I would connect the AIO fans to the CPU fan header and the pump to the pump header (both near or usually above the RAM) and the case fans to a system fan header on the motherboard (mine are along the bottom of the MB)
@@randomunblocks So I just used the case to build a new PC as well and used the motherboard bios to adjust the speed, no issues at all. Make sure that you plug the fan hub in the 4pin PWM header of the mobo.
@@HardwareSense can i get your phone number so that I can send pictures of the 4 pin connecter, since I have a b760 gaming plus wifi and plugged the 4 pin into system fan 1 fully seated and it gets recognized, maybe should I bye another 4 pin connect???????
I plugged the fan cable into a sys fan header, and the RGB one into one of the RGB headers on my motherboard. But when I use the LED button on the case, nothing happens. Did I do something wrong or is it just busted on my case?
the LED button on the case should attach to the hub to control the fan cables and rgb cables coming out of it, i think it was a 2pin connector at the top?
I made custom filters for the front and left base and for the right side panel from what I see when I when clean them I recommend them.
Can you use a splitter to add the aio to the fan controller?
I would connect the AIO fans to the CPU fan header and the pump to the pump header (both near or usually above the RAM) and the case fans to a system fan header on the motherboard (mine are along the bottom of the MB)
And thiiiiis is a real review.
got this case how do I change the fan speed, I set the fan speed in bios but it don't change
@@randomunblocks So I just used the case to build a new PC as well and used the motherboard bios to adjust the speed, no issues at all. Make sure that you plug the fan hub in the 4pin PWM header of the mobo.
@@HardwareSense can i get your phone number so that I can send pictures of the 4 pin connecter, since I have a b760 gaming plus wifi and plugged the 4 pin into system fan 1 fully seated and it gets recognized, maybe should I bye another 4 pin connect???????
I plugged the fan cable into a sys fan header, and the RGB one into one of the RGB headers on my motherboard. But when I use the LED button on the case, nothing happens.
Did I do something wrong or is it just busted on my case?
@@lol-w4r Are you able to control them with your motherboard software?
@@HardwareSense yep. But I was hoping to do it with the button cuz I'd prefer to not have to use the software
@@lol-w4r Check your connections again, I know that the RGB is tricky, especially the 5v one with only 3 flimsy pins
@@HardwareSense will check when I get home from work. Thanks!
the LED button on the case should attach to the hub to control the fan cables and rgb cables coming out of it, i think it was a 2pin connector at the top?
what is the size for a power supply
@@nolol7034 Technically, you can use even the longest PSU, if you remove the HDD cage.
where do i connect the 4 pin thats connected to the 3 pin for the fans
@@TazMicoHD The 4 pin coming from the hub needs to be plugged in to Motherboard 4 Pin header
@@HardwareSense the names on my mobo are different from others (rog strix b550-f gaming wifi II) is it the cha_fan?
@@TazMicoHD Yes, it has to have 4 pin, can be sys_fan, or chas_fan or anything on that matter
@@HardwareSense alright thank you! 🙏🏾