You are very welcome, and awesome job making it a DIY project. Fixing things at a young age as you are doing will help you greatly later on in life. Great job. 👍🧰
3:31 Holy crap, never would have figured out I needed to push in the latch to get it pushed all the way through. I struggled for 15 minutes before searching and finding this. Thank you!
Carla Galletti Good morning Carla & that’s great news. We really appreciate you reaching out to us & sharing this comment. Let us know if you have any questions. Us DIY’ers need to stick together. 😎👍🔧🔩
Good morning ☕️ we are honored to read this, thank you. Awesome job to you for making it a DIY project. You will continue to benefit greatly by making your projects DIY, and we will always be here to help with any questions as you work through your projects. 😁👍🧰
I have asked my brothers if they would help me install my closet door knob they said they would but they never got around to it and thanks to this video I was able to install it by myself thank you so much!
Awesome Awesome & great job Abby, welcome to the DIY Raptor Club. Definitely a rewarding feeling, thanks for watching & sharing this. Hope all is well Abby. 😎👍🔧🔩
You’re the best. Live in Texas and our old front door handle got super rusty and started melting from inside out lol so had to replace and this video made me the hero of the family 😂😂😂 thank u 🙏
Thank you for making this straight to the point video, really helped me alot. You have to love how RUclips is the closest thing to a time machine we have.
Good morning Gary, we appreciate you watching. Welcome to the DIY Raptor Club. RUclips is an incredible assets to many. Hope all is well. Enjoy your day. 😎👍🔧🔩
Good morning ☕️ we appreciate that. We are here to help you through your DIY project when that time comes. You can do this, looking forward to hearing back from you. 🧰
Never thought of need to watch a video for this but I should have watched this first. I ended up locking myself in the room yall! It would NOT open from the inside or the outside. Ahhhh the field trip I took to get it opened lol. But my inner mechanism might be missing something. I probably just need to go to the store and get a whole new one FOLLOWING THESE FRIGGEN DIRECTION 😂Thanks for the video man.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. We appreciate you sharing your experience, and if we could hang out with you as we drink our coffee, we would be all ears listening to your field trip. 😁👍 You’re not the only one that has done that…but sounds like you conquered your DIY project, and again we thank you for sharing this. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
@@DIYwithMichaelBorders don’t mind if I do! Coffee makes everything better. I appreciate your attention in this conversation. Yeah I’m just going to buy a new knob and then re watch this video to make sure I’m aligning things right. I think the old one may have lost something in the mechanism. Good to know that I’m not the only one lolzzz. Thank you and I’ll be sure to check back on more videos here. Have a great Wednesday!
@@ChangedUpNowWhat We appreciate the reply and our Wednesday has been busy. We filmed PART 1 of removing a jet ski engine from a Sea doo ski. Hope your project goes well once you get the new door knob. 😎👍
@@DIYwithMichaelBorders it was wonderful you explain this so to the point! 😊 they are typical development type door knobs they just needed to be fixed properly thank you so much for this awesome video! 😊
Sadly i watched a lot of these doorknob installation tutorials but this specific knob i purchased was poorly made. Screws werent aligning correctly. Will buy another one and try this tutorial again
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Very cool, that’s awesome you made this a DIY project with your son. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. You are very welcome, let us know if you have any questions. Enjoy your weekend. 😎👍
Charlotte Santiago Thanks for watching Charlotte, we appreciate that. Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
Thanks for watching & we really appreciate you sharing this. Our goal is to always be here to help answer questions. Us fellow DIY’ers need to stick together. Unfortunately it may not have helped for some...🤔 Hope all is well with you. Enjoy your night.
Appreciate your work, but the video does not deal with the 2 hardest parts (in my case); 1) getting the long screws to engage with the rotatable plate behind them and 2) getting the lock to work. On (1) unless I twist the outer plate counter-clockwise, the screws just "fall through" the holes ; so that step has to be done carefully. Then (2) I find that the key slit is not vertical and the lock won't engage, so there is some other step that needs to be in the video so that everything lines up properly. I am still fiddling with the problem and came to your (and other) videos to see if they mention these two issues. So far, no luck. (And I do appreciate the hard work to put the video together. I know you cannot anticipate every problem. I'm writing just in case you ever redo this. My guess is that I'm not the only one with these issues. And ... the instructions that come with a standard doorknob are written in the world's smallest font. So they are pretty much useless. (Frustration!)
