The CORRECT Way To Fix A Leaking Joint (UNSOLDERING) | GOT2LEARN
HTML-код
- Опубликовано: 28 авг 2019
- Here's a complete guide on how to repair a leaking joint whether it wasn't soldered correctly or it just started leaking in time, this guide will assist you in repairing it the CORRECT way, not the quick-fix way :)
Join my plumbing forum for FREE!
got2learn.freeforums.net/
How to solder the correct way: • How to Solder Copper P...
How to solder in a wall: • How to Solder Copper P...
How to solder with water in pipe: • Soldering Copper Pipes...
Amazon affiliate links to all the products I used in this video:
TOOLS:
Bernzomatic Torch: amzn.to/3s4uF3e
IRWIN 10" Locking Pliers: amzn.to/2SuJSY3
Fitting brush 4 in 1: amzn.to/45ELin6
Flux brushes: amzn.to/3S1xsrK
Utility knife: amzn.to/2U4dKKP
Pencil reamer: amzn.to/2tBuhKW
Fire proof blanket: amzn.to/3tzkcQV
MATERIALS:
Lead-free solder: amzn.to/3ZT6Jzn
Propane gas(Blue bottle): amzn.to/3tpWAOo
Lead-free flux(water-soluble): amzn.to/2XjaYn9
150 Grit Sandpaper: amzn.to/2YbJq6D
DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn't done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!
Join my plumbing forum for free: got2learn.freeforums.net/
As a Plumber who has been doing this trade for 45 years, I give you two thumbs up. Clean joint and all.
👌👌👌 thank you sooooo much Jody!!!
Good job brother, I was a Licensed plumber for 28 years . My mentor was very hard on me but when I realized why I thanked him every time I saw him . I miss plumbing sometimes but being retired at 50 years old feels great .....
🤘🤘🤘
My old curmudgeon plumber gave tough love. He who has leaks buys drinks.
Not many 100% explanatory videos like this. Respect !
I appreciate that! Thanks for sharing ;)
I’ve been doing commercial plumbing for decades and this guy is showing the proper procedures on every video I’ve seen. Some circumstances won’t allow you to get all the water out of the area in question. If this happens you may have to use a slip coupling to repair the leak. Doing this will allow you to cut the pipe near the leak to drain the remaining water. After it is drained you can mark your pipe so you can assure your coupling is centered before soldering your joints.
Thanks Jeff 🙏🙏🙏
Jeff, thanks for providing validation so we amateurs can’t have confidence in the videos.
This guy knows what he’s talking about I’ve been working on pipework for more than 40 years listen to him he’s showing you how to do it the correct way.
;)
How do we know that YOU know what you are talking about?
LOL...sorry...couldn't resist ;-)
Interesting, I usually go for the 'put a piece of tape on it and run away' technique. Might have to add this one to my arsenal.
🤣
Window licker
As a professional hvac tech, this vid has filled in some of the gaps in my soldering education. Soldering has never really been my strong point0 mostly because my teachers never really covered this stuff in this sort of detail. Thanks!!!
You solder your line sets?
Being a home handyman, I noticed that sometimes I could not get the solder to wick cleanly. I was picking up materials at our local hardware store where they have experienced tradesmen who provide invaluable advice. The plumber explained to me that paste flux has a limited life - a few months can make it tougher to work with - and mine was years old. Sure enough, the cheap can of flux I bought was immensely better than the can I had for so many years.
Laco Flux, Sterling solder, Mapp (yellow) gas for your torch. You will be invincible!
Get a tradesman to do it.
Never had trouble with flux, clean , with proper heating……..water, closed system causing steam, or air expansion….
@@blackpine6693 same here and I’m still using a quart of flux I bought in 1996
@@johnlennon1151 what, so they can smash big holes in your house just to fix a single joint and charge you £250 for the privilege? No thanks.
Plumbing is an technical art ! I know a lot of plumbers and they are far from being artists. But I also know a few that are truly plumbing artists, It's so satisfying to see their work.
🙏
Electrician here. Couldn't fix a leak in a sprinkler system I'm installing, and this was the video that showed me how to fix this issue and why it happened. Great show! Thanks plumber!!!
