me i try many diods and i find if you put diods with low threshold amp is way better because yr diode start to work earlyer and with less current in to it me i find 3 types and i gained from 3-17 volts from the antena and i use ceramic capacitors for the amount of freacunces if searce the components and see stats what works better for use u will see better ressolts
i use capacitors in paralele with this way i drop the ESR {the ressistance } from the capacitors ={ full small capacity for fast charge } and big voltage name because is thicker the wire inside with this efect u will drop more ressistance thicker conduit = less ressistance again because 16 v capacitor have more ressistance than 1.2kv :}
The one by the power lines is operating by electric field induction off the power lines. The one on top of the barn...hmm. - I think from man made transmissions. -but not matching radio frequencies.🤷🏻♂️
![Hunxho - Ball Forever [Official Video]](http://i.ytimg.com/vi/nki9ZTF9Uls/mqdefault.jpg)
I love watching this channel progress on with experementation. Very interesting
Thank you!
Thank you for sharing. Congratulations, what an amazing innovator you are!
Thank you too!
Thanks brother for the info.
Great stuff, always interesting. Cheers.
Much appreciated
Impressive. Would be good as crystal radio amplifier :) Thanks!
That might work.
Would love to see a low powered micro controller running off the Electro-smog Energy Converter - passively powered computing
Cool stuff. What kind of voltages are you getting off your roof top?
The voltage across the 6 LEDs is 15 volts dc. The open ac voltage without circuit, was around 60 volts with the sensitive meter.
@@doubleMinnovations That's pretty amazing. (I realize that the current is very low. BUT, it is still pretty amazing.).
Thanks for the reply.
needa look into telsas one wire light, usign high voltage ,
Nice! :)
Thank you! Cheers!
high tension overhead ....
if u made half rectifier with 2 diods u will gain 1.2 volts extra and u will drop some sercuit ressistance
me i try many diods and i find if you put diods with low threshold amp is way better because yr diode start to work earlyer and with less current in to it me i find 3 types and i gained from 3-17 volts from the antena and i use ceramic capacitors for the amount of freacunces if searce the components and see stats what works better for use u will see better ressolts
i use capacitors in paralele with this way i drop the ESR {the ressistance } from the capacitors ={ full small capacity for fast charge } and big voltage name because is thicker the wire inside with this efect u will drop more ressistance thicker conduit = less ressistance again because 16 v capacitor have more ressistance than 1.2kv :}
i like yr videos keep creating thinks
try this diodes and se what ressolts u will have
1N4148 . BAT43. 1N34A. DO35.
Yes, I tried many configurations and different diodes. Thanks!
👍🏼😉
Ur capturing radio waves right not atmospheric?
The one by the power lines is operating by electric field induction off the power lines. The one on top of the barn...hmm. - I think from man made transmissions. -but not matching radio frequencies.🤷🏻♂️
looks a bit complicated. I use solar motion detecting lights. they run about 10 bucks each and last a couple years. so far.