Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) ruclips.net/video/pqOqoi8FEho/видео.html
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) ruclips.net/video/pqOqoi8FEho/видео.html
Thank you for great demonstration. Wish I had the metal skills to do something like this. I like the lift and the multi split wedge. One and done. I use a sledge and a wedge. Sometimes a maul. I just can't keep doing this as I'm getting older. Three cords swinging a sledge is wearing out the shoulders and hands
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) ruclips.net/video/pqOqoi8FEho/видео.html
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) ruclips.net/video/pqOqoi8FEho/видео.html
Niissä uudemmissa pikkukoneissahan tulee minkkiloikku kaupanpäälle 😄 ei saa käsiä vaara-alueelle, mutta saako pölliäkään? Tämä nyt on melko hidasliikkeinen, että järjen kun koittaa pitää mukana, niin toivottavasti pysyy sormet tallella.
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) ruclips.net/video/pqOqoi8FEho/видео.html
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) ruclips.net/video/pqOqoi8FEho/видео.html
Hi, overall flow is 23l/min, so about 6 gallons. The motors are 3kw each, so total power 6kw. I dont no exact diameter of the piston, guessing 125mm, cylinder outer diameter is 140mm. So at max pressure 210bar the force is about 25 metric tons.
Actually, i havent have a bromlem with big woods. But few times i have got a good jam with small ones. A big diameter wood pushes previous wood thru and clears the wedge. Too small wood can wedge whit previous wood and create a good jam. But overall im happy with the machine and it is ok for my needs. The steel is too thin on the push plate. And many other places too. Did not understand, why the commorsial machines used so thich steel. Now i do.
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :) ruclips.net/video/pqOqoi8FEho/видео.html
Hi, i really cant say. 95% of the wood that i split is birch, alder, spruce and pine. Here, in Finland we dont have much hardwood. And when we do have, it is tought to be too valuable to "waist" burning. This oak was strike by lightning and we make table out of it. photos.app.goo.gl/gPbHAs4gG3dUWhir9
Here is some story about buildin. In finnish thou.. konekansa.net/threads/klapikone-projekti.62249/ If i would start all over, i would spend more money on proper steel, suitable for this kind of machine. And copy somethin like eastonmade splitter. They look very nice. But this machine cost about 500€, so pretty low budget.
Kyllähän tuossa muutama asia tulisi tehtyä erilailla, nyt kun konetta on käyttänyt ja huomannut ongelmat. Mutta ku ite tekee, saa sitä mitä tulee 😄 isolle puulle pelaa kyllä hyvin, pienemmälle puulle tarttis olla eri terä, mutta sitten taas turhan hidas. Giljotiinikone olisi hyvä kaveri tuolle, jolla menis pienemmät puut nopeaan.
That latching return throw is brilliant. I was thinking about buying a detent valve for my next build (already got a multi spool block from a scrapped timber crane) but now I'm gonna adapt your idea, thanks !
Thanks. First i was plannin copy this, but then i started thinkin, that semi-auto is safer than flly-automatic 😏 m.ruclips.net/video/GXIRznGtjXE/видео.html
This is a great design but instead of letting the firewood fall on the ground I would want to band it before it falls to the ground and makes you pick it up
@@kihoo9423 Juu. Kyllä se jälkikäteen aateltuna ois pitänyt mennä romukauppaan ja ostaa kunnon plootua kerralla. Rahan ois säästänyt sit puikkokuluissa+ hitokseen vähemmän hitsaamista. Kun nyt tehtiin nurkista löytyneistä romuista kunnon palapeli 😄
Thanks. Yes, the table was not very good. I welded some sheet metal under the blade and edges to the debree separator. Works ok now. photos.app.goo.gl/8yFWbdp5JmsTyNPt9
Sorry, not for sale. And if i charge even 10€/h for work, it would be too expensive. There is a lots of commercial manufacturer, that makes good and better machines. Eastonmade for example.. And there is safety issues too, this certainly dot fill regulations.
😅 True. Actually havent use the lift too much. One time even tought that that was a waste of time to build it. But then again, this winter splitted some large birch and then it is nice to have lift when one peace weight is 40-80kg. And there is pritty obvious desing flaw. The splitting operation handle is on the other side than the lift. You can reach it, but litlle unplesent to use like that. The handel sould have been center of the machine.
Def the best splitter ive ever seen....and I have been specifically looking. Well done and thanks for the idea!
A proverbial Beast! Looks like it was constructed on the Road Warrior movie set.
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :)
ruclips.net/video/pqOqoi8FEho/видео.html
Best splitter I have ever seen
Right outa Texas Chainsaw Massacre lol, in all seriousness it’s pretty cool, congrats
You must be Dr Frankenstein. So nice to meet you and your creation.