Awesome man, i'm glad I could help out ;)
@@Got2Learn Me too!!!
Both plumbing and cable running is about the simplest thing you could do, other electrical is hard, i think you guys are too overpaid compared to the kind of work mechanics and boilermakers do
@@SH19922x Go fix a hundred shit filled toilets and busted plumbing stacks and you'll change your tune - and clothes. It depends on the job and work location. Dealer mechanics might work fast but they're inside a warm shop. Boiler makers - not the best environment , assuming they're in an actual boiler. But I've worked with many BM, who we not eager to work. So, your statement needs further thought and explanation. I guess your exposure to the trades is limited to RUclips. This video shows a basic repair in an easy to access area - thats not usually the situation. Get out there And bust a knuckle...
Cheers
My father was a master at this. Unfortunately, I never payed close attention and he has passed away. This video and your others have been invaluable in filling the gaps in how this is done for me. Many thanks!
😇😇😇
This is fantastic . As an industrial maintenance technician I always do everything myself . However I have always found it difficult to solder copper pipes correctly . I was having a miserable time with my new hot water heater installation . Your advice saved me countless hours of work . Thank you so much for the help ! God bless ! (New subscriber)
Never say hot water heater ,just say water heater,if the water is hot you don’t need a heater.
You covered everything on how to fix this leak in short and interesting time, thank you!!!! I love how you explain things and the consequences of not following directions.
Thank you so much Dean!!!
Loving the statement " I guarantee that if you've done it right it wont leak " made me chuckle. 👍
;)
Nothing in this world is guaranteed cept death n taxes. Sure as hell not having plumbing leaks. I’ve been doing it for 18 years n still get a leak now n then. Rare but it happens. I have coworkers with 20-30 years experience and same results
Love the way you explained 🙏🏿… Always watch plumbers doing this and think it’s hard but now I get it.
🤜🤛
I am doing house renovations in Southern France. I watch these videos regularly. This one is just perfect. Presentation etc, just the best. Thanks a lot.
Thank you sooooooo much, share if you can, and good luck with those renos!!!
While I don't think I'll ever do this myself, I can appreciate a well made informational video. I watched it all just because it was so interesting :)
🙏🙏🙏
Thanks for a great video! It has been decades since my dad taught me how to sweat pipe. He’s no longer around for questions, and I have forgotten almost as much as I had learned back then!
Thank you from England. Very clear video of 'how to' and thank you for giving the reasons why you don't do certain things and for demonstrating the consequences. It is all a useful learning curve.
You are very welcome!!
Thanks. The tip about wrapping adjacent joints with a wet rag is something I wish I had known a number of years ago. It would have saved me a couple of trips from my isolated cottage to the closest hardware store.
Glad to help!
I thank you for boosting my confidence! I was a little hesitant about fixing a major plumbing repair after our current freeze. I took the time to watch 3 of your videos and it all made perfect sense! I am glad to report no more leaks!
😉😉😉
I served my time as a maintenance engineer at a company in England that produced heat exchangers. There was a lot of soldering and brazing involved in the production of heat exchangers and there was a saying prevalent amongst my peers, and that was that, in both of these processes, "Cleanliness is Godliness". You can be too dirty, but you can't be too clean. This is always number one in my book but doesn't undermine your excellent advice.
Thank you thank you. i fixed an old copper pipe that haunted me for years. and finally now fixed it after watching your vid. it was in a tight no room spot. Your hint on using vice grips to separate clean sand and resolder using wet rags and I used tin foil as backing to stop fires. Really worked! It's great that people like you help people like me.🙂 Good Karma to you.✌
Videos like this are rare! Not videos about soldering, but usefull videos!
Excelent job!
Thank you so much Pero!
EXCELLENT VIDEO! Easy to follow, thorough explanation covering all the principles involved, by someone who really knows what they are talking about. Giving many important details, but just the right amount to enlighten without being boring. Thanks for doing this.
Glad it was helpful!
