I really appreciate it man! I’m trying my hardest to get back to it,it’s just not been possible right now,but i promise i will and i’ll do better. Thanks! Ultra
@@Ultra-Collector Hi my friend. Im a old buck that need your expertise. I would REALLY like to install a mock suppressor on any of my KWC/Cybergun Colt 1911 but i dont know how to start with. somes seller website say 11,12,13 or 14 mm ccw so it seem they throw any numbers in the air without truly knowning what they talk about so i searched someone that have EXPERTISE and you seem that guy my friend :)
Hey good question soo I see your alittle confused, how I think of it is positive is how most screws are but if they say negative 14 mm then that would be lefty is tight and right is loosy and also if you do get a long mock your gonna have to get a longer innner barrel, I suggest the brighter c tracer unit as it’s a nice mock and it uses tracer BBs hopefully that helped
@@danbigboss6484 Dude i’m so sorry! Your reply fell through the cracks! It’s pretty simple. Sniper rifles and some old vintage rifles with threaded barrels may use odd tracers and suppressors but pretty much all M4 and other rifles will use a 14mm CCW verses a clockwise barrel,like the comment above has said. Most pistols will need after market threaded barrels like ProArms or GHK or VFc or SAI etc… These will 99.9% always be 14mm CCW(Counter clockwise) so all you need is to get that tracer! I always use Evike and Redwolf when ordering and both have different options in stock. I always hit EVIKE first because there’s no tax and free shipping and there’s always a code for 10-15% off on non-MAPP items! I have after market threaded barrels on all my 140 pistols and have tracers on all my GBB rifles,and the SAI m4 is the only right hand turn barrel,but they make tracers and suppressors that each end is a different turn but still 14mm. Hope that helps!
@@Wiseman2469 This is the Western arms model so everything needs to be for this model. The good news is EVIKE and Redwolf have everything for these WA rifle’s! There may be a VFC version too but you’ll need to search for it! Barrels for gas blowbacks vary from size and bucking and not always model! Ultra
I had to use a mallet to remove the hand gaurd. I then sanded down the inside at specific points,oiled there too! Still it needs a rubber mallet to get started. Once off i didn’t see the adjustment at the base of the barrel like it should be. Out of the box it was hopping .25 up to 50’ but needs .30 at a far distance which is what i use anyway. Because i got three more GBBR at the making of this video i didn’t yet take the outer barrel off and check the hop out. I’ll let you know when i do what the deal is. I did put the Mag Pul Mk2 grip on it though and it looks amazing! Two new GBBR videos posting soon!
@@kamunet1 It was glued in you can see the glue in the video. I used a hot knife to make a few lines at the pin hole the. broke it off. It’s a 14mm right hand turn not ccw/left. I’m using the Acetech Predator LR ,not the SR! Each end can be used as either a right or left turn threading. The longest Tracer they produce which is $55-$60 on Amazon and Acetech!
@@kamunet1 If yours doesn’t have a pin or grub then just pick a spot and cut! I’ll show you the SAI again or i’ll mention it in the next GBBR unboxing tomorrow! For sure man anytime! Share vids on Facebook/Instagram if you can! I’ll give you a shout in a future video! Thanks!
thats wired i got mine 2019 version full lenght front. i had the normal grip that you should get with it. i also got front and rear sights. But my magazine was leaking and would creap open at the middel when i filled it with gas i contacted evike and they send me a STANG mag that worked better than the Pmag. but the STANG mags dont feed vevy well its like for ever 3 time i shoot i actually on fires a bb 1 of 3 times. i got some Matrix Magazines and they work fine but only got 2 of them so thats not really practical when playing games 2 perfoming like they should and the 5 others dont really feed well alos the other magazines is not that gas efficient only the matrix mags are for some reson.
It disassembles the same way any Western arms rifle does. The trigger pack is identical to most Western arms rifles and parts! I swapped hammer springs on a bunch of them.
