Brick Wall Pattern Cutting Board
HTML-код
- Опубликовано: 25 сен 2020
- How to build a Brick Wall End Grain Cutting Board. (Step By Step Process) DIY brick wall pattern cutting board. Please hit the RED SUBSCRIBE BUTTON & THUMBS UP. Please leave a comment below or a picture of a cutting board you have made. Welcome to Wheelz woodworking Ihope you enjoy the video. Thanks I appreciate your support
Wow beautiful boards
Thank you so much 😊
Wow! Very nice. This video is my favorite for a brick pattern board.
Bravo! I'm a retired Bricklayer long time woodworking hobby, planning on doing one of these boards. Fine work my friend.
Cool looking boards.
Thank you Carson. Glad you enjoyed the video.
That is one cool looking cutting board.
Thanks Jordan I had a blast making then
Great video and beautiful board. I love the smell of padouk when cutting.
Great video and craftsmanship. I love that you ran the end grain board through a planer. Most will say that it is too risky and may cause chip out and damage the board and the planer. I run end grain boards through the planer all the time but glue on a edge grain board on either side as a sacrificial board and then just use the table saw to cut it off when I am done plaining. Keep up the great educational videos!
Enjoying these videos and hello from the UK .
Awesome.. Thanks for the support. UK that pretty cool 👊🏻
love it, inspires me for a spring project
Great job, Chad... beautiful board...
thank you for the kind words Barry.
great work
Thank you
Awsome work brother . Thanks for your detailed video
Glad you liked the video. Thanks for watching. 🤗👊🏻
Beautiful board, brother!
Subscribed an shared. Absolutely beautiful piece. I love making the brick effect boards. God bless Luke 14:2
Thank you so much Kristiopher I’m glad you liked it. Thanks for your support 🙏
I agree with Kristopher K beautiful piece
Awesome
I agree with Kristopher K. Came as a guest left as a subscriber. SUBSCRIBE AND SHARE
Great video chad
Awesome build. just subscribe after watching this
Awesome thanks for the support and thanks for watching
Great video, a bit better mic would help to hear a bit better for us hard of hearing. Fantastic board.
Thanks for the kind words. I'm new to making RUclips videos so I'm still learning. Thanks for the great feedback.
BOOM!
Thanks for watching 😊🙏🏻
EPIC cutting boards
Thank you 😊
@@ChadPalmer your welcome
EXCELLENT WORK. CLEAN AND BEAUTIFUL
Thank you Miker 😊👊🏻
Padauk wood with the curly maple looks gorgeous.
I’m glad you like it. Thank you 😊👊🏻
Hi Chad, I'm watching you in Portugal and learning so much, thanks for your help. Great job!
Thanks for your support and I’m glad your enjoy it 🤗👊🏻
Juntos somos um that is so cool your watching from Prtugal. I'm in Montana. Chad where do you live
So cool your in Portugal watching I'm in the USA and I believe Chad is Canada. This truly is amazing. Woodwork friendships world wide
amazing work Chad keep it up!
Thank you so much will I appreciate your support & thanks for leaving a comment
Great color selection on a great board...!!
Thank you so much I’m glad you liked it 😊
Beautiful great work
Thank you 😊👊🏻
Cool :)
Thanks Craig :)
Just watched your other cutting board video as well. Once again great job
Thank you 😊👊🏻
That board looks gorgeous. I think I should attempt to make a brick wall pattern.
I’m glad you enjoyed the video if you have any question please reach out and leave a pic
Brick wall pattern looks so neat looking. Keep it up Wheelz
Thank You Tyson I’m glad you enjoyed
great build nice color and wood choice
Thank you glad you enjoyed
@@ChadPalmer Keep it up my woodworking friend :)
WOW. Looks beautiful
thank you Joyce. i’m glad you liked it 😊👊🏻
EPIC Boards,
You are a Pro! I love watching you work. You make everything look so easy.