I retired my torch, after Ridged came out with the ProPress. Haven’t had a leak in years. But you method an theory is true. Never, reheat to fill a void. Master Plumber for 20yrs.
Awesome, thanks ;)
Your details show you are an experienced plumber. Great job!!!
I appreciate that, thank you very much!
No empty talk. Straight to the point. Great shots. Keep up the great work man!
🤗🤗🤗
I wish there was a channel like this for every trade. It would be the perfect maintenance manual for everything. How to fix you car, your plumbing, your electrical, your windows, your roof, your floor, High quality content that covers all the potential errors and their repercussions. What you are doing is amazing. Thank you for all the great work.
That would be sick, let's hope others hop onboard!!!
ChrisFix is a decent channel for car maintenance.
@@TheSignatureK thanks!
Good video, my dad always wiped the excess solder from each joint you would never find a drip of solder on any of his joints. If one ever leaked he fixed it on the spot. The only time one would leak is in tight quarters. People don't take pride in their work. my dad was not a plumber, he was a refrigeration maintenance man. He also knew electrical.
I know I've viewed a few of his videos as I recognize his voice. Always learn or reminded of things every time. He makes youtube the success it is.
So very nice of you :) thank you so much!
His next video will be on open heart surgery and after that on Spelunking on Mars. The guy can do everything and does everything as long as they’re in stock footage for him to overdub
@@gadooooo1 I guess you're thanking him for doing the research for us and putting it in layman's terminology ? Then I should be thank him for that as well. Just about every video I watch of his, I am reminded of lost knowledge and some new tips I've yet seen. As the 'dubbing' Martha would say, "That's a good thing".
This video provided exactly the direction I needed to fix a leaking outdoor shut-off for my garden hose faucet. I had to heat up and remove the old one then prep the copper pipes on either side and install a new one. The best part about this video and the others I’ve begun watching is not only are we being shown how to do something, there is also en explanation as to why it’s done that way as well.
I like being able to do things like this on my own, but being able to do them properly and to code is monumental. Huge thank you for sharing these videos!
Awesome comment, thank you so much Jason, good luck with your future repairs!
my dad was a plumber but always did the work and never taught me anything beyond holding a light. LOL just like he did when working on cars. But I am GREAT at holding a light but now have the confidence to try some simple plumbing repairs.
This is the best I’ve seen, in every way.
- Instructions
- Graphics to illustrate (amazing)
- And lastly how conscientious you are.
Keep up the great work sir. We DIY’ers salute you. 👏👏👍👍
Subscribed ✅
Awesome comment, thank you so much and I hope it goes around the world :)
Got2Learn I’m sure it will. So many cling on to tips and hacks but it’s a breath of fresh air to follow someone like you who so genuinely and generously wants to help. 👏👍
Thank you once again buddy ;)
On large jobs I always test with air pressure. Makes any leak easy to fix.
Great videos.
Seems like a good idea, it might allow reflow of the joint without the water needing to be cleared out and the joint fully disassembled to redo it, as it would be just a continuation. Just would have to find a way to pressurize it though.
I’m a plumber and I still love these videos 👍👍
Wow @Got2Learn @1:45 you literally just taught me something that no other soldiering video ever did. And now I realize why im having so much trouble soldering. THANKS!
You are most welcome!!!!!
You really know your stuff. I have looked at many videos on this as I had the same problem recently, and man you explained it the best and the reason for doing it. I was frustrated, as I always screw up when I have to solder vertical bottom part. I thank you, I followed your explanation and it worked out great. Keep up the good work.
Awesome man, mission accomplished for both of us, don't forget to share if you can, it really helps out, have a great day Ron!
Great common sense is the best teacher.
This video is very well presented and understandable.
Thanks for the information.
Thank you so much Seann!!!
Got2 Learn is the Hickok45 of Plumbing, Great Vids!!!!
Thank you, don't forget to share, it really helps the channel!
I am now more knowledgeable as a DIY home fixer for watching this. Thank you for the video. I have been doing it wrong for part of it and now know the correct way to fix my next leak. Wrapping the other connections to a three way joint is something I never considered.
