lol, same, i broke on my first day of use out in the lake so i had to use my paddle to turn it but once i got bk home from camping at the lake i also replaced the lines with bike brake cables.
Check out my 3 year review. I replaced the steering system and the rudder. That stock handle is crap and only a matter of time before you break it again. I was replacing wires ever month or two and got tired of it. ruclips.net/video/mIu4dzip39M/видео.html
Mine broke also in 3 months. I've been taking to the riot company for almost 2 months to get a replacement cable. Unfortunately I didn't have my receipt cause I hid it from my wife so we'll I couldn't find it. We'll I even told the company I would pay for the cables but still didn't get any good reply. Thanks for the great idea for a fix. And like you said in your video the steering worked alot better after the fix.. Terrible customer service from Riot.. Much appreciated Sir.
Glad I could help you. If you have trouble with that barrel connector holding the wire go to home depot and get these ferrule and stops ($1.17). They work a lot better than those. www.homedepot.com/p/Everbilt-1-16-in-Aluminum-Ferrule-and-Stop-Set-43274/205883075
Yeah I have done it 4 times in the year that I have owned it. I just redid it. Next time I plan on using some 200 lb downrigger line. I have heard people are having better success with that.
@@PeelingLine you can try bigger wires. It'll last a little longer. Hopefully to upgrade to higher end kayaks soon so I won't have to deal with it so much. Good luck
@@fishoclock4851 I am not sure that would solve it. The problem I notice is that one of the outer wires will break and then start adding friction in that area. This may be solved with better bearings where the line goes from the handle into the wire tubes.
I'm glad the company reached you. I don't have one of these kayaks but I'll bet you can secure your seat more by running the tag end of the seat strap back through to the back again. At the 2:45 on your video. I have used similar straps with music instrument cases and that seems to secure it more. Good luck.
I had the same problem with my Titan - Steering Cable BROKE - about 2 miles from shore...! I replaced the S/S Cable with 660# Kite String (I used to Kite Surf, and had it left over), kinda "re-did" my steering handle, and extended the rudder... That was 2-1/2 years ago, and haven't had any problems since! Thanks for this review, as it gives everyone an "insight" as to what to look for in an inexpensive 'Yak, and how to repair it. (Next time I get $4,200 just "sitting around", I'm going for the Hobie PA-14...) Haha!
OUCH! Hope you had an oar. I guess steering with your hands dragging in the water isn't too bad though. I have seen that hobbies steering breaks too. They just use the string but I don't think it is as strong as your kite string. From what I have seen it is people upgrading their rudder to the bigger ones that strains the string and breaks it. I will probably try that string if my steering goes again. What did you do to your steering handle? I find it strains my wrist a little when I go out all day.
@@PeelingLine On the Titan, the cable was held by a little "grub-screw" fitting, at the handle (that's where it broke, and I had to reach all the way back and grab the rudder control, behind me!...can you spell "Twisted Back", for over an hour?). Haha! As soon as I get some time on my buddy's mill, I plan on making a rudder with a spring-loaded "kick-up" (longer, wider, and down deeper into the water - as Titans are "notorious" for "wandering off course"!). The extension I have now is just a plastic dollar store "add on", to the original rudder - but it helps (I used S/S Rivets with back-up washers, so they wouldn't corrode!). The "Kite String" I used says 320 Kg. , and I haven't had any problems with it. (I also "re-did" the rudder top, making a half-pulley assy. to add to it. Rudder now goes 180 degrees, and I can nearly "pivot"). Haha! A lot easier to steer and stay straight, also.
@@MSmith-jf5wo I have had to do it and know the feeling but not for an hour. Might have to do the same with the pulleys. Reducing the turning radius would be nice.
That's unbelievably bad customer service, but it looks like you found some ways to work around the issues. I'm currently in the market for a kayak and appreciate hearing this information.
I was seriously going today to Sportsman’s Warehouse to get the 12 for me and 10 for my wife. And I thought I would double check on here to see if theres any quality issues and wow! You just saved me a bunch of money, Thanks!!!! I want Old Town kayaks but there backordered til May, but I guess we’ll wait! Thanks again for this video!
When I got this one last summer there was literally nothing else available. I had to drive an hour just to get this one. The old towns didn't come back into stock until the winter. I guess because of covid there wasn't much to do besides go outside and everyone was buying kayaks.