Thank you Caitlin definitely not a prob but always learning . Glad you liked it
You do make it look easy. Keep it up
Great job. I just watched your other end grain cutting board video also. Keep it up
Thank you I’m glad you liked both of them😊👊🏻
Good wok Chad these came out beautiful. Padauk and curly maple looks nice
Thanks Graham. Glad you like it :)
Absolutely incredible. I’m shocked your channel doesn’t have more subscribers! You do excellent work.
Thank you so much. I’m new to making RUclips videos. I’ve been woodworking for a few years now but only making videos the last 4/5months or so. I’m really glad you liked the video and thank you for your support 😊👊🏻
I agree with Matt. everything he said is correct. keep it up
I agree with Matt H. This is incredible work. I'm sure making videos is a lot of work but keep with it for a newer youtuber this is absolutely incredible work
That is a great looking board, and you are a good teacher. It looks like the 'bricks' are almost square, and it really looks nice.
Sweet. Great job Wheelz
Thanks will :)
awesome :)
Thank you 😊👊🏻
nice
Thank you Cafe Noir 😊
This is beautiful well explained put together video.
Thank you glad you enjoyed 🤗
Hey Chad..... just subscribed. I have watched many cutting board videos. What made yours stand out was that you gave the dimensions to the project as you were going. MUCH appreciated. I look forward to seeing future projects.
Awesome thank you so much Corey I’m glad you liked it thanks for the support. It means a lot when people leave good or bad comments so I can learn from it. Thank you 😊👊🏻
Wow. Great vid with excellent explanation.
Glad you liked it!
WOW excellent video. Hello from Hawaii. Are you in USA or Canada ?
Thank you I’m glad you enjoyed the video. My shop is in Canada 30 min outside Beautiful Vancouver British Columbia. I bet Hawaii is gorgeous right now
@@ChadPalmer Ive never been to BC i heard the mountain views are gorgeous. You have lots of black walnut out there don't you.
Beautiful work. Nice colour choice
Thank you Siskel
Thanks for the informative video, you've got real talent
Thanks Warren G. Glad you enjoyed the video 😊👊🏻
Incredible beautiful work
Thanks Martin I had a blast making the brick wall cutting boards.
Wow excellent work Chad with good explanation. Keep it up
Awesome glad you liked the video and thank you for watching
I am an Italian maker, congratulations for the skill in both execution and explanation, I would like to know where you bought the yellow piece of the circular saw and if it is magnetized. Thanks
Thank you so much Francesco I’m glad you liked it and I still have so much room to leant and grow. Yes it is magnetised and I believe I bought it at KMS tools. I know I’ve seen them on amazon as well. Thanks for your support
So cool. This was a excellent well put together video. Beautiful shop BTW!!! :)
I'm glad you enjoyed the video and my shop is my home away from home :)
Beautiful work
Thank you Thomas
Fantastic channel. Liked and subbed - great stuff Chad!!
Thank you so much for the support and I’m glad you like the channel 😊
Great work! Do you not have issues putting endgrain boards through your planer? I get tear out every time I’ve tried.
I do it all the time BUT I take really I mean REALLy shallow passes. You only seen 30 second in the video but I probably spent 15 or so min with lights passes.
Good work Chad
Thank you Sheila
@@ChadPalmer no prob keep it up
Wow great video wheelz this came out nice with good color choice
Thank you 🤗
This was one of the nicest woodworking videos i have seen, and loved the way you narrated it! Great channel, love it!
thank you so much that really means a lot i’m really glad you enjoyed it. thank you so so much for your support 😊👊🏻
@@ChadPalmer yeah mate its amazing stuff, I'm doing GCSE DT and this is exactly the sort of thing i love making and watching
that’s awesome i’m glad you liked it. i love watching other youtube videos on stuff like this as well. thanks again 😊
I agree with the climbing channel. true
Hey Chad, thanks so much for sharing this video. I’m going to get one going later this week. Really appreciate your time and effort in putting out such great content for us! So from Bend, OR, be well up in BC and God Bless my friend!