Thank you so much for your videos. I did my first ever pinhole repair based on two of your videos. Desoldering and this one. I thought I would have to replace the entire t-joint but your desolder video made this fix so much easier. I purchased all the items you recommended including the fire protector. Which, upon inspection, whomever did the previous work in that space did not use one as I could see burned wood. Anyhow, your videos are great. Thank you again.
Yo uare most welcome Adam, glad to hear that it worked out for you buddy, have a good one!
Beautifully articulated. Valuable "crash course" in sweating copper!
Awesome, I love hearing that ;)
Thank you so much for your 2 videos on this, they helped me get the job done first try with no leaks.
Great vid. I’m blown away by the fact that some pipes in some countries are copper
Is it just me that finds it really satisfying to watch the solder run around the joint?
No, it's a thing ;)
It helps to clean the outside of the fitting and leaving a small bead as a structural reinforcement. Do not jostle that leads to a”cold solder joint”. Let it naturally cool as per the video.
Very helpful for upcoming professionals. Enjoyed watching the video! One thing I do is use a dry rag when whipping the hot
Soldier of the pipe makes it smooth and clean to get right back into the fitting
Thank you so much, yeah wiping seems to be a preference thing, I just choose not to do it, have a great day :)
Does the soldier ever complain about getting that hot?
Don't wipe the joint too soon after soldering, if the solder hasn't set fully you can crack the joint causing it to leak.
This is the best description I've ever heard. Thank you!
You're so welcome!!!
Effortlessly explained. Attention to detail is awesome.
Thank you kindly!
Excellent video, thank you for being so detailed and specific. As a doctor, I know how paying attention to the details saves lives, and in your case, you save people time, which leads to saving lives. Thank you Sir.
Yes, thank you very much!
And thank you for your service webmedics
U know that the plumbers are going to hate/love you because many viewers will try to half ass what you are so professionally teaching here Thanks a millon excellent tool
Thank you so much :)
Thanks so much for the video. I’ve been cooling down the solder joints straight away oops also probably putting in too much solder as an insurance gambit. Luckily all my joints have been leak free except yesterdays oops again. Very grateful again showing me the correct way to unsolder and make good the repair….
When I started in the plumbing trade in 1976 I was a apprentice,one of the plumbers would say all you need to know is torch stricker solder paste sand paper, just go get it don’t you use it,after 38 years in the trade i always remembered that.
Excellent video! I'm a beginner and had a couple of leaking joints. Did what you said and it wasn't too bad to fix. No leaks now. 😊
Great to hear!
I am not in industry and probably won't ever be, but your learning is great.
I recently found your channel. I enjoy how your videos are packed with actual information and knowledge on the actual subject.
Thank you for sharing
Welcome aboard and thank you so much for your kind comment Victor, really appreciate it :)
Great information. I was just about ready to do what you said not to do and I decided to watch your video first. You saved me more headaches. What I really liked is that you not only told me what not to do and what to do but you also showed why. When I un-soldered my leaking joint, I discovered that there was an un-soldered path from the front to the back of the joint that probably wouldn't have been fixed by adding solder at the joint. Thanks again.
Nice to hear, yeah, I don't see the point in saying something and not explaining it, glad to hear that you appreciated that ;)
You do an awesome job with these videos, very educational. Thumbs up.
Well I am not a professional plumber but I like to say that I am doing a good job. Even if it is a new or a repair joint I always use the same method :
-clean both parts using grey or red scotchbrite
- brush Rothenberger soldering paste on both fitting and pipe
-heat up the joint and apply only a bit of solder
I let it cool down for a minute and then apply a wet rag.
The soldering paste is grey and when it heats up it starts looking like solder. This is the time when you should apply the solder.
I hope it helps.
This is the most in-depth awesome soldering repair video!!
Awesome Job. Thanks.
Wow, thanks!
Maybe the best instructional video I’ve ever watched!
Wow i'm so honored, thank you so much!!!
I completely agree with the problem of leaving some water in the tube. it first prevents the correct temperature to be obtained. And then, when you are doing the soldiering, the low part keeps cold because the energy you bring is mainly used to evaporate the water. Especially true if the water is constantly renewed because you warm the below tube where it stays !!
