Only those who have done similar modelling before would understand the effort needed for a piece of work like this. Wellhead installation has always been a process that is hard to visualize in mind. Thank you for this great animation and I am very sorry to hear that you did not get paid for this.
@azzor Thank you very much for coming by to check this animation out. Hopefully you like the animation and yes indeed required hundreds of hours to make this animation done. even though not get paid, I received many appreciation like you did that worth more than money. Please check the other video and please do not forget to subscribe so you will not miss any new video coming. Thank you very much :)
Thank you very much for using SolidWorks explaining the installation of the wellhead. I have background in SolidWorks and I truly appreciate the hours you putting into making this video. I'm new to oil and gas, so I have couple questions. Why didn't this video shows tubing spool installation and packer assembly installation in the production casing. Is it not necessary or how?
@haziq mazlan, thank you for coming to check out my animation. Actually It's necessary on the procedure but it is skipped on this animation to save duration of the video Please subscribe to my channel so you won't miss the upcoming videos
Good basic wellhead explanation video. Base plate between casing head and conductor is good solution compared to landing ring and load ring which requires ideal centralization, no offset, otherwise cannot land starter Head. It seems Vetco Gray wellhead system. Or is it Cameron or FMC Technologies? Could be Breda Energy or Streamflo
Thank you very much for your lovely comment Mister Sham Suzzaman and thank you for checking this video out, please subscribe to my channel so you will not miss the upcoming videos Have a great day
I have somethings need to add, espectially during the Packoff retrieving way. Imagine If some peices of rock or metal obstruck above the setting ring so that your Retrieving tool absolutely cannot engage to the Packoff thread and also unable to deactivate the setting ring. However thanks for good visualized about how to installation wellhead.
Dear Sir and Ma'am at Southern Star Group Co., Ltd. Thank you very much coming by for checking this video out. I will took that as a compliment, and glad my animation cleared up your doubt. Thank you very much
Amazing demonstration and animation wellhead installation, specially for the fresh graduates. Thank you for your efforts, really is not easy to realize it in solidWorks. Good job 💪.
@Hicham_Abed, thank you very much for your good words, I took that as a compliment, and thank you for checking this video, please do not forget to subscribe. 😉
How long does it take for the crews to complete the Christmas tree and bring the operation into production? I can hear a low frequency humming noise all night while they are working and it's terrible.
This is really a nice Wellhead installation video. Appreciate your efforts. Do Surface Wellhead industries still use two different tools one for running casing hanger and another for running pack -off?
Thank you very much for your lovely comment Mister Gershon, I love Colombia 🇨🇴 Please check the other videos, like and subscribe so you will not miss any up coming videos Thank you very much 😊 👍
Hi Reghis, thank you for your question, it's not only just ordinary washing, required 800 psi pressure during washing, that's why using wash tool. Thank you, please subscribe if possible
Thank you very much for your lovely comment Mister Ali, Unfortunately the BPV not shown. I will try make new video to show how to install The BPV on the tubing hanger. Please subscribe so you'll not miss the upcoming videos
Dear Udeme Udo, thank you very much for checking this video out, hopefully next time I can share some videos how to make the animation, please subscribe so you won't be miss out he up coming videos k Thank you very much
Hi @him 69, they are in the middle east, but when I finished and send the animation, they did not pay a single penny for my work hard. So, the animation is mine :)
@@toyol1111111 the design using internal locking-ring style since the wellhead doesn't use lock down screws. The why to pull over is as same as assemble one but in a reverse way. Thanks for checking this video out btw
Only those who have done similar modelling before would understand the effort needed for a piece of work like this. Wellhead installation has always been a process that is hard to visualize in mind. Thank you for this great animation and I am very sorry to hear that you did not get paid for this.
@azzor Thank you very much for coming by to check this animation out. Hopefully you like the animation and yes indeed required hundreds of hours to make this animation done. even though not get paid, I received many appreciation like you did that worth more than money. Please check the other video and please do not forget to subscribe so you will not miss any new video coming.
Thank you very much :)
Hi, well done. Can you please export and share navisworks file? :)
@@vugogaming thank you very much for your good comment.
I'm afraid if I don't have the original files anymore
Can you share this model step file
Thank you very much for using SolidWorks explaining the installation of the wellhead. I have background in SolidWorks and I truly appreciate the hours you putting into making this video. I'm new to oil and gas, so I have couple questions. Why didn't this video shows tubing spool installation and packer assembly installation in the production casing. Is it not necessary or how?
