brainer, but I would have just done it the way I always do. Which is cutting a rectangular piece of sandpaper, and gluing it on a dowel.
Your way is ten times more efficient, and effective.
Guess I'll just have to subscribe, and stop wasting my time on less efficient ways of doing things. 😅
Thank You for posting, and sharing your genius. I appreciate you.
I hadn't watched the whole video, when I wrote my comment. Oh my goodness the cork idea with any tube is spectacularly clever. Obviously you just find a new cork. I bet those fake corks would be even better-Discuss.🤪Stole that from Cinemasins.
I think I'm in love❤😜
thanks, glad you liked :) , in fact this is a new version of my first video that i did for this channel 8 years ago but on that video while i was editing the video i forgot to put the video part where i wrap the tape around the pipe, a few years after that i did this new video :)
@@DTeK I edited the spelling mistakes I hope out of my comment. I tried to shorten it but I talk too much in life as well. 🤪😜
@@DTeK if I promise to keep my questions short may I ask your permission to ask you some questions?
You answered me right away which shows me your courteous. Plus you did a second video 8 years later, to fix what you thought was a mistake. That shows me that you have a heart. I bet that was bothering you.
I'm a woman, and believe me I know what its like to patronized to. Im Never taken seriously which means I'll rarely get good advice. I get, and I'm not lying.
"Oh honey that's to hard", "Get your husband to do it, you could hurt yourself". Or my favorite, the no answer at all with a pat on my shoulder. Touch me again, and I'll show you my extensive set of very sharp chisels.
I'm no carpenter like both my grandfathers, my dad, and my uncle who is the grand Grand Poobah of carpenters, but I'm not half bad.
If my wife saw me using a razor knife to cut sandpaper on her table that looked like that, this would be my last post . Ever
ha ha ;)
awesome !!! i was going to use extra strong glue, didn't expect it will work with wood glue ! great video thx
Yes, wood glue works if you use "painters tape", when it dryes it "fuses" to the paper grit.
Absolutely brilliant. So simple but so clever. I’ll start doing some later 👍
I uploaded a similar video 3 years ago and re-ploaded this one a few months ago, i use this diy sanding drums all the time ;)
DTeK well I needed some fine grade paper to do the hard to reach places on my motorcycle casings and you can’t get them over 600 I think and then you have to wait because they come from China
Super helpful to heck my little cheap manicure tool to sand my nails for fake nails! :D My good drill is too fast for that. Huge thanks from Hungary,EU! :)
Thanks :)
Cork is brilliant.
that methiod of getting a spiral cut is very smart!
Thanks, it was very helpful since I was running out of drum sanders!
Nice! Thanks for the tip, simple yet useful!
For dremel we can buy it however. But bigger, for drills etc are hard to find. I am going to make bigger ones becouse can't find it
My tention is free when I see your vidio tq
Fantastic idea.
thanks
THANKS .from Argentina
Very useful, thanks
Best I’ve seen
Powerful idea, great job!
Simple and effective
Great video thanks
Nice work
Show de aula!!! Parabéns, ganhou meu like e a minha inscrição.
Obrigado ;)
Thanks,it’s very useful. Cheers!
Well done!
For people asking about the pvc pipe diameter: he has to sand the cork (which is 24/25 mm diameter) so it all depends on how much you sand it down.
E.g: Lets say you have a 25 mm cork and sand 5mm off from it, your pvc pipe needs to be 20mm.
This explanation sounds kinda silly but since I see so many people asking the same...
in this case i used 16mm pvc pipe, the cork just need to be sanded a little bit bigger than the inner diameter of the pvc pipe for a tight fit, thank you for your reply :)
Great work ! i like your channel :)
amazing idea.
thanks
Sandpaper works sooooooo well with glue smeared all over it dude! Such attention to detail....bet you make some reeeeeeal quality stuff from what that video just showed
Tell everyone you're a karen without telling everyone you're a Karen. What a loser.
They have sanding attachments for that
nice
nice.
This was a great video ... up to a point. It didn't show how you got the dowel out of the band of sandpaper since the dowel had tape the sandpaper was glued to the tape???. What was the thing attached to the cork?
Thanks, i don´t remove anything, the plastic pipe is part of the "drum sander", i just cut it in smaller pieces and the smaller pieces will fit in the "cork attachement" has you can see in the final part of the video.
@@DTeK Thanks for this. I thought the plastic pipe was a solid wooden dowel!
Only the paper-based skin will wear out quickly. Must be used on fabric.
it doesn´t wear, it remains glued
They miraculously fell off the dowel back stage, can't believe the rod easily came out - if it had you'd have shown its removal
Saya salut kreatif
What is the size of the plastic tube? And where can i find it?
Can we use this for metals??
Did you remove the wrap from the pipe before cutting ?
no, the plastic pipe is part of the drum sanders.
What is the core? That you wrapped the tape over?
It´s a plastic pipe used in electrical wiring.
@@DTeK what the dia size of plastic pipe please my dear?
but wont getting the glue on the sandpaper (rough side) soften it?
Its a minimum amount of glue where the sides of the sand paper are touching, it doesn´t affect it.
@@DTeK ok thanks. i made my sanders 2hrs ago, thank you for the video
How do you get sandpaper which is thicker and will last longer while sanding?
Store
How u remove the wood inside the sandpaper?
the wood? i used cork
What a glue name ?
it is wood glue
На какое основание клеили скотч ?
couldn't you just sand the pvc pipe to roughen it instead of taping over it?
No because the wood glue will not stick, but if you use another tipe of glue it will work, i choose the wood glue and the painters tape because they are super cheap.
What is the number (grit #) of sanding paper you used in the video
80 grit
is the superglue in the cork working?
The cork is not glued, its only used to atach the sanding drum
@@DTeK I means this: 1:23
@@luter82 sorry, yes its working, i use it often and after 1 year its holding fine.
@@DTeK oh great, Thanks!
😃N😃 i 😃C😃
What size plastic pipe
12mm in diameter
молодец)леруа мерлен и dexter тебя спалил)))
Забивать абразивный слой клеем???Да тебе премию Дарвина надо выдавать!!!
Yep, coppying that one...
Take your gloves off, if they get caught is not fun, never wear gloves with spinning tools
Maybe with high power tools, this is a 170 w dremmel that i use always at low speeds using around 30/40w.
ا
This is absolute not working!
it works, i use the same method 5 years later, tell me what is not working and i tell you what are you doing wrong ;)
Nice but I find it not very dependable seeing how no clue to keep the cork from doing its intentions without spinning also??
Pressure fit ;)