Thanks for the video. Very informative. Looking at a bunch of different models/pricing. Kissed off Hobie.........somewhat focusing on Old Town but hoping one of these more "favorabley-priced" models will work. My rationale is the same.........Save on the boat, spend it on the electronics. Spending $3,500-$4,000 on boat and misc. accessories is a killer. Wife says "Do it" but pulling the trigger isn't easy.
It is a tough call. I had the intention of selling the kayak after a year and buying a boat but circumstances change. I find it is wise to listen to your wife.
nice video on the cable fix! thanks! I can see a problem you may encounter, I didn't have the cable problem, but that screw that goes through the steering lever: It will tighten down when you steer leaving you with a frozen rudder out in the sea. You probably need to get a new nylon coated nut, then use some loctite (blue) on that screw & nut when you tighten it.(thanks to the fellow mako rider on fb that gave me this advice)
Thank-you. I got around that by cutting away some of the plastic on the under side where the nut is. But thank-you, if I do encounter that I know what to do. And hopefully, it isn't out at sea.
Thanks but it doesn't fix it permanently. You have to replace them depending how often you use your kayak and salt or fresh water. I have a new steering kit I bought I will try out and see if it is better and make a video also with some other upgrades so stay tuned for that. I put a link at the bottom for the cables they're a buck a piece and I get the 8 pack of ferrules at home depot. www.amazon.com/dp/B01EJRZJ32/ref=sspa_dk_detail_5?psc=1&pd_rd_i=B01EJRZJ32&pd_rd_w=6sTGG&content-id=amzn1.sym.386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_p=386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_r=T0CGCFJT3XC3MH4HEMCQ&pd_rd_wg=NaiOh&pd_rd_r=bb61f5c9-6d02-431f-8fbb-eef3ac4ed8c0&s=hi&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE2WjlLSDNSQktWMUYmZW5jcnlwdGVkSWQ9QTA5NDc4OTQxUlVTWllBNzRPMjAmZW5jcnlwdGVkQWRJZD1BMDUxODMwNDFNQktRU0EwQjRSODcmd2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWMmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
Man that stinks, and they did not even get back to you on it. I am like a mod fix it type of guy... Have some pointers for you... When you put those cables in you should coat them with a grease so they slide easy though the passageways of the cables and stuff. Now you can also use some thin oil and drip a some down each end that a cable comes out from the cable outside casing or component and the oil should work it's way down the cable and also make it more slippery and not rust and last longer I used to ride freestyle bikes until I was 30 years old and then mountain bikes I always used thin oil down the cables it works great . another thing the seat clamp you could probably go around that clip once you have it adjusted the way you like with some gorilla tape or put a zip tie around it so it can't flip and delatch? ... Hope this helps ya bud. 👍at least you got it all fixed up and made this video to let others know of these problems.
Good idea with the zip ties. I probably should do the oil or grease on those wires. One time on the salt and they will definitely rust out. Thanks for the tips.
@@PeelingLine Your welcome, I recommend this it's the best stuff you will start using it for everything. spray all the cables or down in there openings, or spray some in a cup and drip the oil down them so you don't waste it as much. www.amazon.com/Corrosion-X-90101-6oz-Aerosol/dp/B0009E3T6E/ref=sr_1_2?dchild=1&gclid=Cj0KCQjwk8b7BRCaARIsAARRTL49aZKTyRA1Sx0KMIcfWRaLjs_GQP73qA3LuKCf-x5wVcInDFNp1IwaAkUMEALw_wcB&hvadid=409928399196&hvdev=c&hvlocphy=9003612&hvnetw=g&hvqmt=e&hvrand=7612619265887335570&hvtargid=kwd-38282708499&hydadcr=1613_11255918&keywords=corrosion+x+spray&qid=1601340001&sr=8-2&tag=googhydr-20
@@PeelingLine Cool, it's good stuff I use it on everything, it's not like wd40 this stuff actually is a good lubricant also and fights corrosion way better than anything I ever used.
The steering cables on the Hobie are nylon I'm pretty sure. Not metal wire cables like those. I think they break from time to time too. You did a great job fixing yours. It's a shame you had to though. Kinda poor customer service if they won't respond back to warranty claims. That's gotta be very disappointing.