Good morning ☕️ any update? Are you installing the same kit as shown in this video? Door knob kits are pretty standard these days however there are a few that have a few extra confusing steps. Please keep us posted.
At about 1:43 or so in the video, one can see a sort of metal ring amongst the parts you were taking out of the package. However, you never showed that part being used nor did you mention it. I had tried to install a new door lever and have not had any luck. I first tried doing it without the round ring that was also in the package I bought - and it didn't work. That's when I decided to look online to try to see how to properly install the lever - but guess I'll just try again. I had installed a new handle/lever on an exterior door a year or two ago and had no problem at all. Later: I was able to get the handle installed, without the round ring that had been included in the packaging, which I had been trying to fit in before.
N E 1 Thanks for watching & we appreciate you reaching out to us. Slowly & carefully without cross-threading or over-tightening screws. We hope the video helped. Please subscribe to the channel and ring your RUclips bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩
I wish you showed how to install a knob as the first time install in a new door where the cut out in the door isn't deep enough for the latch and needs to be deepened.
Fernando RuiZ Thanks for watching Fernando. Let us know if you have any questions. Please subscribe to the channel and ring your RUclips bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩
Is there such a way to rotate the lock position from horizontal to vertical? I have a dead-bolt up top that locks at a vertical position and I got this Schlage that is locking at a horizontal, and I truly don't know how to fix it. I fiddled with it enough that I opened the whole thing up, and springs fell out. -- Well, this lock is going back to the MFG. Very frustrating, any help is greatly appreciated.
Thanks for watching & welcome to the DIY Raptor Club. You may be able to find a knob that is designed this way online. Ace Hardware is a great place to check as well. We saw door knobs while at Ace Hardware recently that had vertical position locks. Please keep us posted on your project, us DIY’ers need to stick together! 😎👍🔧🔩
gillart99 Thanks for watching, hope the video helped. Definitely let us know how your smaller knob fits. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your RUclips Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & sharing this. That’s odd...what kind of replacement knob did you put in? Keep us posted on your project. Us fellow DIY’ers need to stick together! Enjoy your day. 😎👍🔧🔩
@@DIYwithMichaelBorders The problem was the bolt itself. It has a slide inside it that had moved. I had to stick an awl inside the side of the bolt to move and reset that slide. That step opened up two holes for the screws to go through. If you redo this video, I suggest you show this possibility and its solution.
Thanks for watching, awesome job making it a DIY project sharon. Something is too tight. Either the inner shaft that is inserted through the middle of door or knobs themselves are too tight. Is the door knob brand new? It’s possible that the knob kit is damaged…🤔…if it’s new, was the package sealed? Keep us posted and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰
@@sharondiblasio1952 Thanks for the reply sharon, the inner mechanism should already be lubricated from manufacture however if it’s not, it must be lubricated. White lithium grease is better to use than WD40. Below is a link. amzn.to/3lWYIKa Please keep us posted. 🧰
Good morning & welcome to the DIY Raptor Club. You can place a cloth, towel, rag, or shirt over knob to alleviate the screw & screwdriver from scratching it as you secure screws.
