The fact that you can use mATX and place the GPU on top + the beautiful design makes this the perfect case for me. The only thing I wish is that the Grater one came in black, please make it happen.
Please create a video for each build level so that you can use the videos as a guide! Then you have instructions for every level! This visual representation would help perfectly to facilitate the assembly for a loaner with such a case size!
@@ncase_official I personally find level 9 the most exciting and this level shows what you can build from this Case! So that would be perfect! Level 9 is also what I personally would want to build!
You Guys need to sort out your restock emails out, I was signed up for notifications using 3 different email accounts for every M2 product. For some reason I checked your site yesterday and managed to get a silver grater M2. I didn't get 1 email to say you had stock. Now I don't care, I can finally plan my build :)
@@alihammad6318 they give you the flat rounded screws and countersunk screws. I used the countersunk ones and it’s very tight. I have the DanA4 currently and it’s better build quality than the Dan. Only thing I would consider is different side panel; you can order the slotted or window kit. The mesh is a little basic compared to the top panel that is machined; but that’s more preference.
@@alihammad6318 very good on mine; better than the Dancase. The mesh screens are decent; id upgrade the side panels for the glass/grated metal if in stock is my only personal change.
Dat front panel cover is genius. I'm calling it front panel dust cover as this, in my mind, is it's primary function. Much needed function, lacking everywhere else. Anyway when will the next batch be available? :P
oh so it comes with a fan bracket included? I bought another one lol. hyped for my m2, just shipped yesterday! m1 was my favorite case got my gf build in it rn. :D
What is the best way to fit in a 3.5" HDD in the standard layout with an mATX and SFX PSU? I'm contemplating getting one but this is the one thing that I'm not sure about just yet.
Waiting for restock right now, tough a question, will shipping to all countries will be available on release, as I tried to pre-order last two batches when they were available but shipping to my country wasnt open?
Is it possible to do Matx build with a side mounted SFX psu instead of front mounted? If not, will the front mounted sfx PSU with matx board be able to get air from the front for intake?
This "front position" you suggest for the flipped configuration is wonky. I'm only getting 1 screw to connect, and even if two do, the whole thing nervously hangs to one side or the other because the two screws are in the exact same side. Plus, I've noticed when you decide to do a flipped configuration suddenly the PSU is moved up 3 screws to accommodate the front I/O without telling anyone Also selling a 1 of the 2 fan brackets as extra is crazy
If only the I/O was flushed with the front panel. This indent breaks the esthetics for me sadly. GHOST R1 on the anther hand has no I/O. Terra has no AIO. Search for perfect case, continues...
The fact that you can use mATX and place the GPU on top + the beautiful design makes this the perfect case for me. The only thing I wish is that the Grater one came in black, please make it happen.
sometimes wish can come true.
it is coming in black i think keep your eyes peeled
It seems like the M2 round silver color will be released soon.
Looking good, really want to use this when RTX 5090 comes out :)
Please create a video for each build level so that you can use the videos as a guide! Then you have instructions for every level! This visual representation would help perfectly to facilitate the assembly for a loaner with such a case size!
Thanks for your feedback and now the pressure is on us! 😂Do you have a favorite yet? 9 level of build will take our team quite a while😵💫
@@ncase_official I personally find level 9 the most exciting and this level shows what you can build from this Case! So that would be perfect! Level 9 is also what I personally would want to build!
I would like to know how you put 2 140mm fans on Level 9.. I assume the vertical gpu bracket will be in the way and you only can put 1 140mm fan
@@ncase_official please do level 9 with good detail. I am aiming for something similar myself when the 5000 series hits 🤞
You Guys need to sort out your restock emails out, I was signed up for notifications using 3 different email accounts for every M2 product. For some reason I checked your site yesterday and managed to get a silver grater M2. I didn't get 1 email to say you had stock. Now I don't care, I can finally plan my build :)
I can't wait to be able to buy one for my next case, any eta on restock ?
can't wait to purchase one of these bad boys. will be putting my sim rig pc into it.
I just received mine today and coming from a monster ATX case to this is drastic… I think it’s going to be a forever case that you can always upgrade
@@madbomer72 can you show us your build?!!!
I really can't wait to get my hands on one of these!