I have looked at the hobies and think I may try the string if this doesn't work out. There may be less friction with the string and the steering could be better. Someone from the company did call me back finally but it was 5 minutes before they closed on Friday and I wasn't able to take the call.
Dude, that's a bum steer (no pun intended). It's a good thing you're obviously a very capable and handy person; you did an awesome job fixing it. Personally, however, I don't think you should have had to do that, and I'm not thrilled that Riot gave you the runaround. Let the customer do the repairs is a BS cop-out imo. Hopefully this is the last of your issues, but if you ever do get another pedal drive I think you're right about the hobie; although there are some really good ones out there that won't break the bank from Wilderness, etc. Tight lines.
Yeah they rust and break. I have done it twice and about to do it a third time. It doesn't take long but I think next time I will try with some downrigger line which is nylon. I think the salt water is brutal on anything metal. They did get back to me. They offered to pay for the costs. It didn't cost anything for the cables so I said don't bother.
@@PeelingLine Thanks for the quick response! Same thing happened to me in the similar time frame. I've purchased bicycle cables and will anticipate future repairs.
@@phengxiong8843 They are the cheaper solution. Also check these out at home depot. They're just over a buck and work better for binding the cables at the back. www.homedepot.com/p/Everbilt-1-16-in-Aluminum-Ferrule-and-Stop-Set-43274/205883075
It's great besides the steering issue. That seems to be resolved now. The price is a lot better so it would be hard to beat it. The hobbies also have issues with their steering breaking too. So for the price I would say go for it. If you are looking to resell it in a year or two I would go for the hobbie.
You did an amazing job my Man! That’s why I never pay a warranty for anything, if they can give me some for free it’s all I get Yeah looks like it’s gonna work good for a while 👍
Sorry to hear, I had the gen one rudder system. Yes, I heard others complain that they are not responding to any messages. Don't think i would recommend anyone to buy anything from RIOT.
Bummer. Well there's the reason why they are the cheapest pedal kayak in your market. Very good job on those repairs tho, hope you can get out again to try it soon !
Dang that's a bummer about the kayak, especially the company not getting back to you. I might gripe about the prices of Hobie's but so far my steering has held up over 3 years now, and they aren't even steal cables
Nice fix on the cables. I've never had a problem with my Slayer (owned it for over 5 years now) but I've seen people having to replace their cables after they upgraded their rudders and it put too much torque on the cables and broke them. Slayer has switched to using cord now instead of metal cables. Really crappy about the customer service. I can't stand companies that blow you off like that.
Man that sucks you had to repair that yourself and they couldn’t get back to your claim. Shame on them. Thanks for uploading this, you may have saved someone else from this issue
Hi, i saw this and reached out to you personally about 10 days ago on the address you have posted there to adress your issue. I also could not find anything on any of our internal systems that track such requests. Not sure what is going on but let us know how to reach you and we will make it right. Best regards. Riot
You answered and sent me a replacement for a defective steering mechanism I had after purchasing a Mako 10. But now the replacement part cables broke . I have sent in multiple warranty claims and emails and have left VM and I have not heard back from anyone, my first claim was submitted April 3 2021 it is now May 2 2021! I DEFINATELY DO NOT RECOMMEND Riot to anyone!!!
Hopefully that smaller gauge wire doesnt bind up on you and it lasts for awhile 👍. Hate fixing new things..but atleast it's got nice stickers on it 😉. Good review. Think my big ass would break that seat ..Haha
Thanks. Not much I can do about it. The store wont take it back so I have to fix it. I think big guys have used it but the problem for them was it tipping.
@@PeelingLine probably so being high up. I got my pontoon so I'm unsinkable! Unless someone pops it Haha. Havnt gotten to use it much but I plan to! Be safe out on the water dude
Looks like that kayak company has left you high and dry. While you could only make a right, the kayak company made a left, haha. Glad you were able to make it functional again.
Look at them arms!!! Hahhh know wonder you broke the cables.. Ypur a bully to steel!!!! Hahhhh jking!!!! Dang yea. Everytime you have a review about that jawn its like walking down beat street!!!