This video clearly explains some of the pitfalls that I probably would not have avoided had I just gone forward without educating myself first. Thank you for clearly explaining everything during the demonstration!
I am not a professional plumber but the first major plumbing job I did was to fit a full c/h system with 21 rads in my own 3 storey house. All went well except that when I filled and pressurised the system I had a single small leak at a T joint in the cellar with one leg of the T into a brick wall. Almost the worst possible spot on the entire system. Pulling the pipes apart was not an option in a confined space so, knowing it was not recommended but having no real option other than drain down and dismantle I decided that as I had little to lose I would try to solder it in situ. I am talking 50+ years ago by the way. My torch was a Camping Gaz, butane I think. I heated the joint slowly, I did hear some steamy sounds, applied some aggressive flux, as it was known then, turned up the heat and applied solder.
It worked!
For the next 30yrs until I moved house I checked the joint periodically, it never leaked.
I know I was fortunate but it was well worth the try.
I never had a solder joint leak thereafter!
Thanks for your videos. You taught me how to solder copper before. And today you taught me to unsolder copper. Thanks for the work you do!
Rock on!
First, I wanted to thank you for this and your other videos. Your well explained techniques have helped myself and I am sure many other weekend warriors become better at plumbing by improving skills with your pro tips and techniques. I thought I was pretty good (always got the job done), but now I am much better. I am currently working on an older 3 story Victorian home with mostly copper pipe (changed) and a few runs of the old iron which I can't easily access. It would be great if you could do some videos on older homes and working with old stuff with some tips on replacing inaccessible pipes (possibly with pex ?)and also dealing with old shut off valves. I have not had any luck trying to disassemble most of the older screw valves when the washers let go when you are trying to fix something simple and now it turns into a much bigger project.
Those are all very good ideas, I will start working on those, thank you so much and have fun with your future projects buddy :)
@@Got2Learn do a video on no slip couplings
@@Eastbaypisces I have: ruclips.net/video/ebvqSp-d8-0/видео.html&ab_channel=Got2Learn
@@Got2Learn yea my bad i forgot
I'm a professional plumber, so of course I want to toss in my $0.02 worth: Copper pipe that has water inside is nearly impossible to solder. The water becomes steam when you heat it, and the steam escapes through the joint you're trying to solder, keeping the metal from reaching soldering temperature, and pushing the partially melted solder out of the fitting. One of the best ways to overcome that if the pipe can't be completely dried inside is to leave an open fitting nearby, such as by using a screwed adapter for the last fitting to make. With 1/2-inch copper pipe, it's possible to solder if you can dry out about 10 inches of pipe away from the fitting to be soldered. The bigger the pipe size, the further away from moisture your soldering operation needs to be.
In the first example here--if it's 3/4 or 1/2-inch pipe--it's better to cut the section out and use new fittings--with couplings--to make the repair, because it's so hard to get the inside of an already-soldered fitting clean enough.
There are good tips and correct techniques in this video, but don't ignore the part that says soldering is a skill that takes practice. If you've never soldered copper pipe before, a repair that a pro could do in 10 minutes will be an hour or more of frustration for you.
How about stuffing bread up the pipe to stop dripping water? I think glutinous is best. I’m going to try a bagel. Plain, without cream cheese, onions, tomatoes, or smoked Salmon. The pressure will blow it to the first open tap and the water will dissolve it.
@Aww BS. Perhaps true for many, I will concede that the skill is not easy to learn, and that caution is advised, but the categorical abstinence is a bridge too far.
I just repaired a faulty “professional” installation that failed prematurely. But it took me 5 days, and was very stressful.
Your advice is good for most, but not all.
@@OnerousEthic can not use bread in a closed system. I flare and install flare joints for those.
@@diyjohn9584 … sure you can, if your really worried about bread residue you can flush and refill the system once the work is completed (that’s good practice anyway to remove flus residues etc.)
Most excellent, informative, educational, and teaching, plumbing video.
Thank you so much for this knowledge.
