Fixes Harman Kardon Aura studio does not sound treble - Repair And Rework
HTML-код
- Опубликовано: 5 окт 2024
- Fixes Harman Kardon Aura studio does not sound treble - Repair And Rework
===========================================================================
Thank you for watching our videos, or subscribe to the channel to update the latest videos, like and share to support us - love you.
Click here : goo.gl/SA9G6x
If you need technical support, please connect zalo:
IMPORTANT Update, if your speaker sounds broken at high volume it means the membranes of the speaker are broken not the board, unless you are switching the logical board for other reasons, you don't have to remove it to fix the membranes, just remove all screws from the bottom and pull the electricity port like on the video before pulling up the whole thing, it was hard at first, but with the right pressure the cloth part will come off exposing the membranes I'm talking about.
I successfully repaired the membranes using simple glue and tissue-a method widely discussed in various DIY speaker membrane repair videos. However, I accidentally damaged the flexible cable that controls the touch sensors while removing the transparent part of the speaker. It dropped slightly when I flipped it after unscrewing everything from the bottom. So, please be cautious and do it slowly like in this video, without trying to lift it so much.
please give it a try to fix the membrane of your own speakers if that's the issue, it sounds amazing again.
I also managed to bypass the on/off touch sensor I broke by directly routing a cable out. Now, I'm enjoying great sound again, though it's a bit less aesthetic.
Cheers! Fantastic video and best of luck to everyone attempting their speaker repairs. It was an enjoyable experience, even though my wife is slightly annoyed, haha!
하만 카돈오라스튜디오2 수리가능 한가요?
Great Video! Awesome! Congrats!
Do you just jumped de Broken loud Speaker?
I also wonder the same thing. and opening it was a great chance to remove the black tape left on the center of the inside of the speaker
How did you remove the plastic cover around the mini speakers? It was too hard for me to remove even after taking out the screws at the bottom
also had the same problem but made sure all screws were out even one that was very hidden then with the right pressure the cloth part and the mini speakers cover also came out.
my problem was broken membranes with was a surprisingly easy fix with normal school glue and tissue (FOX lem for Indonesians )
I have no idea what he did to the broken speakers in the center but it seems like it worked.
thank u so much
I recently bought 2nd hand aura studio, was working fine for a week or so, but today I have no sound whatsoever, it's connecting by bluetooth from phone or TV but no sound at all, also I checked by AUX and same thing no sound.
When I'm turning ON or OFF Aura also there's no notification sound.
Any ideas where's the issue ?
i have the same problem.. help please!!
@@MrChino5 try to reset speaker by holding "source and power button" then switch off and disconnect all power supply cables for a while.
I did that and after I switched back, it start working again.
@@arastv9896 thanks man
I tried that, but nothing pass, no sound
@@arastv9896 where is the source button?
Mantap broo
Please answer.
How many omh resistor you put?
Thx...
2omh or 4 omh all ok
@@repairandrework ok.
Thanks
@@repairandrework how many wat?
I'm fixing this speaker too. I found small speaker problem condition so bad. But speaker type not clear and read. Is that 2 ohm 5 watt correct??
make sure your problem is not the membranes of the mini speakers are broken is hard to see the crack but after some pressure you will see them if they have any, also very easy fix just youtube fix speaker membrane on youtube, managed to get the full sound of my aura 2 back.
My Aura doesn't sound at all(bluetooth, aux, optical), mode and volume control buttons work normally... Is it the same cause?
i have the same problem!! help please!!
So the bottom when u pull the rubber thing when putting back don't need put like glue or anything?
on mines not really necesary but you can if you want.
You left the tape inside where the light is. Please remove that. 🙈😅
Qual modelo desse capacitor que usou estou com mesmo problema
é um resistor, coloque um com o mesmo valor do alto falante que estiver queimado
B biết pal mất âm thanh loa bass k
Aura2 của em mở to bass là rè thì bị sao ạ
Did you film this in a pet store.
mua loa ở đâu bro, nhà cũng có con này bị rách màng mấy con treble mà ko biết đặt mua ở đâu để thay
Mình liên hệ ae cùng ngành để lấy hàng tháo máy , còn mua thì ko có loại chính hãng chỉ có tương đương . Bạn có thể tìm google loa 4ohm 45mm nhé.
Hello, my speaker is working big but not small, can you help
do they make any sound at all or just sound distorted at high volumes? if so might be the membranes which is an easy fix with glue and tissue... just youtube the DIY way to fix membrane speakers. best of luck to you and all trying to fix the aura.
Alo anh có nhận sửa ko ạ
You have line ID?
man, how to reset aura studio 3 ?
Cho mình hỏi mua loa treble đó ở đâu để thay vậy ạ
Không có mà thay đâu,ông này cũng chỉ câu trở vô thôi lấy đâu treble mà thay
My Harman Kardon aura studio2 has problems too.
Why does every single person play that song every single review 🤪🤪🤪
Cho xin sđt bạn😊
A ơi fb a là gì v
Làm thế nào để liên hệ vs anh ạ
Mình hiện ko có ở Việt Nam! Nên chỉ hỗ trợ được về kỹ thuật thôi , bạn xem facebook trong mô tả nhé
Mình có con này nghe nhạc nó rè rè
Cho em sdt để liên lạc a ơi .em có cái loa bị rè
Zalo trong mô tả nhé bạn
Which language is this Taiwan, or Indonesia
Alamat mnah ituh bua servis
Dia orang gunung kelud