Awesome…I am sure you noticed it but your table grate would def help if it came back more to catch those splits.
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :)
ruclips.net/video/pqOqoi8FEho/видео.html
Thank you for great demonstration. Wish I had the metal skills to do something like this.
I like the lift and the multi split wedge. One and done. I use a sledge and a wedge. Sometimes a maul. I just can't keep doing this as I'm getting older. Three cords swinging a sledge is wearing out the shoulders and hands
Genius. Lots of rooms for tweaks but what invention hasn't? Perfect for my maple syrup shack since I need smaller sticks to burn. Good job, man.
It's like watching someone make wood spaghetti. Freaking cool.
1:21 - Sounded like he stopped to take a bite of Cap'n Crunch!
I saw that being towed by a motorcycle in the second Mad Max movie.😂
😅
That is just too cool !
Nyt on halkomakone ja hyvä sellaane👍
Good bit of engineering, home made and saved you alot of money.
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :)
ruclips.net/video/pqOqoi8FEho/видео.html
Imagine how many hours of labor and parts bought. No savings in cost here.
Nice job!
Now THAT's a splitter! Stand back! Marvel.
It's like something from a Saw movie.
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :)
ruclips.net/video/pqOqoi8FEho/видео.html
Kyllähän tulee klapeja 👍🏼💪🏼! Voi toki olla että vaatii vähän jalostusta ennen kuin tulee CE-merkintä ja myyntiä 😉😁.
Niissä uudemmissa pikkukoneissahan tulee minkkiloikku kaupanpäälle 😄 ei saa käsiä vaara-alueelle, mutta saako pölliäkään? Tämä nyt on melko hidasliikkeinen, että järjen kun koittaa pitää mukana, niin toivottavasti pysyy sormet tallella.
I was wondering if this machine could do that with the stone?
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :)
ruclips.net/video/pqOqoi8FEho/видео.html
Wood blocks look to be spruce or fur , will it bust beech , hickory gum , locust , ?
crazy.. :D not the most beauty.. but dang, it works well. great job
Great built! But the table to collect the cuts doesn't seem to work. Perhaps rather a slide?
Welding looks haphazard, however, it appears to be working awesome!
I thought the same thing. Engineering is 💯 but the welding is something from a nightmare.
@@calebsmith95 both you guys suck, the man has a thought all you can do is feel so little you both look foolish
Gorilla welds
That is amazing. I want to do the same thing but with an auto cycle valve on it. What size are those two motors?
Thanks. Motors are 3kw (2x3kw)
That's brutal. I like it.
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :)
ruclips.net/video/pqOqoi8FEho/видео.html
great build! it works.
If there was a wood splitter in mad max, this would be it
За основу ,взят гидровлический цилиндр .какое рабочее давление ? Какой компрэсор используете?
That is bad ass👍👍
How many gallons per minute is the pump? What tonnage is the ram?
And how many horsepower are the electric motors? I want to geek out on the details
Hi, overall flow is 23l/min, so about 6 gallons. The motors are 3kw each, so total power 6kw. I dont no exact diameter of the piston, guessing 125mm, cylinder outer diameter is 140mm. So at max pressure 210bar the force is about 25 metric tons.
Wow, this splitter is unreal! How much to build me one??
That is some Mad Max shit right there
Thanks,
I take that as a compliment 😅
Where should I find that machine
I like it will go a lot faster if you had to help feeding you the logs but it is doing a hell of a lot of work
Fun when you get a big block stuck on there. Ya need a thicker push plate....surf the salvage yard for 1 inch and weld a grid of 1inch nuts to it
Actually, i havent have a bromlem with big woods. But few times i have got a good jam with small ones. A big diameter wood pushes previous wood thru and clears the wedge. Too small wood can wedge whit previous wood and create a good jam. But overall im happy with the machine and it is ok for my needs. The steel is too thin on the push plate. And many other places too. Did not understand, why the commorsial machines used so thich steel. Now i do.
The beast, mad max
That's what I was thinking ,an incredible machine
Just to much to process got dizzy watching it... great job.
Nice! Here is my 24 ton log splitter with 2 hydraulic cylinders, I have built a splitting wedge too. Very fast machine :)
ruclips.net/video/pqOqoi8FEho/видео.html
How many tons of pressure us your machine?
About 25 metric tons
Will it split hardwoods?
Hi, i really cant say. 95% of the wood that i split is
birch, alder, spruce and pine. Here, in Finland we dont have much hardwood. And when we do have, it is tought to be too valuable to "waist" burning. This oak was strike by lightning and we make table out of it.
photos.app.goo.gl/gPbHAs4gG3dUWhir9
Legit. I would let the pieces fall on a slide that let them slide down to a trailer.