bulletprooff1k Thanks for watching & we appreciate you reaching out to us. That is a cut-out insert you can use on the inner portion of the drilled out hole in door. Some people use it, most don’t. Glad to help! Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your RUclips Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
homeguest unton Thanks for watching & we replaced all old knobs to new round knobs. Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. That will be personal preference, we find it best for our mission to do it as shown here. 😎👍
4:22 How in the bloody hell are you supposed to screw in and tighten the two screws, when a Phillips head screwdriver won't work at an angle?!?!?!? I got one kinda in and the other only about half way. it's stripped now
@@DIYwithMichaelBorders I only managed to get one tight, the other is cross threaded and only in about half way, It will work till I can get something else. It's not loose. Not sure how or if I can get it out to replace, trying not to think about it now
SLOB 1vs7gaming_com Thanks for watching & we appreciate you reaching out to us. That is a cut-out insert you can use on the inner portion of the drilled out hole in door. Some people use it, most don’t. Glad to help! Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Vanilla Berry Thanks for watching & we hope the video helped. Keep us posted on your DIY project, we are always here to help! Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
homeguest unton Thanks for watching & we replaced all old knobs to new round knobs. Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
homeguest unton Thanks for watching & we replaced all old knobs to new round knobs. Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
homeguest unton Thanks for watching & we replaced all old knobs to new round knobs. Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
Thanks for watching & welcome to the DIY Raptor Club. That is an insert that goes inside door & houses the spring loaded latch. Hope you enjoyed the video. 😎👍🔧🔩
doc kilat Thanks for sharing your comment. Great question & it’s all about design & appealability. It’s the style of the knob. 😀 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. How did your project go, is knob installed and working as designed? Let us know if you have any questions and hey if you’re into crypto, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰
I did get it done. It was pretty straightforward. I was just concerned about having to switch the length of it. But it was fine at the factory setting. Once I looked at it, it was pretty self explanatory. Thanks.
![How To Install A Door Handle [Step-by-step guide]](/img/1.gif)
Im 15 and don’t know how to do a lot of manual stuff I honestly thought it was gonna be harder than I thought. THANK UOU SO MUCHHH
You are very welcome, and awesome job making it a DIY project. Fixing things at a young age as you are doing will help you greatly later on in life.
Great job. 👍🧰
@callapsade
I’m the opposite, I thought it’d be easy but attempting it myself was definitely not easy. Hopefully this video will help
3:31 Holy crap, never would have figured out I needed to push in the latch to get it pushed all the way through. I struggled for 15 minutes before searching and finding this. Thank you!
Good morning ☕️ we appreciate you reaching out to us. We are honored that our video helped you get across the finish line.
😁👍🧰
The instructions in your video were crystal clear. My daughter and I were able to install our door knob quickly and easily. Thank you so much!
Carla Galletti
Good morning Carla & that’s great news. We really appreciate you reaching out to us & sharing this comment. Let us know if you have any questions. Us DIY’ers need to stick together.
😎👍🔧🔩
Thanks for the help man. I don't think i'll ever forget this.
Such a great video! You did an excellent job of explaining, and I was able to install the door knob after watching the video once.
Good morning ☕️ we are honored to read this, thank you. Awesome job to you for making it a DIY project.
You will continue to benefit greatly by making your projects DIY, and we will always be here to help with any questions as you work through your projects.
😁👍🧰
Thank you my small hungarian (Mongolian) child really needed this video thanks a ton!!! We are going to install doorknobs now
xoxoxo
You are very welcome. We are very honored you took the time to write us, thank you.
Let us know if we can help answer any questions. 😁👍🧰
I have asked my brothers if they would help me install my closet door knob they said they would but they never got around to it and thanks to this video I was able to install it by myself thank you so much!
Awesome Awesome & great job Abby, welcome to the DIY Raptor Club. Definitely a rewarding feeling, thanks for watching & sharing this. Hope all is well Abby.
😎👍🔧🔩
You’re the best. Live in Texas and our old front door handle got super rusty and started melting from inside out lol so had to replace and this video made me the hero of the family 😂😂😂 thank u 🙏
@@galexymdh2447
We are honored to help, and 👍👍 to you for making it a DIY project!
🧰
Thank you for making this straight to the point video, really helped me alot. You have to love how RUclips is the closest thing to a time machine we have.
Good morning Gary, we appreciate you watching. Welcome to the DIY Raptor Club.
RUclips is an incredible assets to many. Hope all is well. Enjoy your day.
😎👍🔧🔩
I haven’t tried your method yet but I can’t thank you enough for giving me the confidence to go for it!!
Great video
Good morning ☕️ we appreciate that. We are here to help you through your DIY project when that time comes.
You can do this, looking forward to hearing back from you. 🧰
Simple and straight to the point. Thanks!