Thats bad customer service by Riot. Good to get the word out, cuz we wont buy their products. At least you will not be spinning in circles with a stuck rudder. 🤣 Nice DIY fix, Peeling Line❗️
![How To Re-Enter A Kayak In Deep Water [Standard & Trick Method]](http://i.ytimg.com/vi/hnGjPUfOyvc/mqdefault.jpg)
Awesome! Same thing happened to my steering.Thanks!
lol, same, i broke on my first day of use out in the lake so i had to use my paddle to turn it but once i got bk home from camping at the lake i also replaced the lines with bike brake cables.
Check out my 3 year review. I replaced the steering system and the rudder. That stock handle is crap and only a matter of time before you break it again. I was replacing wires ever month or two and got tired of it. ruclips.net/video/mIu4dzip39M/видео.html
Mine broke also in 3 months. I've been taking to the riot company for almost 2 months to get a replacement cable. Unfortunately I didn't have my receipt cause I hid it from my wife so we'll I couldn't find it. We'll I even told the company I would pay for the cables but still didn't get any good reply.
Thanks for the great idea for a fix. And like you said in your video the steering worked alot better after the fix.. Terrible customer service from Riot.. Much appreciated Sir.
Glad I could help you. If you have trouble with that barrel connector holding the wire go to home depot and get these ferrule and stops ($1.17). They work a lot better than those. www.homedepot.com/p/Everbilt-1-16-in-Aluminum-Ferrule-and-Stop-Set-43274/205883075
Yes it's exactly how mine was too. The rudder wires kept fraying on the tension knob. So it would break. I've replaced mine every 2 to 3 months.
Yeah I have done it 4 times in the year that I have owned it. I just redid it. Next time I plan on using some 200 lb downrigger line. I have heard people are having better success with that.
@@PeelingLine you can try bigger wires. It'll last a little longer. Hopefully to upgrade to higher end kayaks soon so I won't have to deal with it so much. Good luck
@@fishoclock4851 I am not sure that would solve it. The problem I notice is that one of the outer wires will break and then start adding friction in that area. This may be solved with better bearings where the line goes from the handle into the wire tubes.
I'm glad the company reached you. I don't have one of these kayaks but I'll bet you can secure your seat more by running the tag end of the seat strap back through to the back again. At the 2:45 on your video. I have used similar straps with music instrument cases and that seems to secure it more. Good luck.
Thanks that is a good idea I will give it a try.
I had the same problem with my Titan - Steering Cable BROKE - about 2 miles from shore...! I replaced the S/S Cable with 660# Kite String (I used to Kite Surf, and had it left over), kinda "re-did" my steering handle, and extended the rudder... That was 2-1/2 years ago, and haven't had any problems since!
Thanks for this review, as it gives everyone an "insight" as to what to look for in an inexpensive 'Yak, and how to repair it. (Next time I get $4,200 just "sitting around", I'm going for the Hobie PA-14...) Haha!
OUCH! Hope you had an oar. I guess steering with your hands dragging in the water isn't too bad though. I have seen that hobbies steering breaks too. They just use the string but I don't think it is as strong as your kite string. From what I have seen it is people upgrading their rudder to the bigger ones that strains the string and breaks it. I will probably try that string if my steering goes again. What did you do to your steering handle? I find it strains my wrist a little when I go out all day.
@@PeelingLine On the Titan, the cable was held by a little "grub-screw" fitting, at the handle (that's where it broke, and I had to reach all the way back and grab the rudder control, behind me!...can you spell "Twisted Back", for over an hour?). Haha!
As soon as I get some time on my buddy's mill, I plan on making a rudder with a spring-loaded "kick-up" (longer, wider, and down deeper into the water - as Titans are "notorious" for "wandering off course"!). The extension I have now is just a plastic dollar store "add on", to the original rudder - but it helps (I used S/S Rivets with back-up washers, so they wouldn't corrode!).
The "Kite String" I used says 320 Kg. , and I haven't had any problems with it. (I also "re-did" the rudder top, making a half-pulley assy. to add to it. Rudder now goes 180 degrees, and I can nearly "pivot"). Haha! A lot easier to steer and stay straight, also.
@@MSmith-jf5wo I have had to do it and know the feeling but not for an hour. Might have to do the same with the pulleys. Reducing the turning radius would be nice.
My pedal fell off both sides on my pedal drive right now drilling a hole in the pedal to run a bolt through it. It's stainless steel in aluminum
That sucks. My drive is starting to go.
