thx for the video. In the holes to anchor to the wall (1:35), do you use some type of bushes to reinforce? I did a test with a low quality wood and the screw broke it, I think I had to install some zinc-coated iron bushes to reinforce it.
well i tried to use pure epoxy that i color myself that's why! i just wanted to know, where do you get your aluminium oxide sand ? mine isn't as shinny as yours. i don't know how to get those shinny grains on my last coat?
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
best...Thank for sharing...
אדיר!😍
Hey a technical question - what's the grain size for aluminium oxide? thank You
I've heard that 60 grit is good, I am going to try 180 grit out because it's what was available
I use 80 or 90 grit, i used 60 grit once but found it too coarse and dangerous for the skin
thx for the video. In the holes to anchor to the wall (1:35), do you use some type of bushes to reinforce? I did a test with a low quality wood and the screw broke it, I think I had to install some zinc-coated iron bushes to reinforce it.
Yes. I use These: escapeclimbing.com/collections/hardware/products/volume-screw-insert
Great!
what screws do you use to hold the seams together?
Usually 40-50X4mm wood screws.
Do you dilute the epoxy paint alot ?
This one I mix with ~20% thinner, but sometimes I use Polyurethane Lacquer that is much thinner and needs no dilution at all.
well i tried to use pure epoxy that i color myself that's why!
i just wanted to know, where do you get your aluminium oxide sand ? mine isn't as shinny as yours. i don't know how to get those shinny grains on my last coat?
@@VengaClimbingGym are you here ?
@@KayzImagine Which paint do you use?
dude, what kind of paint did you use?
Did you ever figure out what paint to use?