I found out that for the first application you use it as a spray wax on a dry panel it last longer . After that first time you use it with the car wet and boom . Love this stuff
@@user-pv5no2wq3u I’d say more like monthly. Just keep an eye on the paint and waters behavior..beading, sheeting etc..you should be able to tell if you’d need to apply again.
I love this stuff. I recently gave Superior Products Formula 4 Wax a try but didn't like it all. It left a film that was hard to remove. I'll stick with TC from here on.
I have almost a gallon of it just sitting because I bought cause so many people ranting about it and I would rather use chemical guys speed wipe than that formula 4
Formula 4 will streak if you use it like a regular spray wax. It’s meant to be sprayed on to the surface and rinsed off afterwards. Otherwise it will get hazy and streak on you. Tech582 is where it’s at!
Hey thanks!..I have a set up vid on the channel too..check it out if you haven’t already..no future plans as of right now..do you have a detail set up too?
I used Adams graphene detail spray and hated it…it became sticky and hard to buff off even as a drying aid. Bead Maker is my go to but tends to attract dust and pollen a bit…would you say this is even better as far as protection and durability than Beadmaker? I just love the insane gloss and pop i get from Beadmaker with my Granite Crystal Metallic paint color
Hey! I’ve never tried Adams Graphene detail spray before. I like Bead Maker a lot. I think Its polymer based vs Tech choice which is Si02 based..this makes me think that tech choice will last a bit longer in terms of protection. I could be wrong but I love both products!
@@cleancarchris awesome i think im gonna grab some since my truck doesn’t have a true ceramic coating on it yet anyway. I also was looking at the 3D ceramic detail spray or theyre Bead it up spray. Which would be like bead maker. I just know bead maker is really easy to work with even if you have to in direct sunlight panel at a time. I think tech choice is worth a try.
@@Orr_s I’d say it’s worth a try. The durability is not meant to be long tho..I’ve been using it for my maintenance clients once every month or so. Let me know if you like it or not!
I’ve been using it for about a year now and I love it. I also use it as a drying aid at 1:1.
I hear ya! I’m loving it too. 1:1 is where it’s at!
Do you mean mix 1 part water to 1 part product vs. using it straight?
@@MrEric0822 yes you got it! 👍🏻
I found out that for the first application you use it as a spray wax on a dry panel it last longer . After that first time you use it with the car wet and boom . Love this stuff
Thanks for sharing this..It’s a great product for real 💯
Thank you! Good vibes only!!
You’re welcome and yes!..good vibes all day! 💯😎
Looks awesome , will definitely pick this up . Thanks for posting . Just subscribed
Hey! Thanks for subscribing 😃..yes try it out..it’s good stuff!
On a clean rim. I've used Tec choice as a spray and rinse protectant. Saves time. Also, it adds some protection.
For sure, it’s so versatile..I do the same sometimes..thanks for commenting 👍🏻
Yrs ago that was one of drying aids back in the day and as far as I'm concerned it still is!!!!
I’ve been liking it. Did you like it too or not?
Yes I love it one oh the best ones
@@carlosautodetailing114 Ok I hear ya! 👍🏻
Tec582 is king
That’s what’s up 👍🏻
I'm going to add this to my list
Yea man, it really is worth adding to the arsenal
It's Kevon from🇬🇾, Lovely video clean car Chris . Quick question, if i wash a car like every one week or 2 weeks can i use the product everytime ?
@@user-pv5no2wq3u I’d say more like monthly. Just keep an eye on the paint and waters behavior..beading, sheeting etc..you should be able to tell if you’d need to apply again.
@@cleancarchris ok I understand
@@cleancarchris appreciate that.
Gonna check it out
It’s worth a try 👍🏻
I love this stuff. I recently gave Superior Products Formula 4 Wax a try but didn't like it all. It left a film that was hard to remove. I'll stick with TC from here on.
I hear ya..that left over film left by some products is the worst..I enjoy using TC for sure. Thanks for commenting!
I have almost a gallon of it just sitting because I bought cause so many people ranting about it and I would rather use chemical guys speed wipe than that formula 4
@@adamvalenti3521 I hear you. Yea man you gotta use what works best for you..so many good products out there..
Formula 4 will streak if you use it like a regular spray wax. It’s meant to be sprayed on to the surface and rinsed off afterwards. Otherwise it will get hazy and streak on you. Tech582 is where it’s at!
@@elonsus9747 582 all day 💯
TEC582 is the best brother. I use it 1:1 as a drying aid. Smells like Bananas lol
I’m loving it. Bananas LOL..1:1 ok copy that 👍🏻 Respect for the comment!
@@cleancarchriswhat hose reels do you use
@@Eric-vy7sz MTM for water and Dewalt for air
Great video Chris! Good Vibes 👍
Interesting product. I think you meant to say, "A little goes a long way." 😀
LOL..you are absolutely right! 🤣
Love the truck 👌🏼 awesome set up. Any future plans or keep it as is?
Hey thanks!..I have a set up vid on the channel too..check it out if you haven’t already..no future plans as of right now..do you have a detail set up too?
How about vs Bead Maker in ur opinion?… i thinking to use this One over Bead Maker
Yooo, personally I find myself using Tech Choice way more..thanks for asking 👍🏻
Pineapple juice for the win
LOL! For real! 💯
LOVE the smell
What kind of water do you use in that tank? Is it hard water or filtered? Ty
Hey there it’s filtered
I used Adams graphene detail spray and hated it…it became sticky and hard to buff off even as a drying aid. Bead Maker is my go to but tends to attract dust and pollen a bit…would you say this is even better as far as protection and durability than Beadmaker? I just love the insane gloss and pop i get from Beadmaker with my Granite Crystal Metallic paint color
Hey! I’ve never tried Adams Graphene detail spray before. I like Bead Maker a lot. I think Its polymer based vs Tech choice which is Si02 based..this makes me think that tech choice will last a bit longer in terms of protection. I could be wrong but I love both products!
@@cleancarchris awesome i think im gonna grab some since my truck doesn’t have a true ceramic coating on it yet anyway. I also was looking at the 3D ceramic detail spray or theyre Bead it up spray. Which would be like bead maker. I just know bead maker is really easy to work with even if you have to in direct sunlight panel at a time. I think tech choice is worth a try.
@@cleancarchris the technicians choice being sio2 will still have UV protection in it as well right?
@@Orr_s I’d say it’s worth a try. The durability is not meant to be long tho..I’ve been using it for my maintenance clients once every month or so. Let me know if you like it or not!
@@Orr_s yes it will 👌🏼
Yo breddah ! Which generator yuh use ?
Champion 4500 Inverter
@@cleancarchris I just bought a 5300/4250 champion you think that’s good ?
@@keyzopendoorz123 sounds good to me
@@cleancarchris you my go to , dead ass
what wash mitt/pad is that?
Flat out from Autofiber
thanks bud @@cleancarchris
@@SNieX0 no problem 👊🏼