To bad the customer service sucks but at least you were able to fix it and get out again ! Thanks for sharing the repair process
Still have to get out. Hoping tomorrow though.
That's unbelievably bad customer service, but it looks like you found some ways to work around the issues. I'm currently in the market for a kayak and appreciate hearing this information.
For sure. You looking for a pedal kayak? I would say go for a hobbie. I may just put a trolling motor on here.
Yes, looking for a pedal kayak and hobie is the front runner. Will probably be happier in the long run to spend a little more money now.
@@fatherandsonsfishing Probably, you can always upgrade electronics. I planned on getting a boat and so got better electronics for that.
Sad that they don't have better customer service; seemed like a very routine call. Your fix was both ingenious and inexpensive--kudos!
Thank-you.
Sucks that your steering cable broke after 3 months. Very cool that you were able to repair it yourself. Having the extra cables may come in handy.
Yeah it is. The replacement is holding up well.
Glad you could fix it! sucks that the company didn't get back to you!
Sure was.
I was seriously going today to Sportsman’s Warehouse to get the 12 for me and 10 for my wife. And I thought I would double check on here to see if theres any quality issues and wow! You just saved me a bunch of money, Thanks!!!! I want Old Town kayaks but there backordered til May, but I guess we’ll wait! Thanks again for this video!
When I got this one last summer there was literally nothing else available. I had to drive an hour just to get this one. The old towns didn't come back into stock until the winter. I guess because of covid there wasn't much to do besides go outside and everyone was buying kayaks.
Thanks for the video. Very informative. Looking at a bunch of different models/pricing. Kissed off Hobie.........somewhat focusing on Old Town but hoping one of these more "favorabley-priced" models will work. My rationale is the same.........Save on the boat, spend it on the electronics. Spending $3,500-$4,000 on boat and misc. accessories is a killer. Wife says "Do it" but pulling the trigger isn't easy.
It is a tough call. I had the intention of selling the kayak after a year and buying a boat but circumstances change. I find it is wise to listen to your wife.
nice video on the cable fix! thanks! I can see a problem you may encounter, I didn't have the cable problem, but that screw that goes through the steering lever: It will tighten down when you steer leaving you with a frozen rudder out in the sea. You probably need to get a new nylon coated nut, then use some loctite (blue) on that screw & nut when you tighten it.(thanks to the fellow mako rider on fb that gave me this advice)
Thank-you. I got around that by cutting away some of the plastic on the under side where the nut is. But thank-you, if I do encounter that I know what to do. And hopefully, it isn't out at sea.
Great review. Not interested in a kayak at the moment but it’s good to see legit, honest reviews.
Thank-you. Avoid this company when you are.
Great job fixing the steering. Can you share the link for the cables from Amazon? Thanks.
Thanks but it doesn't fix it permanently. You have to replace them depending how often you use your kayak and salt or fresh water. I have a new steering kit I bought I will try out and see if it is better and make a video also with some other upgrades so stay tuned for that. I put a link at the bottom for the cables they're a buck a piece and I get the 8 pack of ferrules at home depot. www.amazon.com/dp/B01EJRZJ32/ref=sspa_dk_detail_5?psc=1&pd_rd_i=B01EJRZJ32&pd_rd_w=6sTGG&content-id=amzn1.sym.386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_p=386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_r=T0CGCFJT3XC3MH4HEMCQ&pd_rd_wg=NaiOh&pd_rd_r=bb61f5c9-6d02-431f-8fbb-eef3ac4ed8c0&s=hi&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE2WjlLSDNSQktWMUYmZW5jcnlwdGVkSWQ9QTA5NDc4OTQxUlVTWllBNzRPMjAmZW5jcnlwdGVkQWRJZD1BMDUxODMwNDFNQktRU0EwQjRSODcmd2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWMmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
Man that stinks, and they did not even get back to you on it. I am like a mod fix it type of guy... Have some pointers for you... When you put those cables in you should coat them with a grease so they slide easy though the passageways of the cables and stuff. Now you can also use some thin oil and drip a some down each end that a cable comes out from the cable outside casing or component and the oil should work it's way down the cable and also make it more slippery and not rust and last longer I used to ride freestyle bikes until I was 30 years old and then mountain bikes I always used thin oil down the cables it works great . another thing the seat clamp you could probably go around that clip once you have it adjusted the way you like with some gorilla tape or put a zip tie around it so it can't flip and delatch? ... Hope this helps ya bud. 👍at least you got it all fixed up and made this video to let others know of these problems.