Just the plastic one. like you mention it’s a 14mm+(clockwise)turn! Instead of spending $20-$40 on just a new flash hider you should do what i did and just buy a Predator LR tracer which has both right and left turn threading,so does the older original Predator S but not the newer v2SR! Great options are at Evike and Acetech they sell Moderator/Supressors that are QD and come with a steel or aluminum flash,usually starting around $40 -$100 or more! Hope that helps! Sub if you’re into tracers and or suppressors, GBBR,GBBP,cars,music ETC… P.S That’s a cool car man!
@@Ultra-Collector is the Threads 14mm negative? If so I might just slap on my acetech blaster on it. I’m just wait for them to get back in stock while the evike says it’s “awaiting stock”
buddy since you arent able to provide me your mail, try to put a disclaimer in your videos that this is airsoft and youtube wont take it down. It will help youtube to differentiate, i can mail you if you give me your mail if you arent able to understand this. I hope it helps you !
I left feedback and they fixed them! I also was getting copyright claims for music in some videos. I appealed it stating because they were public domain on Imovie and they fixed it aswell. Thanks for trying to help! We really appreciate it!
Nice obe👍💪🤝💯🔥
Whens the collection vid!!!?
Can we hear you play one of your guitars?
Yes! One of my first posts back will be me playing a solo! Please be apart of the fam so you can hear it! Thanks you! Crisis
Wish you’d keep making videos man.
I really appreciate it man! I’m trying my hardest to get back to it,it’s just not been possible right now,but i promise i will and i’ll do better. Thanks! Ultra
@@Ultra-Collector sounds good, good to hear from you. Hopefully everything works out for you, and you can come back to making videos.
@@Ultra-Collector wherei can reach you via e-mail ?
Is this gas powered? Or aeg
I know it’s long buddy but watch all the way through and you’ll see it’s a gas blowback “GBBR”
Great video, you should start posting more you seem like a really cool guy.
Thanks man! All it takes is someone who lets me know they want to watch!
@@Ultra-Collector Hi my friend. Im a old buck that need your expertise. I would REALLY like to install a mock suppressor on any of my KWC/Cybergun Colt 1911 but i dont know how to start with. somes seller website say 11,12,13 or 14 mm ccw so it seem they throw any numbers in the air without truly knowning what they talk about so i searched someone that have EXPERTISE and you seem that guy my friend :)
Hey good question soo I see your alittle confused, how I think of it is positive is how most screws are but if they say negative 14 mm then that would be lefty is tight and right is loosy and also if you do get a long mock your gonna have to get a longer innner barrel, I suggest the brighter c tracer unit as it’s a nice mock and it uses tracer BBs hopefully that helped
@@danbigboss6484 Dude i’m so sorry! Your reply fell through the cracks!
It’s pretty simple. Sniper rifles and some old vintage rifles with threaded barrels may use odd tracers and suppressors but pretty much all M4 and other rifles will use a 14mm CCW verses a clockwise barrel,like the comment above has said.
Most pistols will need after market threaded barrels like ProArms or GHK or VFc or SAI etc… These will 99.9% always be 14mm CCW(Counter clockwise) so all you need is to get that tracer!
I always use Evike and Redwolf when ordering and both have different options in stock. I always hit EVIKE first because there’s no tax and free shipping and there’s always a code for 10-15% off on non-MAPP items! I have after market threaded barrels on all my 140 pistols and have tracers on all my GBB rifles,and the SAI m4 is the only right hand turn barrel,but they make tracers and suppressors that each end is a different turn but still 14mm. Hope that helps!
Cual será mejor esta o el modelo de fullmetalarms?
Do you know if i can put GHK or VFC part into it
If not what kind of parts can i put into it
@@Wiseman2469 This is the Western arms model so everything needs to be for this model. The good news is EVIKE and Redwolf have everything for these WA rifle’s! There may be a VFC version too but you’ll need to search for it! Barrels for gas blowbacks vary from size and bucking and not always model! Ultra
Where do you adjust the hop up? Also have you removed the handguard? Mines pretty stuck on
I had to use a mallet to remove the hand gaurd. I then sanded down the inside at specific points,oiled there too! Still it needs a rubber mallet to get started. Once off i didn’t see the adjustment at the base of the barrel like it should be. Out of the box it was hopping .25 up to 50’ but needs .30 at a far distance which is what i use anyway.