This video legit saved me & my husband! We had 1 tiny pin hole on the cold pipe joint on the shower rough in valve.. we followed these exact steps & it worked like a charm! Thank you!!
Glad it helped, awesome works guys!!!!!!!!!! :)
your channel is a must for all plumbers and DIY guys/girls. Keep up the good work
Awesome, thank you so much Spy, really appreciate all your comments ;)
Very thorough, well organized and great visual aids.
Thank you Jeremy!
Very helpful video. I am renovating my master bathroom and one seam leaked, perhaps from shifting the pipe to fit other fittings and lengths, and broke the seam. TIP! Use a wet/dry shop vac to evacuate residual water in the pipe. Put the vacuum hose end over the pipe opening, squeeze your fist around the end of the hose over the copper to create an air tight seal and vacuum as needed. Be sure to open a nearby valve to allow air to travel with the water. Dry the pipe with a torch for best results.
An absolute must, here's a video I made on this: ruclips.net/video/lNUAX6mJTlA/видео.html
Non professional here that has done a fair bit of pipe soldering. I liked this video. I learned several things even though I've done this many times.
🙏🙏🙏
Your videos are highly informative, very technical, and has helped many DIYers like myself who need this vital information to repair and resolve these issues ourselves. Your instructions are clear, with great advise and technical "know how" to do it right. Your cutaway view makes your explanation invaluable that substantiates the do's and don'ts. You are the best at what you do, as I'm a fan
for life. Keep-up the great work MF (my friend) !!
Thank you very much!
@@Got2Learn i gotta cut the pipe to drain water out, no other way grrr..
The best way is clean off all the flux of the pipe and the fitting doing it you will have no problem at all .
Your video saved my life and a LOOOOOOOOOOOOOOOOOOOOOT of money. Thanks!
😇
I haven’t been working in a trade for almost 14 years due to my injury and watching videos like these gives me nostalgia.🥺
I’ve probable done millions of soldering joints if not more and for sure I had some hiccups in the beginning 🤣
You the # one my friend I fix some things in my house following you directions.
Awesome, glad I could help!
as a journeyman plumber I approve this channel
Lovely, thanks so much buddy!
A little waxing with some flex seal. Dab of silicone aced out
Cool! That remides me on my apprenticeship!
Tehse days I rot away in an office.......
Great video. Checking out other videos since I am repairing existing lines and want to make sure I don't get screwed by water laying in the lines.
SO good of you to post these clips.
Brilliant.
Really building my confidence to do the pipework at my father’s on Monday!
My Plumber let us down 😱
The kitchen fitter is coming on Tuesday for 5 days, so I am now going to have to:
- move the mains stopcock 2ft to the right
- move external tap pipe 3 ft to left (installing compression valve)
- extend cold water pipe feed to boiler - extend pipe 3 ft to right, install compression valve near mains stopcock
- move taps over 2 feet (install compression joints with hot/cold taps)
- install compression joints to the washing machine
Slightly over optimistic for a first attempt, but hey ho.🤞🏼
Awesome, I am so glad I can help you out, and I hope everything goes well for you and your father!
Recommend using dry rag (not wet) to remove the molten solder... as soon as a wet rag hits it the solder hardens (not the objective).. wear golved to avoid burns. great video
Great point!!!
Whenever possible check for leaks with compressed air. Makes fixing leaks so much easier. Well worth it
100%
Great videos. I've been soldering copper pipes in domestic plumbing for years but I've learned some valuable tips from watching your videos. Thank you :)
🤗🤗🤗
Keep up the vids they are needed for a lot of work I see out there
Cheers
Ain't no plan on stoppin' soon brotha, thanks man :)
VERY GOOD TIPS IM NEW TO SOLDERING ,THIS HELPED ME ALOT THANKS.👍👍
Glad I could help out :)
you really have a great style to your videos, very helpful and straight to the point. The more I watch the more RUclips is recommending to me
🤩🤩🤩
Your videos is very comprehensive
Thanks a lot Rocky!
You are so smart I love you now I can think about soldering without vaporizing my flux.