Good idea with the zip ties. I probably should do the oil or grease on those wires. One time on the salt and they will definitely rust out. Thanks for the tips.
@@PeelingLine Your welcome, I recommend this it's the best stuff you will start using it for everything. spray all the cables or down in there openings, or spray some in a cup and drip the oil down them so you don't waste it as much. www.amazon.com/Corrosion-X-90101-6oz-Aerosol/dp/B0009E3T6E/ref=sr_1_2?dchild=1&gclid=Cj0KCQjwk8b7BRCaARIsAARRTL49aZKTyRA1Sx0KMIcfWRaLjs_GQP73qA3LuKCf-x5wVcInDFNp1IwaAkUMEALw_wcB&hvadid=409928399196&hvdev=c&hvlocphy=9003612&hvnetw=g&hvqmt=e&hvrand=7612619265887335570&hvtargid=kwd-38282708499&hydadcr=1613_11255918&keywords=corrosion+x+spray&qid=1601340001&sr=8-2&tag=googhydr-20
@@PHFishingBiking I just ordered some. I have so much stuff rusting now that I fish the ocean.
@@PeelingLine Cool, it's good stuff I use it on everything, it's not like wd40 this stuff actually is a good lubricant also and fights corrosion way better than anything I ever used.
The steering cables on the Hobie are nylon I'm pretty sure. Not metal wire cables like those. I think they break from time to time too. You did a great job fixing yours. It's a shame you had to though. Kinda poor customer service if they won't respond back to warranty claims. That's gotta be very disappointing.
I have looked at the hobies and think I may try the string if this doesn't work out. There may be less friction with the string and the steering could be better. Someone from the company did call me back finally but it was 5 minutes before they closed on Friday and I wasn't able to take the call.
Its to bad that you had problems already. I wouldn't buy that brand again especially with lousy customer service. Good review!👍👍
Yes I agree
Dude, that's a bum steer (no pun intended). It's a good thing you're obviously a very capable and handy person; you did an awesome job fixing it. Personally, however, I don't think you should have had to do that, and I'm not thrilled that Riot gave you the runaround. Let the customer do the repairs is a BS cop-out imo. Hopefully this is the last of your issues, but if you ever do get another pedal drive I think you're right about the hobie; although there are some really good ones out there that won't break the bank from Wilderness, etc. Tight lines.
I wouldn't mind doing the repairs if they sent a replacement part. Probably costs them nothing for the wire if I can get a bag full for $5.
Have you had to replace the bicycle cables since this video? What was the result when Riot responded?
Yeah they rust and break. I have done it twice and about to do it a third time. It doesn't take long but I think next time I will try with some downrigger line which is nylon. I think the salt water is brutal on anything metal.
They did get back to me. They offered to pay for the costs. It didn't cost anything for the cables so I said don't bother.
@@PeelingLine Thanks for the quick response! Same thing happened to me in the similar time frame. I've purchased bicycle cables and will anticipate future repairs.
@@phengxiong8843 They are the cheaper solution. Also check these out at home depot. They're just over a buck and work better for binding the cables at the back. www.homedepot.com/p/Everbilt-1-16-in-Aluminum-Ferrule-and-Stop-Set-43274/205883075
@@PeelingLine Thank you so much!
Hi are you still happy with the kayak? Would you recommend it?
It's great besides the steering issue. That seems to be resolved now. The price is a lot better so it would be hard to beat it. The hobbies also have issues with their steering breaking too. So for the price I would say go for it. If you are looking to resell it in a year or two I would go for the hobbie.
You did an amazing job my Man!
That’s why I never pay a warranty for anything, if they can give me some for free it’s all I get
Yeah looks like it’s gonna work good for a while 👍
Thank-you. I don't usually get extended warranties either.
👉👍
Its a good fix, and you are back on the water 👍. Best of luck with the yak from here on out.
Nice review. I want to get a good kayak about that size. Sorry to hear you had some issues with it. I really like the high seat though.
Thanks. The steering is the main issue and this would be great for the price if they addressed it.
Sorry to hear, I had the gen one rudder system. Yes, I heard others complain that they are not responding to any messages. Don't think i would recommend anyone to buy anything from RIOT.