Because i got three more GBBR at the making of this video i didn’t yet take the outer barrel off and check the hop out.
I’ll let you know when i do what the deal is. I did put the Mag Pul Mk2 grip on it though and it looks amazing!
Two new GBBR videos posting soon!
@@Ultra-Collector good to know thanks man! Also is the flash hider glued on? I can’t get mine off to save my life and i don’t see a grub screw
@@kamunet1 It was glued in you can see the glue in the video.
I used a hot knife to make a few lines at the pin hole the. broke it off. It’s a 14mm right hand turn not ccw/left. I’m using the Acetech Predator LR ,not the SR!
Each end can be used as either a right or left turn threading.
The longest Tracer they produce which is $55-$60 on Amazon and Acetech!
@@Ultra-Collector where is the pin hole? I don’t even see a grub screw holding the flash hider on. Thank you for the replies :)
@@kamunet1 If yours doesn’t have a pin or grub then just pick a spot and cut!
I’ll show you the SAI again or i’ll mention it in the next GBBR unboxing tomorrow!
For sure man anytime!
Share vids on Facebook/Instagram if you can! I’ll give you a shout in a future video! Thanks!
thats wired i got mine 2019 version full lenght front. i had the normal grip that you should get with it. i also got front and rear sights. But my magazine was leaking and would creap open at the middel when i filled it with gas i contacted evike and they send me a STANG mag that worked better than the Pmag. but the STANG mags dont feed vevy well its like for ever 3 time i shoot i actually on fires a bb 1 of 3 times. i got some Matrix Magazines and they work fine but only got 2 of them so thats not really practical when playing games 2 perfoming like they should and the 5 others dont really feed well alos the other magazines is not that gas efficient only the matrix mags are for some reson.
Do you know where I can find a video of the trigger assembly so I can disassemble and reassemble it
It disassembles the same way any Western arms rifle does. The trigger pack is identical to most Western arms rifles and parts! I swapped hammer springs on a bunch of them.
Does it come with a metal muzzle to replace the orange one? I can’t find one for it unless it’s the 14mm+ one for aegs
Just the plastic one.
like you mention it’s a 14mm+(clockwise)turn!
Instead of spending $20-$40 on just a new flash hider you should do what i did and just buy a Predator LR tracer which has both right and left turn threading,so does the older original Predator S but not the newer v2SR!
Great options are at Evike and Acetech they sell Moderator/Supressors that are QD and come with a steel or aluminum flash,usually starting around $40 -$100 or more!
Hope that helps! Sub if you’re into tracers and or suppressors, GBBR,GBBP,cars,music ETC…
P.S That’s a cool car man!
@@Ultra-Collector is the Threads 14mm negative? If so I might just slap on my acetech blaster on it. I’m just wait for them to get back in stock while the evike says it’s “awaiting stock”
@@Boom-tj6nn Cannot use a blaster!
The SAI is a 14mm+ Right turn. Like i said above your only option is a Predator LR.
@@Ultra-Collector ohhhhhhhhhh, in that case imma buy an adaptor thanks
I watched the video like 2 times but I did not hear the evoke code I may just have missed it but can someone tell me where it is
Ok I found it thanks I can’t wait for the collection video
hate to be that guy, but m16's didn't exist in world war ii :)
No worries! It was a stupid joke i made while extremely blazed! Ha!
@@Ultra-Collector love it! cheers man
🔥🔥NICEEEE🔥🔥 I’m glad I found your channel I look forward to seeing more of your videos📺 I do Stop Motion 🎬📸🎞️ I hope you enjoy my animation‼️ 17:03
I bet this guy is still masked up 24/7.
man doesn't even know how te gbb works and that mostly all of the gbbr have a simular nozzle.
buddy since you arent able to provide me your mail, try to put a disclaimer in your videos that this is airsoft and youtube wont take it down. It will help youtube to differentiate, i can mail you if you give me your mail if you arent able to understand this. I hope it helps you !
I left feedback and they fixed them!
I also was getting copyright claims for music in some videos.
I appealed it stating because they were public domain on Imovie and they fixed it aswell.
Thanks for trying to help!
We really appreciate it!