Please make a vertical mount case❤
Yeahhh buddy ive placed my order
just got my black m2 in the mail! planning for a 5090 build with this bad boi after watching optimum tech.
Just curious about the QC on yours for panels and threaded holes and tolerances? Some people have reported QC issues.
@@alihammad6318 they give you the flat rounded screws and countersunk screws.
I used the countersunk ones and it’s very tight. I have the DanA4 currently and it’s better build quality than the Dan.
Only thing I would consider is different side panel; you can order the slotted or window kit. The mesh is a little basic compared to the top panel that is machined; but that’s more preference.
Can't wait to see your build!
@@alihammad6318 very good on mine; better than the Dancase. The mesh screens are decent; id upgrade the side panels for the glass/grated metal if in stock is my only personal change.
Quite simple. waiting to next issure.
Any chance of the silver version coming with silver side panels in the future?
Dat front panel cover is genius. I'm calling it front panel dust cover as this, in my mind, is it's primary function. Much needed function, lacking everywhere else. Anyway when will the next batch be available? :P
TG Soon surely xx
Will it be released as a version instead of having an extra un-used side panel ?
Man I hope the mailing list works lol. I want one.
好帥哦~~~~
oh so it comes with a fan bracket included? I bought another one lol. hyped for my m2, just shipped yesterday! m1 was my favorite case got my gf build in it rn. :D
Yes there is 1 included.
Hoping the silver grater model comes back in stock soon and not "soon". 🤞
I want the white one!
Show us how it looks like from the rear.
Is it possible to fit an MSI 4090 Liquid X (it's dual slot) connected directly to the pci-e of an ITX motherboard while using the radiator on top?
What is the best way to fit in a 3.5" HDD in the standard layout with an mATX and SFX PSU? I'm contemplating getting one but this is the one thing that I'm not sure about just yet.
Waiting for restock right now, tough a question, will shipping to all countries will be available on release, as I tried to pre-order last two batches when they were available but shipping to my country wasnt open?
Can you copy and paste which vertical gpu mount I should get with the m2 the one with the cnc support bracket or the sheetmetal bracket?
Which is better for a vgpu config
When is silver round releasing?
Will this fit two 2.5" 15mm tall SSDs? There is no manual or build on the website that shows 2.5" drive mounts...
Have the front panel wires been extended yet?
Is it possible to do Matx build with a side mounted SFX psu instead of front mounted? If not, will the front mounted sfx PSU with matx board be able to get air from the front for intake?
Can you use both mATX motherboard and power supply?
I hope there is after market na front panel same sa formd t1!
can i place a 280 mm arctic freezer liquid 2 up top or do i need a mount
This "front position" you suggest for the flipped configuration is wonky. I'm only getting 1 screw to connect, and even if two do, the whole thing nervously hangs to one side or the other because the two screws are in the exact same side. Plus, I've noticed when you decide to do a flipped configuration suddenly the PSU is moved up 3 screws to accommodate the front I/O without telling anyone
Also selling a 1 of the 2 fan brackets as extra is crazy
waiting for restock & round silver :)
Update formd t1 please! More gpu clearance and cpu cooler clearance please!!!
Can you show me the temperatures by assembling m_atx board, 7950x3d + air cooler, 4090 non-reference?
When we will get a vertical case?
So I just ordered the M2 grater...where's the power button?
Back of the case
Distribute this in UAE please.. u can choose a specific retailer to work with
It can fit a 4090!!
How can I get one of these? I go on the website and all these dates to get notifications, I don't get any notifications.
You can go on our website and subscribe, will get notified once is back in stock!
I wish they have the Gunmetal color
Will this be available in India
If only the I/O was flushed with the front panel. This indent breaks the esthetics for me sadly. GHOST R1 on the anther hand has no I/O. Terra has no AIO.
Search for perfect case, continues...
Maybe one day you will have stock ...
Still manufactured by Lian li ?
no
Guess the M3 counter sunk screws are not included right? Lmao
It is all included in the package! Except the power supply screws
you can check the manual on the website.
What about restocking the case? 🤔😞😞😞
Did you subscribe the mail?
@@ncase_official yup...but it's been 84 years since the last update 😅👍
@@CarlosGomez-hg4qo Check your mailbox more frequently the next couple hours you might find surprise awaiting.
Out of stock...
Stay tuned, subscribe us