Now HOW do you get the OLD CARTRIDGE OUT!!!! I just got my New hinge and have tried EVERYTHING to remove the OLD spring cartridge. This thing is SO TIGHT, the 2 screws located on the hinge, once I removed those, it snapped right their...ITS IN THEIR....ANY Tricks??
Got it out....Now this Higne is Pissing me off...I know I am doing somehting wrong, I am a cook, lets face it...This isnt my Fortay!!! Im trying...when put top part of hinge back together I cant get the hinge to swivel
Sometimes they don't have the extra bottom piece. Then I panic. Also one time I couldn't get the hinge out of the door itself. Ordered a whole new door. It was glued into the door
im putting up a video on how to get out Stubborn hinge packets that are foamed into the door and stuck. im tring to get it put up today. hopefully up in a few hours.
ill try to find it now for u. u can also go to my channell and use the " search " feature and type in " true door hinge ". you can do search on individual channells.
@joe weiman throttle bottle5 months ago i use a pair of stiff heavy gauge 2" wide putty knives, drive them in under the hinge mount tab, then drive something between them, thick steel blade is key to not smashing the door up. once it's moved some, I grab my "flat pry bar" and hook the 90-degree end under under the hinge edge and hit it with a hammer to drive it out. I don't do any "prying" with it, you'll just smash/crush the door. **I do this while holding the door between legs, hinge at top facing away from me, with clear path of trajectory when the hinge goes flying lol yeah the prybar is what someone doing construction/demo/nail pulling would use, I love mixing tools from all the trades around.
One of the most common True Repairs. All day long ! u can walk in any restaurant with true preps and find Busted Spring hinge paks all day long. #1 First thing i allways check on preps. u close one door and the other door pops open. Really important in summer time.so the boxes can get to temp doors hanging open will cause all kinds of problems. Good Door Gaskets and new spring hinge kits all ways a first must. kids allways open the doors too far open and the kits just bust. Bad Design By True ! Good For me and u.
i Allways Take the Doors Over to the Sink and Give the Bottom of the Door a Good Scrubbing With Hot Soapy Water and the Steel Scrubbers in the Sink. it jJust takes and few minutes.
easy money for you. good job. Thanks for making videos.
Now HOW do you get the OLD CARTRIDGE OUT!!!! I just got my New hinge and have tried EVERYTHING to remove the OLD spring cartridge. This thing is SO TIGHT, the 2 screws located on the hinge, once I removed those, it snapped right their...ITS IN THEIR....ANY Tricks??
Got it out....Now this Higne is Pissing me off...I know I am doing somehting wrong, I am a cook, lets face it...This isnt my Fortay!!! Im trying...when put top part of hinge back together I cant get the hinge to swivel
great video,the only thing is you missed the s.steel square washer.tin tirin.
Thanks
Sometimes they don't have the extra bottom piece. Then I panic. Also one time I couldn't get the hinge out of the door itself. Ordered a whole new door. It was glued into the door
im putting up a video on how to get out Stubborn hinge packets that are foamed into the door and stuck. im tring to get it put up today. hopefully up in a few hours.
@@OcRefrig WHERE is THAT VIDEO
ill try to find it now for u. u can also go to my channell and use the " search " feature and type in " true door hinge ". you can do search on individual channells.
ruclips.net/video/K5rRfELP9yg/видео.html&app=desktop
using a torch to warm door & melt bond. about 12:00 at video
@joe weiman
throttle bottle5 months ago
i use a pair of stiff heavy gauge 2" wide putty knives, drive them in under the hinge mount tab, then drive something between them, thick steel blade is key to not smashing the door up.
once it's moved some, I grab my "flat pry bar" and hook the 90-degree end under under the hinge edge and hit it with a hammer to drive it out. I don't do any "prying" with it, you'll just smash/crush the door. **I do this while holding the door between legs, hinge at top facing away from me, with clear path of trajectory when the hinge goes flying lol
yeah the prybar is what someone doing construction/demo/nail pulling would use, I love mixing tools from all the trades around.
Great video. 👍🏼
Bear Downs thank you Bear.
👍👍 thumbs up Dave
One of the most common True Repairs. All day long ! u can walk in any restaurant with true preps and find Busted Spring hinge paks all day long. #1 First thing i allways check on preps. u close one door and the other door pops open. Really important in summer time.so the boxes can get to temp doors hanging open will cause all kinds of problems. Good Door Gaskets and new spring hinge kits all ways a first must. kids allways open the doors too far open and the kits just bust. Bad Design By True ! Good For me and u.
Nice. The bottom of those doors were nasty
i Allways Take the Doors Over to the Sink and Give the Bottom of the Door a Good Scrubbing With Hot Soapy Water and the Steel Scrubbers in the Sink. it jJust takes and few minutes.
OcRefrigeration,Hvac & Electrical. I agree. I clean the doors up too. Only time they get the chance
This video is off the hinges!!!
if the hinge assembly didnt have any plastic ocmponenets it wouldnt break
now I know how .
Yeah right, that top hinge won't come out without a blow torch or a crane, its glued in by the insulating foam, typical of garbage like True coolers.