@haziq mazlan, thank you for coming to check out my animation.
Actually It's necessary on the procedure but it is skipped on this animation to save duration of the video
Please subscribe to my channel so you won't miss the upcoming videos
Good basic wellhead explanation video. Base plate between casing head and conductor is good solution compared to landing ring and load ring which requires ideal centralization, no offset, otherwise cannot land starter Head. It seems Vetco Gray wellhead system. Or is it Cameron or FMC Technologies? Could be Breda Energy or Streamflo
Not belong companies that mentioned
Highly appreciable work
Thank you very much for your lovely comment Mister Sham Suzzaman and thank you for checking this video out, please subscribe to my channel so you will not miss the upcoming videos
Have a great day
Thanks for your video. It helps so much..
I have somethings need to add, espectially during the Packoff retrieving way. Imagine If some peices of rock or metal obstruck above the setting ring so that your Retrieving tool absolutely cannot engage to the Packoff thread and also unable to deactivate the setting ring. However thanks for good visualized about how to installation wellhead.
Dear Sir and Ma'am at Southern Star Group Co., Ltd. Thank you very much coming by for checking this video out. I will took that as a compliment, and glad my animation cleared up your doubt.
Thank you very much
Amazing demonstration and animation wellhead installation, specially for the fresh graduates. Thank you for your efforts, really is not easy to realize it in solidWorks. Good job 💪.
@Hicham_Abed, thank you very much for your good words, I took that as a compliment, and thank you for checking this video, please do not forget to subscribe. 😉
How long does it take for the crews to complete the Christmas tree and bring the operation into production? I can hear a low frequency humming noise all night while they are working and it's terrible.
This is really a nice Wellhead installation video. Appreciate your efforts. Do Surface Wellhead industries still use two different tools one for running casing hanger and another for running pack
-off?
Well done. One of the best video explaining the wellhead installation.
Thank you very much for your good words, I took it as compliment.
Please subscribe to my channel for getting upcoming videos
Thanks for your video. I'm download this video
I Subscribe your channel nad like this video 🤗 🤗
@@rjfunnyzone8275 Thank you so much for subscribing to my channel and really happy you like the video, please use it well. thanks
Machine shop ffff,services 24/7
Excelent!! thanks a lot
Fantastic , excellent animation out , thanks for your video , regards from Colombia .
Thank you very much for your lovely comment Mister Gershon, I love Colombia 🇨🇴
Please check the other videos, like and subscribe so you will not miss any up coming videos
Thank you very much 😊 👍
PLEASE why using wosh tool just for clean ?
Hi Reghis, thank you for your question, it's not only just ordinary washing, required 800 psi pressure during washing, that's why using wash tool.
Thank you, please subscribe if possible
Really it's amazing, Excellent...what about install BPV before N/D riser and BOP, and also install TWCV to test X-MASS?.
ECELLENT JOB MAN.
Thank you very much for your lovely comment Mister Ali,
Unfortunately the BPV not shown. I will try make new video to show how to install The BPV on the tubing hanger.
Please subscribe so you'll not miss the upcoming videos
This is very nice. Please can you teach me how to do this type of design and animations?
Dear Udeme Udo, thank you very much for checking this video out, hopefully next time I can share some videos how to make the animation, please subscribe so you won't be miss out he up coming videos k
Thank you very much
Great job bro Can l download this animation?
Thank you very much, please use fairly, please like and subscribe whenever possible :)
highly appreciate this work!.. thumbs up at all👍
Thank you very much for your lovely compliment, please do subscribe so that you will receive another interesting videos
Terima kasih
Very Nice video! regards from México
Thank you for your lovely comment Mr. Victor, an awesome country of Mèxico, glad you are like the video and please don't forget to subscribe
May I download this?
You can download this video as the animation was made by me myself.
Thanks for checking this video out
It is an awsome work bro realy thank you
Thank you so much for checking this video out. Please do subscribe if you do not mind 😉
this design from which company?
Hi @him 69, they are in the middle east, but when I finished and send the animation, they did not pay a single penny for my work hard. So, the animation is mine :)
@@travelexpat2315 why lockring design like that? how to overpull lockring
@@toyol1111111 the design using internal locking-ring style since the wellhead doesn't use lock down screws.
The why to pull over is as same as assemble one but in a reverse way.
Thanks for checking this video out btw
Very nice good job
@Sibtain Haider, thank you very much for coming by to check this video out, please check the other video and please subscribe when possible
Thanks for your sharing, welcome to visit our channel