I'm glad you enjoyed the video. Thank you 🙏🏻
WOW I've watched tons of cutting board videos and this is by far the best one. Thank you for this video and keep up it up
I appreciate th kind words and the support. Thank you for watching 🤗
@@ChadPalmer Keep it up my woodworking friend :)
@@ChadPalmer It is by far the best not just saying that. Keep it up my woodworking friend :)
Why can you not mix end grain and the other direction? Is it an aesthetic thing or a technical thing that will effect the actual use of the board?
Muito lindo seu trabalho, parabéns. Sou Marco, da cidade de Castelo, Espírito Santo, Brasil.
🤗👊🏻🙏
WOW... Great video :)
Thanks Steve. Glad you like it
I agree Steve this is one of the best cutting board videos I've watched.
Awesome job Chad! That is a very cool cutting board, I like the brick pattern 👍👍
Thank you Bret I’m glad you enjoyed it. Thanks for watching 😊👊🏻
Did you have any trouble running end grain thru the planer?
Great work! Sorry if this was asked before... how did you keep the Padauk from bleeding into the Maple?
It's so hard to prevent it. No matter what it will bleed a little bit but I wiped it carefully and got ALL the dust off before applying.
Good Work. Clean lines. It would be hard to use
Thanks Tom
What type of glue roller are you using?
Im not sure the exact name I bought it at Canadian woodworkers but you can also find them on Amazon. Here is a link to a similar one. Thanks for watching :)
www.amazon.ca/dp/B077YK6NH1/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B077YK6NH1&pd_rd_w=F8nba&pf_rd_p=2a57199d-cf65-4ff4-a8c5-2c6d2e794176&pd_rd_wg=FRjgG&pf_rd_r=CC3XSGZFZX8ZPH6D9FFP&pd_rd_r=1dcadbab-98ec-4c1f-9f25-4b69e20d0319&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFPRUZWRDVMNlJZM1YmZW5jcnlwdGVkSWQ9QTAwMzQ3MDIxSTYxVjAzNjk5TjNGJmVuY3J5cHRlZEFkSWQ9QTAzNDU5MjAyMFgxNFdYOENTS1ExJndpZGdldE5hbWU9c3BfZGV0YWlsJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Looks great, why cant you use long grain for the2nd glue up? Seems like that would save a step, but you mentioned not to do it.
Thanks. Tgats a great question mixing end grain and long grain with temperature change how wood expands and contracts will cause it to split because it’s expanding and contracting in opposite directions. It deffinetly would save time but I’ve cut corners in the past and paid for it in the long run.
really pretty Would you have the patterns please
Thank you for watching Pierre I'm glad you enjoyed the video. The pattern is the same pattern I used in the video. Are you asking about measurement ? I just want to try my best to answer your question what I'm not always good at doing over the computer.
It's a beautiful cutting board!
Thanks Jim
What size and how much wood did you use for this. Good job!
I can't tell you exactly how much I used.BUT I start with strips 28 inches long inch wide and 2 inch tall. The end result is you usually a 24 long by 12.5 wide and 2 inches thick. You will have to play around in the shop and find what works for you. But general that's what I start with.
:) :)
good work. do you sell these
Thank you 😊
@@ChadPalmer :)
I an only imagine what you paid for that paduak
Hi from the One Handed Maker Australia.
I just discovered your channel and have subscribed.
Great video and fantastic project.
I love the cutting board and contrasting timbers.
Keep up the woodwork and videos.
If you get time check out my latest project.
Regards James
Please stop wearing gloves while operating saws
I took your advice and my next video will be out in a few days. I have to finish the cutting and editing and I did not wear gloves on the tables saw. Question to ask you. I suffer from extremely dry skin and yes i do use O-keef and other creams but I find without gloves my hands slip and I have less control. I also use push stick what helps but any other suggestions I would appreciate.Thanks 👊🏻