Sonex Adventures - Takeoff and Landing Techniques - N801UD

Поделиться
HTML-код
  • Опубликовано: 2 сен 2020
  • Sonex Adventures - Takeoff and Landing Techniques - N801UD - Flying Sonex trying 3 point takeoff and landings. KUSE - Fulton County Ohio.
    Music: www.bensound.com/
  • Авто/МотоАвто/Мото

Комментарии • 15

  • @wkboggs5
    @wkboggs5 Год назад

    Bro! You GOT me!
    First video I’ve seen. Like your style. 2 years old now, so things may have changed, but I have subscribed and definitely will be checking out some more of your videos.

  • @christalbert722
    @christalbert722 Год назад

    Nice. Good to see what "normal" every-day operations are like. Makes me want to get back in the air :)

  • @adrianclout761
    @adrianclout761 Год назад

    Hi John thanks for the video. Nice commentary.

  • @mylesvrooman3709
    @mylesvrooman3709 2 года назад

    Hi John, I enjoyed your video. As it played, I paid close attention to your airspeed indicator. From my experience, it appears to be working perfectly. Please note that when your are in your landing configuration with a high angle of attack environment, and you do windward slip activities to maintain runway alignment, you will always see an airspeed disturbance - especially if your pitot tube is located on the lee side of the slip. While I would pay close attention during your walk-arounds, I wouldn't bar press too much over this. It's just a part of gathering it all in as you acclimate to your ship.

  • @onthemoney7237
    @onthemoney7237 3 года назад

    Nice paint job these planes look better all one color like yours 👍

  • @mk23mod08
    @mk23mod08 3 года назад

    I'm your first thumbs up and second subscriber haha. Way ta go my friend. Check the pitot tube obstructions. Your idea sounds valid as well.

  • @graemejwsmith
    @graemejwsmith 3 года назад +2

    Airspeed - my pitot static (the factory recommended one from Aircraft Spruce) suffers from big calibration errors at low speed and high angles of attack. Flaps 30 also just makes a nonsense of the ASI at high angles of attack. Anything below 40 KIAS (I fly in knots) and I take it with a BIG pinch of salt and pay more attention to the seat of my pants and the VSI. I use Downwind 80KIAS, Base 70KIAS, Final 60KIAS and over the fence at 60 - then slow, flare and put her down by eye - the ASI is saying anything from 35 to 45 KIAS. Depends what I am doing with flaps 20/30 at that point.
    Here are some stall numbers I developed:
    ruclips.net/video/rNuGon8IbGE/видео.html&ab_channel=graemejwsmith
    My logbook says I fueled at KUSE 28th July 2012 - while on a flight from Iowa to Rhode Island!

  • @buckbuchanan5849
    @buckbuchanan5849 3 года назад

    Friend on mind just purchased a Sonex with an 80 hp Aerovee engine. Can you specify your engine size, and how much y’all weighed for this flight? We are worried if we fly together, we will be over gross weight. Thanks, enjoyed!!

  • @bigboyair6824
    @bigboyair6824 Год назад

    Curious, what was ur load weight with the 2 of u?

  • @Maynardtkrebs
    @Maynardtkrebs 3 года назад

    Be nice to install an AOA/lift reserve indicator and fly that on approach rather than the ASI.

  • @ryoungatlmidotnet
    @ryoungatlmidotnet Год назад

    Flaps on landing? What is your practice?

  • @user-gm5ol1ve2c
    @user-gm5ol1ve2c 2 года назад

    مساء الورد كان كلامك جميل ونبرة الصوت لها ايقاع على القلب ولااذن جميل جدأ لو سمحت اريد إبعاد سونكس للبدن الخارجي

  • @jasonscott5043
    @jasonscott5043 3 года назад

    What engine do you have?

  • @dalewilliams521
    @dalewilliams521 3 года назад

    Good video! Just a suggestion ... I installed an LRI (Lift Reserve Indicator) in my Cleanex (Corvair powered Sonex) and it is very steady on the readout and gives excellent information for short field take-off and landings. You can see it here in this video (old video from flight testing so please excuse the quality) on the top left of the panel. When the wheels chirp (at :28) it reads one notch into the red zone. ruclips.net/video/WjA7JDJVKeQ/видео.html I can get really consistent approaches regardless of weight, density altitude, etc.