How to repair Valtek Type 30 LPG & CNG Injector
HTML-код
- Опубликовано: 16 апр 2017
- In this video you can see how to repair , change plungers of Valtek Type 30 Injector. Valtek Type 30 injectors are most comman in the market. They are durable injectors and easy to repair. We recommend these injectors with our Gasitaly LPG & CNG conversion systems. 2 and 3 ohm versions are available. For more information please visit our website www.gasitaly.it
Авто/Мото
Injectors need to be placed at certain angles? I have tomasetto it-01 plus, and there is some kind of diagram on the rail itself
good, when fitting new pistons, should they be lubricated with oil or grease? Or do they go like this without anything as it comes from the factory? Thank you.
You can use as it comes
Do you know the gap (open/close) ?
After clean, must connect to lpg computer to setup and work normal?
Yes you can use after clean and calibrate.
New kha pe milega
Hello. I have Valtek with 2 X 3 injectors. I have a problem...when i need power the engine is stuttering. When a plug scan tool STAG and shut off cylinder 6 of the LPG it worked great. So something is happening on cylinder 6. What do you recommend? Is it possible that the injector goes bad? resistance is the same on all the injectors (3ohm). Thank you
try to check and calibrate stroke height in service for this injector of 6th cylinder
Здрастси случаино вместо 2ом купил и ставил 3ом если толко катушки менас будет работас савет даисе
Ma poi non vanno ricalibrati?