WithinSecrets
You are very welcome & we appreciate you watching. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Thank you so much! I bought this exact same knob for 20 bucks, wish it was 10 lol
@@dangerdest3606
You are welcome. 😁👍🧰
Never thought of need to watch a video for this but I should have watched this first. I ended up locking myself in the room yall! It would NOT open from the inside or the outside. Ahhhh the field trip I took to get it opened lol. But my inner mechanism might be missing something. I probably just need to go to the store and get a whole new one FOLLOWING THESE FRIGGEN DIRECTION 😂Thanks for the video man.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
We appreciate you sharing your experience, and if we could hang out with you as we drink our coffee, we would be all ears listening to your field trip. 😁👍
You’re not the only one that has done that…but sounds like you conquered your DIY project, and again we thank you for sharing this.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
@@DIYwithMichaelBorders don’t mind if I do! Coffee makes everything better. I appreciate your attention in this conversation. Yeah I’m just going to buy a new knob and then re watch this video to make sure I’m aligning things right. I think the old one may have lost something in the mechanism. Good to know that I’m not the only one lolzzz. Thank you and I’ll be sure to check back on more videos here. Have a great Wednesday!
@@ChangedUpNowWhat
We appreciate the reply and our Wednesday has been busy. We filmed PART 1 of removing a jet ski engine from a Sea doo ski.
Hope your project goes well once you get the new door knob. 😎👍
Such clear instructions! Thank you Michael!
@@amandarose8045
You are welcome 😁👍🧰
Thanks, most helpful for an old lady. I do, however, have the right screwdriver!!
L T
Thanks for watching & we appreciate you reaching out to us. Having the right tools goes a long way.
😎👍🔧🔩
thank you! i had the same door knobs for years from builder the things were falling apart all done now awesome! 🙂
Awesome job getting them back together and operating to your liking.
Reach out to us any time! 😎👍
@@DIYwithMichaelBorders it was wonderful you explain this so to the point! 😊 they are typical development type door knobs they just needed to be fixed properly thank you so much for this awesome video! 😊
@@2009jadeorchid
We are happy you found it helpful. We enjoy the feedback. 😁👍
Good instruction easy to follow I was over-thinking things and was expecting it to be harder.
Thank you, we are honored you thought our video was helpful.
😁👍🧰
I will give it a shot. You made it look so easy.
We appreciate you reaching out to us. Keep us posted. Welcome to the DIY Raptor Club.
😎👍🔧🔩
Thank you so much! The instructions included with my doorknob were only confusing diagrams, but your video made the installation so easy.
Sadly i watched a lot of these doorknob installation tutorials but this specific knob i purchased was poorly made. Screws werent aligning correctly. Will buy another one and try this tutorial again
Thanks for watching, we are here to help answer any questions. Looking forward to hearing back from you on how the new install goes. 👍
Very helpful. Thank you for posting this!
vfayes
Thanks for sharing, happy to help. 😀👍
Thank you. My son and I installed.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Very cool, that’s awesome you made this a DIY project with your son.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Perfect video, worked like a charm. Thank you so much
Awesome 😁👍
Thanks for taking the time to share this on your Monday morning. Many more helpful videos to come, we promise!
👍🧰
This was very helpful. Thank you!
@@vanillacarnivore
Good morning ☕️ you are welcome.
😁👍🧰
perfect video i had no issues! thank you SO MUCH!
This is the 999,999th one. Congratulations.
Simon99
Thanks for watching. Let us know if you have any questions.
😎👍🔧🔩
Thanks for the Help. Greatly Appreciated
You are very welcome, thank you for reaching out to us. 🧰
Awesome video very helpful!
Perfect. fast, easy and clear instruction thank you.
Mrs. Bee
We appreciate that & thanks for watching. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
@@DIYwithMichaelBorders ain't that the truth!!! Thank God for RUclips and folks like you who help us less educated get things done!!!🤣🤣🤣👍
Mrs. Bee
😎👍🔧🔩
Thank you for the tutorial so helpful 🎉🎉😁
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community.
You are very welcome, let us know if you have any questions. Enjoy your weekend.
😎👍
If ever I need to change a door knob I will know where to look :).....thanks AGAIN !!
gjax57
Thanks for watching! We always have some type of DIY project going on here! 😆. Lots more videos to come!
