Fantastic video! Saved me a major headache after I made the mistake of pushing update Klipper in Fluidd. Little did I know the Elegoo Klipper is not the same. Only place online I was able to find a fix. Only suggestion: the part about the sudo fix in the moonraker script was not clear. Took me a few minutes to realize you had to mc into the files and go to that location and execute the command.
Worked great 🙂 First tutorial that helped get my broken N4Plus back to life, after spending hours and hours with other instructions. And it is so simple
You are literally a life saver! Thank you so so so much ;0; I’ve been trying to fix my issue for hours and ur video got my printer back up in 30 minutes XD. Thank you so much man!
You saved me, thank you, when trying to install moonraker timelapse I don't know what I did and well it went downhill from there.. another tutorial video would be great for that.
Without internet your only option is to reistall the firmware on the emmc card. The card needs to be removed from your printer. I have already created video about it. Pls check the video on my channel bevore you try to do it.
So, I got here because I accidentally uninstalled Klipper, but i did not delete the config folders. It has been hours from then and I was wondering if it will still work
as of 3/1/25 tried this and it wouldn't uninstall, just kept freezing in the putty prompt. went to Elegoos website and downloaded the software pack. unzipped it and put the fix folder on a usb. plugged it in and turned the printer back on. it did its thing and now the printer is up and running again as normal. printer is on V1.2.2.64
HI, thanks for perfectly description, but for me still no reason. After long reboot system on the screen feeze "Disconnect". I try this steps 3x, every looks OK. I must create folded "printer_data" manually and still is empty, is this OK? Can you look contents of each important folders, please?
This at least got me back to working after resolving a few errors in the printer.cfg coming up. It feels like the printer doesn't print the same as before but maybe that's just my imagination. I am ordering an EMMC card to flash it back to factory.
Thank you. It solved 98% of the problem....Now there's just one warning I cant get rid off: "Server configuration error: Error Reading Config: '/home/mks/klipper_config/moonraker.conf' Loaded server from most recent working configuration: '/home/mks/klipper_config/.moonraker.conf.bkp' Please fix the issue in moonraker.conf and restart the server." - Has anyone else seeing this too?
hello i followed your complete instructions and got the printer back to be able to print and no issues but the fluidd install will not complete in kiauh i am getting cp: cannot stat '/home/mks/printer_data/config' : no such file or directory
Your are my hero! Could finally "unbrick" my "bricked" Neptune 4 Max. Everything is back to normal. Kudos! And thank you so much!!!
Fantastic video! Saved me a major headache after I made the mistake of pushing update Klipper in Fluidd. Little did I know the Elegoo Klipper is not the same. Only place online I was able to find a fix. Only suggestion: the part about the sudo fix in the moonraker script was not clear. Took me a few minutes to realize you had to mc into the files and go to that location and execute the command.
Hello, thanks a lot for the procedure ! It saved my day after a big issue of updating. Many thanks
Worked great 🙂 First tutorial that helped get my broken N4Plus back to life, after spending hours and hours with other instructions. And it is so simple
Glad it helped
You sir are a ledgend! I just spent 5 hours trying to revive my printer after attempting to install KAMP. This did the trick
You are literally a life saver! Thank you so so so much ;0; I’ve been trying to fix my issue for hours and ur video got my printer back up in 30 minutes XD. Thank you so much man!
You just saved my evening!!!!!! Thanks for fixing my printer :)
thank you very much for your help !! you saved my printer !! trully thank you !!!
Obrigado, esse video me salvou depois de uma atualizaçao mau sucedida a impressora nao queria ligar mais! Voce me ajudou a resolver o problema.
You saved me, thank you, when trying to install moonraker timelapse I don't know what I did and well it went downhill from there.. another tutorial video would be great for that.
how can i do if i don't have the printer connected to internet? so i can't retrive the ip of the machine ?
Without internet your only option is to reistall the firmware on the emmc card. The card needs to be removed from your printer. I have already created video about it. Pls check the video on my channel bevore you try to do it.
So, I got here because I accidentally uninstalled Klipper, but i did not delete the config folders. It has been hours from then and I was wondering if it will still work
as of 3/1/25 tried this and it wouldn't uninstall, just kept freezing in the putty prompt. went to Elegoos website and downloaded the software pack. unzipped it and put the fix folder on a usb. plugged it in and turned the printer back on. it did its thing and now the printer is up and running again as normal. printer is on V1.2.2.64
its also works if the printer doesnt boot thankyou for the help man
You saved the day!
HI, thanks for perfectly description, but for me still no reason. After long reboot system on the screen feeze "Disconnect". I try this steps 3x, every looks OK. I must create folded "printer_data" manually and still is empty, is this OK? Can you look contents of each important folders, please?
Hi, please check the access rights to the folder. Maybe there is an issue with access rights.
i cannot find the repari package for the firmware on elegoo support page con you provide the exact link
Sure. saas.bk-cdn.com/t/c45e7f57-b66a-4f11-895e-906d83ec6b4d/u/768b2550-d057-42ca-9898-14db7c7d10db/1706167685402/NEPTUNE%204%20MAX%20-%20APP_V1.2.2.65-UI_1.2.12-20231225-EN.zip
how do you get to the blue screen
Do you mean the printer display?
when you login to putty after mks and the password let it do it thing then type mc then enter
This at least got me back to working after resolving a few errors in the printer.cfg coming up. It feels like the printer doesn't print the same as before but maybe that's just my imagination. I am ordering an EMMC card to flash it back to factory.
Hi, this works on neptune 4 pro?
It should but there will be different config files.
u mean the config.cfg? Where I get it?
Thank you. It solved 98% of the problem....Now there's just one warning I cant get rid off: "Server configuration error: Error Reading Config: '/home/mks/klipper_config/moonraker.conf' Loaded server from most recent working configuration: '/home/mks/klipper_config/.moonraker.conf.bkp' Please fix the issue in moonraker.conf and restart the server." - Has anyone else seeing this too?
hello i followed your complete instructions and got the printer back to be able to print and no issues but the fluidd install will not complete in kiauh i am getting
cp: cannot stat '/home/mks/printer_data/config' : no such file or directory
Hi, just create the folder manually using the commmand mkdir /home/mks/printer_data. After that install fluid.
bonsoir il me note sa mkdir: cannot create directory ‘/home/mks/printer_data.’: File exists comment faire merci
@@lubitechchannel
@@PlanquartMarc ply try chown -R mks /home/mks/printer_data
@@lubitechchannel il reste bloquer sur le système et en cours de démarrage veuillez le faire plus tars
et sur l interface il me note klippy n est pas connecter