I definitely wouldn't either. Maybe they are going out of business.
@@PeelingLine could very well be, I had several spam comments from fake accounts with exact same image on several of my video praising the kayak.
@@Saltloony I think there are fake reviews out there as well on the sportman's warehouse.
Nice job man! Stuff like this is just way too common these days. And the time is the killer more than the money!
Yeah it is.
Bummer. Well there's the reason why they are the cheapest pedal kayak in your market. Very good job on those repairs tho, hope you can get out again to try it soon !
Still they aren't cheap and I expected more.
Some sellers just doesn't know how to earn your future business. Sorry that you have to go through the trouble just having it for only 3 months.
Pretty cool setup, but shouldn't be having problems after just a few months.
Thanks. You're exactly right. And if people are the company should fix it. They're in Quebec so maybe they just hate Americans.
Dang that's a bummer about the kayak, especially the company not getting back to you. I might gripe about the prices of Hobie's but so far my steering has held up over 3 years now, and they aren't even steal cables
I have looked at the hobies steering and they just use string and pulleys. I may try that if this doesn't work out.
Nice fix on the cables. I've never had a problem with my Slayer (owned it for over 5 years now) but I've seen people having to replace their cables after they upgraded their rudders and it put too much torque on the cables and broke them. Slayer has switched to using cord now instead of metal cables. Really crappy about the customer service. I can't stand companies that blow you off like that.
I was thinking if the cables don't work I will try cord. The owner of the company reached out to me last week.
Man that sucks you had to repair that yourself and they couldn’t get back to your claim. Shame on them. Thanks for uploading this, you may have saved someone else from this issue
Hopefully.
Hi, i saw this and reached out to you personally about 10 days ago on the address you have posted there to adress your issue. I also could not find anything on any of our internal systems that track such requests. Not sure what is going on but let us know how to reach you and we will make it right. Best regards. Riot
Hi Riot, I have the same issue here, it's been a month and customer services just keeps wanting pictures and have sent a bunch. What's going on?
You answered and sent me a replacement for a defective steering mechanism I had after purchasing a Mako 10. But now the replacement part cables broke . I have sent in multiple warranty claims and emails and have left VM and I have not heard back from anyone, my first claim was submitted April 3 2021 it is now May 2 2021! I DEFINATELY DO NOT RECOMMEND Riot to anyone!!!
Thanks buddy for the great info my friend 👍
You are so strong to break the metal wire there! you need a stronger wire or go back Jetty with us again!
I don't know about that. I was thinking of going there this weekend maybe. Depends on my wife's plans.
Hopefully that smaller gauge wire doesnt bind up on you and it lasts for awhile 👍. Hate fixing new things..but atleast it's got nice stickers on it 😉. Good review. Think my big ass would break that seat ..Haha
Thanks. Not much I can do about it. The store wont take it back so I have to fix it. I think big guys have used it but the problem for them was it tipping.
@@PeelingLine probably so being high up. I got my pontoon so I'm unsinkable! Unless someone pops it Haha. Havnt gotten to use it much but I plan to! Be safe out on the water dude
Looks like Kayaks give you nagging problems just like a boat. My Ascend Kayak chair gave me issues also.
But boat problems cost as much as this kayak if the acronym B.O.A.T. is true.
@@PeelingLine They are definitely true lol
Hopefully the manufacturer gets back to you. Maybe they are working reduced hours because of Covid.
The owner of the company got back to me.
@@PeelingLine how was the follow up?
Looks like that kayak company has left you high and dry. While you could only make a right, the kayak company made a left, haha. Glad you were able to make it functional again.
3 months and that cable snaps? Cheap components. That's a shame. I hate companies with poor customer service. I quit on Quantum reels cuz of that.
Nice !Great video👍
Look at them arms!!! Hahhh know wonder you broke the cables.. Ypur a bully to steel!!!! Hahhhh jking!!!! Dang yea. Everytime you have a review about that jawn its like walking down beat street!!!
Haha.
Thats bad customer service by Riot. Good to get the word out, cuz we wont buy their products. At least you will not be spinning in circles with a stuck rudder. 🤣 Nice DIY fix, Peeling Line❗️
True. But I can go really fast using the paddle and peddles. And the steering is pretty good.
Nice sharing. New friend here. Hope too.