😎👍🔧🔩
@@DIYwithMichaelBorders Looking forward YAY !!
gjax57
😁
Saved me a $100 !! Thx
Thanks for watching & welcome to the DIY Raptor Club. Saving $100 is definitely a great way to end the day!
Enjoy your day! 😎👍🔧🔩
Thanks for sharing this video!
You are welcome, thanks for reaching out to us. Enjoy your upcoming weekend. 🧰
Thank you! Such a big help!
Brandy Taylor
You are very welcome, glad to help.
😎👍🔧🔩
Thank you for this! 😊
You are welcome. 😁👍
Thank you! You have a way to make it look so simple. 🙏🏼🙏🏼🙏🏼
Charlotte Santiago
Thanks for watching Charlotte, we appreciate that. Let us know if you have any questions. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
Thanks for the lesson I'm going to try this wish me luck
You are very welcome, looking forward to hearing back from you on how it goes. 👍
@@DIYwithMichaelBorders it was a little bit of a challenge at the end but I got it and feeling good about it
@@robertreed6907
Awesome Awesome!!! 😎👍 we appreciate the follow up, reach out to us any time!
If you’re locked out, couldn’t you just unscrew the screws since they’re on the outside?
I’m bout to try this and watch the video again !
Weather I can do this or not is irrelevant, but how can you dislike this video geeesh 🤯
Thanks for watching & we really appreciate you sharing this. Our goal is to always be here to help answer questions. Us fellow DIY’ers need to stick together. Unfortunately it may not have helped for some...🤔
Hope all is well with you. Enjoy your night.
Glossed over installing the last two screws. How do you easily get them to align??
Appreciate your work, but the video does not deal with the 2 hardest parts (in my case); 1) getting the long screws to engage with the rotatable plate behind them and 2) getting the lock to work. On (1) unless I twist the outer plate counter-clockwise, the screws just "fall through" the holes ; so that step has to be done carefully. Then (2) I find that the key slit is not vertical and the lock won't engage, so there is some other step that needs to be in the video so that everything lines up properly. I am still fiddling with the problem and came to your (and other) videos to see if they mention these two issues. So far, no luck. (And I do appreciate the hard work to put the video together. I know you cannot anticipate every problem. I'm writing just in case you ever redo this. My guess is that I'm not the only one with these issues. And ... the instructions that come with a standard doorknob are written in the world's smallest font. So they are pretty much useless. (Frustration!)
Good morning ☕️ any update? Are you installing the same kit as shown in this video? Door knob kits are pretty standard these days however there are a few that have a few extra confusing steps. Please keep us posted.
At about 1:43 or so in the video, one can see a sort of metal ring amongst the parts you were taking out of the package. However, you never showed that part being used nor did you mention it. I had tried to install a new door lever and have not had any luck. I first tried doing it without the round ring that was also in the package I bought - and it didn't work. That's when I decided to look online to try to see how to properly install the lever - but guess I'll just try again. I had installed a new handle/lever on an exterior door a year or two ago and had no problem at all. Later: I was able to get the handle installed, without the round ring that had been included in the packaging, which I had been trying to fit in before.
Thanks for watching. The insert will be personal preference. Your setup may already have one installed. How is your DIY project going?
Thank you so much! This helped a ton!
So happy to help, welcome to the DIY Raptor Club. Hope all is well. 😎👍
how do you tighten the screws ? you skipped that part
N E 1
Thanks for watching & we appreciate you reaching out to us. Slowly & carefully without cross-threading or over-tightening screws.
We hope the video helped. Please subscribe to the channel and ring your RUclips bell 🔔 this will be very helpful to us thanks again.
😎👍🔧🔩
Thank you
You are very welcome, thanks for watching. 😎👍
Very good even tho I new how good refresher course 🤙
Awesome, thanks for leaving a comment. Hope all is well. 👍
I wish you showed how to install a knob as the first time install in a new door where the cut out in the door isn't deep enough for the latch and needs to be deepened.