The build on that would b awesome to see !
Here is some story about buildin. In finnish thou.. konekansa.net/threads/klapikone-projekti.62249/ If i would start all over, i would spend more money on proper steel, suitable for this kind of machine. And copy somethin like eastonmade splitter. They look very nice. But this machine cost about 500€, so pretty low budget.
You need a small child to help. Looks like a 1.25 person job. Good work.
Back to the drawing table 😂
Kyllähän tuossa muutama asia tulisi tehtyä erilailla, nyt kun konetta on käyttänyt ja huomannut ongelmat. Mutta ku ite tekee, saa sitä mitä tulee 😄 isolle puulle pelaa kyllä hyvin, pienemmälle puulle tarttis olla eri terä, mutta sitten taas turhan hidas. Giljotiinikone olisi hyvä kaveri tuolle, jolla menis pienemmät puut nopeaan.
That latching return throw is brilliant. I was thinking about buying a detent valve for my next build (already got a multi spool block from a scrapped timber crane) but now I'm gonna adapt your idea, thanks !
Thanks. First i was plannin copy this, but then i started thinkin, that semi-auto is safer than flly-automatic 😏 m.ruclips.net/video/GXIRznGtjXE/видео.html
this man has the mind of a soon to be millionaire..now get a patent before the creeps steal your ideas
Вот зто аппарат достлигыи уважения, отличнеишая конструеция
What tonnage is that ?
About 25 metric tons
@@mika69ize very nice i like it !
This is a great design but instead of letting the firewood fall on the ground I would want to band it before it falls to the ground and makes you pick it up
Whats the size of your ram cylinder
Outside diameter is 140mm. So i am guessin the piston diameter would be 120-125mm? 400mm stroke.
On hieno👍 ja ihan parit puikotki näyttää sulanee saumoihin😅
@@kihoo9423 Juu. Kyllä se jälkikäteen aateltuna ois pitänyt mennä romukauppaan ja ostaa kunnon plootua kerralla. Rahan ois säästänyt sit puikkokuluissa+ hitokseen vähemmän hitsaamista. Kun nyt tehtiin nurkista löytyneistä romuista kunnon palapeli 😄
Con otro ayudante q este pasando los trozos te aseguro compa q buena idea
Great splitting capacity.Maybe reconfigure the table and it would be perfect.
Thanks. Yes, the table was not very good. I welded some sheet metal under the blade and edges to the debree separator. Works ok now. photos.app.goo.gl/8yFWbdp5JmsTyNPt9
@@mika69ize I think it's a great set up. Very impressive.
Definitely a fix snd/or repair daily
Frankenstein lives!
Great splitter, now you need a conveyor belt to pile the wood 🪵
can u build one for me
А как сделать такое чудо?☺️
I want to buy would you like to sell it because I am not able to make it
Sorry, not for sale. And if i charge even 10€/h for work, it would be too expensive. There is a lots of commercial manufacturer, that makes good and better machines. Eastonmade for example.. And there is safety issues too, this certainly dot fill regulations.
you need an asistant a weilf=der and some more angle iron , but all and all well done
Why have a lift if you already are lifting logs around kinda defeats the purpose of having one....but all said it's a good build 👍👌🇨🇦
😅 True. Actually havent use the lift too much. One time even tought that that was a waste of time to build it. But then again, this winter splitted some large birch and then it is nice to have lift when one peace weight is 40-80kg. And there is pritty obvious desing flaw. The splitting operation handle is on the other side than the lift. You can reach it, but litlle unplesent to use like that. The handel sould have been center of the machine.
@@mika69ize Great build regardless 👍👌👍👌
That looks like something from mad max
Gute Idee aber schlechte Ausführung Verbesserung nötig
hillbilly gone mad
72 piece of wood… 4 end up on the table. Lol
Yah machine kha milega
Безумный Макс?
like to see it split a knot!?
А как сухую березу с сучками ?
Тупой вопрос, здесь никто не писал что машина расколит все виды дров
They call me the onion
Ух .Шайтан машина.
👍👍
Weld?
Yes
Re-splits?
No.
@@HubertofLiege 😄
Awesome job man. That thing shreds. What kind of wood are you mostly running through? Check us out for firewoodin'. Cheers
Thanks. Mostly pine, birch, spruse and alder. But im not picky, just about any wood that is free or cheap works for me 😄
@@mika69ize I hear that. It all burns!
Hola necesito su precio
красиво..!
🤔😯💪🙏
Think I could still be faster using an axe. Lol
１発で９等分
Muze Lena he machine
Шайтан машина
Хрень полная сложно в управлении и дрова сыпятся куда попало
Ерь полная а не нож
👏
It works
Genius