Awesome, never enough love I guess :)
I used your tips yesterday with wiping the extra flus and using the tin flux you would think I was soldering for 20 years thanks for the help
So I started out wanting to see if my old skills were tucked away inside to fix a shower valve, and I'm learning things those who showed me didn't tell me. Plus, I'm now starting to get ideas for building some other non-plumbing things with the things you're teaching here. Thanks.
:))
Excellent! Detailed, reasoned - but not overexplained - with nice visual examples
🤘🤘🤘
So I'm not the only one that had to learn this the hard way
Great vid, I just have one suggestion. The prep of the pipe has a lot to do with improper joining. What I'm referring to is when you sand the pipe, a lot of people make the mistake of going around in a circle. But if you go parallel with the pipe and create straight lines, the solder has a easier path to flow versus going over the miniscule ridges or "whoops" like I call them. Kinda like a dirt bike at a race track. Good luck
🙏🙏🙏
Tt
they never thought me this in HVAC, good tip.
Shit, that's a great tip!
Awesome video! I like the way you show the "right" way to do it. Learning these methods makes you a Craftsman and separates you from the others.
😉😉😉
Thank you!
I was getting frustrated with my solder joints leaking (trying to add a "T" to an existing cold water line). I kept re-fluxing and re-soldering (the wrong way) and it wasn't getting any better.
Then I watched your video.
I spent a few minutes removing the T (using your vise grips/hammer technique), sanded the insides and outsides as well as I could, re-fluxed, refitted, and re-heated. It took the solder perfectly the first time and I haven't yet seen a leak.
I didn't know that about "not overheating the joint". I think that's probably what caused my original failures. When I disassembled the joint I noticed that there was bare copper inside the T where there should have been solder. I suspect the flux boiled away, as you cautioned against.
There's definitely something to be said for doing it the right way the first time.
🤘🤘🤘
Leaks happen bro, not often but once in a while. When you've completed 100's of joints it hard to gauge that odd one. Sometimes you forget to tighten that odd compression joint. I only really dry test gas lines. There's no second chances when safety is critical. Any plumber who tells you they haven't had a leak is a liar 😜.
Keep up the excellent work bruh 👌
I agree with everything you said ghost, if you don't want any leaks, don't go to work, cuz it WILL happen one day or another.
@@Got2Learn Tru dat bro, desoldered joints which a reformed are usually actually stronger. As the joint has been coated with solder (tinning).
Your videos are looking super pro bro. Really super with the editing & CGI, bravo 👌.
Thanks so much ghost! Yeah I want to do this type of editing in every video from now on, I am getting a lot of positive feedback from that, so it can only get better from now and on, :)
Ha! And always, the joint that leaks is one of the first you did, right at the back of the cupboard behind all the other pipes you've just put in! Quote from my plumbing tutor many years ago: "ALWAYS check your joints, they're like pretty women, turn your back & they are trouble.!"
@@theondebray leaks happen especially when you have apprentices on hand. We've all been there, it was us creating devastation back at the beginning. Heck, sometimes you just have one of those days when you've done an install. By the end of it you just want to get the hell out and hey presto Mr leak shows up 🤷♂️
Another great video as usual my friend, always great explanation, great production, great lighting, and we're going to hunt down that loser that gave it a thumbs down! He can give your video all the thumbs down he wants, HE still doesn't have the silver plaque. Looks like you're headed to 500k!
Wow jeff, thank you so much! What he doesn't know is that he's totally wasting his time and my channel average for thumbs ups and downs is 94% to 6% so, he he'll haveto do a lot of overtime to even get it to 6.1% hahaaaa, it's ok though, they fuel me to maje more videos and that's what I need, cheers man!!
Your videos and graphics are really good at illustrating what you are talking about. And you are very thorough about giving all the required information. Great video, thanks for posting.
Thanks a million Jeff, have a great evening 🙏🙏🙏
@@Got2Learn I forgot to mention, I had just come in from using some of you information. I'll finish the job tomorrow. The last time I did any of this was 20 years ago. I did pretty well. But I could have done better after seeing your vids lol Thanks again.
@@jeffpurtell5676 🙏🙏🙏