Thanks for watching, are you still having difficulty with the install? Please let us know if you have any questions. 🧰
@@DIYwithMichaelBorders Thanks. I chiseled it with a wood chisel it until the plate fit flush.
@@kiheisun
Thanks for the follow up.
I’ll try this.
Fernando RuiZ
Thanks for watching Fernando. Let us know if you have any questions.
Please subscribe to the channel and ring your RUclips bell 🔔 this will be very helpful to us thanks again.
😎👍🔧🔩
Is there such a way to rotate the lock position from horizontal to vertical? I have a dead-bolt up top that locks at a vertical position and I got this Schlage that is locking at a horizontal, and I truly don't know how to fix it. I fiddled with it enough that I opened the whole thing up, and springs fell out. -- Well, this lock is going back to the MFG. Very frustrating, any help is greatly appreciated.
Thanks for watching & welcome to the DIY Raptor Club. You may be able to find a knob that is designed this way online.
Ace Hardware is a great place to check as well. We saw door knobs while at Ace Hardware recently that had vertical position locks. Please keep us posted on your project, us DIY’ers need to stick together!
😎👍🔧🔩
Thank you Michael
I always have a struggle with the angle of last two screws. Any suggestions?
M. Jenkins
Thanks for watching, they can be tricky. Takes patience as you align those screws. Keep us posted.
😎👍🔧🔩
Anytime i need a doorknob installed i come to this video
Good job 👏
Thanks for watching & welcome to the DIY Raptor Club.
Enjoy your night! 😎👍🔧🔩
Thanks brotha
You are welcome. 😁👍🧰
This locks my door
You should replace the plate for colour matching
Kieran Bricker
Thanks for watching. We hope the video helped.
😎👍🔧🔩
Thanks! Easy and straightforward!👍🏼
That’s our goal. We appreciate you sharing this & hope all is well.
Enjoy your weekend. 😎👍🔧🔩
Thanks. I bought a regular doorknob but it was too wide for my standard door. I guess I need to buy a smaller one??
gillart99
Thanks for watching, hope the video helped. Definitely let us know how your smaller knob fits. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀
Please subscribe to the channel and Ring your RUclips Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Nice idea but my screws don't align with the bolt
Thanks for watching & sharing this. That’s odd...what kind of replacement knob did you put in? Keep us posted on your project. Us fellow DIY’ers need to stick together!
Enjoy your day. 😎👍🔧🔩
@@DIYwithMichaelBorders The problem was the bolt itself. It has a slide inside it that had moved. I had to stick an awl inside the side of the bolt to move and reset that slide. That step opened up two holes for the screws to go through. If you redo this video, I suggest you show this possibility and its solution.
@@elmerviviennejohnsonhomemo7784
Thanks for the update & we appreciate the advice. You Rock!
😎👍🔧🔩
Everything went very well but the knobs are very hard to turn
Thanks for watching, awesome job making it a DIY project sharon. Something is too tight. Either the inner shaft that is inserted through the middle of door or knobs themselves are too tight.
Is the door knob brand new? It’s possible that the knob kit is damaged…🤔…if it’s new, was the package sealed?
Keep us posted and hey if you’re into crypto trading, check out our newly launched DIY ecosystem.
Toolboxtoken.com
Reach out to us any time! 🧰
@@DIYwithMichaelBorders how do I fix that? I thought that that piece that goes through the middle needed wd40?
@@sharondiblasio1952
Thanks for the reply sharon, the inner mechanism should already be lubricated from manufacture however if it’s not, it must be lubricated.
White lithium grease is better to use than WD40. Below is a link.
amzn.to/3lWYIKa
Please keep us posted. 🧰
how do you screw it in and not damage the knob?
Good morning & welcome to the DIY Raptor Club. You can place a cloth, towel, rag, or shirt over knob to alleviate the screw & screwdriver from scratching it as you secure screws.
What’s the ring looking thing for? The video doesn’t show it being installed
bulletprooff1k
Thanks for watching & we appreciate you reaching out to us. That is a cut-out insert you can use on the inner portion of the drilled out hole in door. Some people use it, most don’t.
Glad to help! Many more helpful videos to come! 😀
Please subscribe to the channel and Ring your RUclips Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders the old door knob was working fine
homeguest unton
Thanks for watching & we replaced all old knobs to new round knobs. Let us know if you have any questions. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
Why did you not separate the two plates and not add the drive-in collar?
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community.
That will be personal preference, we find it best for our mission to do it as shown here. 😎👍
@@DIYwithMichaelBorders But it was in the instructions
@@reilea9977
Thanks for the reply, you can also choose to keep original trim plate installed.
@@DIYwithMichaelBorders See, that's the things, instructions never say customer has a choice. That's why I went to RUclips. Thanks
@@reilea9977
😎👍
4:22 How in the bloody hell are you supposed to screw in and tighten the two screws, when a Phillips head screwdriver won't work at an angle?!?!?!?
I got one kinda in and the other only about half way. it's stripped now
@@Aspiring-Hobo
Thanks for watching, any update? These little mechanisms can be tricky at times.
@@DIYwithMichaelBorders I only managed to get one tight, the other is cross threaded and only in about half way, It will work till I can get something else. It's not loose. Not sure how or if I can get it out to replace, trying not to think about it now
@@Aspiring-Hobo
Thanks for the follow up, happens to the best of us… Ask me how I know.
😁👍
What's that peice at 1:40 sitting in the plastic container that you don't grab? Do you use it?
SLOB 1vs7gaming_com
Thanks for watching & we appreciate you reaching out to us. That is a cut-out insert you can use on the inner portion of the drilled out hole in door. Some people use it, most don’t.
Glad to help! Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders what purpose does it serve?
Brooktrout Angler
Thanks for watching. It assist in the connection process.
Thanks mike
Kenneth Blake
You are very welcome Kenneth.
😎👍🔧🔩
Awesome 💞
Vanilla Berry
Thanks for watching & we hope the video helped. Keep us posted on your DIY project, we are always here to help!
Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders okay diy with michael borden why did you replace a door knob what was working fine
homeguest unton
Thanks for watching & we replaced all old knobs to new round knobs. Let us know if you have any questions. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
The plate on the edge of the door looks really bad the way you inset it
cool vlog
Anonymous3777 R
Thanks for watching. Let us know if you have any questions.
😎👍🔧🔩
@@DIYwithMichaelBorders why are you replacing door knobs that work fine
homeguest unton
Thanks for watching & we replaced all old knobs to new round knobs. Let us know if you have any questions. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
@@DIYwithMichaelBorders so you replaced all the knobs with kwiksets
homeguest unton
We did.
😎👍🔧🔩
I watched to see how you got those long screws, by the knob, in and how you screwed them in! 😅
Laurel Lampi
Thanks for watching, let us know if you have any questions. Keep us posted on your project.
😎👍🔧🔩
why did you replace the old door knob
homeguest unton
Thanks for watching & we replaced all old knobs to new round knobs. Let us know if you have any questions. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
what was that round ring type thing. i noticed u didnt use it either. idk what to do with it
Thanks for watching & welcome to the DIY Raptor Club. That is an insert that goes inside door & houses the spring loaded latch. Hope you enjoyed the video.
😎👍🔧🔩
But why does it not have a key or keyhole? It would be easier
doc kilat
Thanks for sharing your comment. Great question & it’s all about design & appealability. It’s the style of the knob. 😀
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your RUclips notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders it is bed and bath thats why
You didn't tell me the difference between the different settings.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
How did your project go, is knob installed and working as designed?
Let us know if you have any questions and hey if you’re into crypto, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
I did get it done. It was pretty straightforward. I was just concerned about having to switch the length of it. But it was fine at the factory setting. Once I looked at it, it was pretty self explanatory. Thanks.
@@dominictantalo9348
AWESOME! Thank you for taking the time out of your day to share this follow up.
Great to hear the factory setting worked. 😎👍
BBanz
Thanks for watching.
Every instruction on door knobs/locks are crazy not understandable
Thanks for watching & they can definitely be a bit non user friendly. Let us know if you have any questions.
😎👍
All this extra bullshit you say just show us how to put the lock on
Thank you
Cher yl
You are very welcome. Let us know if you have any questions.
😎👍🔧🔩