Thanks For watching! If you want to see the stick welding demonstration with this machine, please let me know. Please consider clicking my Amazon Store links before making ANY Amazon purchases! It sure helps this channel. Thanks!
Thanks. Yeah there is a lot to cover in this video and I didn't want to make it any longer by putting the test with the stick welder in. It did very well with the stick welder as well
Fine bit of welding there Mike wish I knew how to weld . Think I could do it with this equipment it is the 2nd review I've seen looks like it will do the job !
Speaking of mower decks 😊, I need to get mine off soon for some repairing. I might finally be done with it for the year. BTW, this 19 minute video went quick!
Thanks for watching! I tried and tried to make this video shorter, but there was so much to cover that was pertinent to the details of the welder I had to make it lengthy. I hadn't even added the stick welding capabilities of this machine, but plan to make a follow up showing that as well as the solid core wire, and perhaps a part three showing the TIG functions of this machine. It's a really good bang for the buck at $150 for a machine with this potential.
@@wingnutbert9685 Welp, sort of. When I opened it, there's shrink wrap around everything, and paper bag like brown paper around the neatly spoiled wire, but as soon you take the wire out of the hole in the spool, it unwinds like a spring. When I do the follow up with the solid core spool using gas.. I will try to demonstrate this. Thanks for watching!
@@themostlymikeshow If it unspools, it can sometimes have a bad effect. The wire gets a twist when wound onto the spool and this has to be maintained for it to unspool off and feed through the machine properly. It sounds weird, but it's a real thing and I've had screw me a couple times. Just have to bite the bullet and cut off the unspooled wire to a point it's still tight. At least the off-cut is good for hanging in the paint room.
Thanks for watching. It includes mig wire and a gas hose... However, you need to purchase the gas, and regulators. The machine is set up to use it with the gas solenoid. I will have to make a follow up showing this. I wanted to demonstrate stick welding in here too, but 19 minutes was pushing it for one video.
@ oh ok then , awesome! Yeah I’d love to see how this does with mig welding and I’ll for sure buy one using your code once I watch that video, I’ve been terrribly in need of a small mig welder for the past few months and have been trying to do so much research on which one to get. You’ve got yourself a new subscriber!
@TGLPRODUCT1ONS yes, I'll be curious myself to see how it works with solid core. I might spring for the tig setup as well, although my tig skills are limited. Thanks for the sub!
@ oh , it can tig as well?! Wow! Could you try tigging aluminum in the video too? Because I’m also limited on my tigging skills too but if it does decent then I’m for sure buying this welder, where’d you get it online or Amazon?
Hello dear, I hope you are well. I visited your RUclips channe The Mostly Mike sHOW. Your content is excellent. But your channel isn't growing because your content title and description aren't optimized for SEO and don't have enough ranking tags. This is why no content reaches the top of RUclips. As a result, the SEO score of your video is very low. According to VidiQ, (The video SEO score of your channel is 0 / out of 100, which should be 80+). If you want I can increase it to 80+ which will help your channel grow faster. If you reference your videos correctly, the progress of the channel will bevery soon and subscribers and views will increase. If you want, I can troubleshoot and help you rank your videos better. If you are interested, let me know.
Thanks For watching! If you want to see the stick welding demonstration with this machine, please let me know. Please consider clicking my Amazon Store links before making ANY Amazon purchases! It sure helps this channel. Thanks!
Seems great for the cost!
Thanks. Yeah there is a lot to cover in this video and I didn't want to make it any longer by putting the test with the stick welder in. It did very well with the stick welder as well
Fine bit of welding there Mike wish I knew how to weld . Think I could do it with this equipment it is the 2nd review I've seen looks like it will do the job !
Thanks for watching and the kind words! It's a pretty darn good machine for the money. Highly portable too!
Speaking of mower decks 😊, I need to get mine off soon for some repairing. I might finally be done with it for the year. BTW, this 19 minute video went quick!
Thanks for watching! I tried and tried to make this video shorter, but there was so much to cover that was pertinent to the details of the welder I had to make it lengthy. I hadn't even added the stick welding capabilities of this machine, but plan to make a follow up showing that as well as the solid core wire, and perhaps a part three showing the TIG functions of this machine. It's a really good bang for the buck at $150 for a machine with this potential.
Did that spool of wire come like that???? LOL!!!!
@@wingnutbert9685 Welp, sort of. When I opened it, there's shrink wrap around everything, and paper bag like brown paper around the neatly spoiled wire, but as soon you take the wire out of the hole in the spool, it unwinds like a spring. When I do the follow up with the solid core spool using gas.. I will try to demonstrate this. Thanks for watching!
@@themostlymikeshow If it unspools, it can sometimes have a bad effect. The wire gets a twist when wound onto the spool and this has to be maintained for it to unspool off and feed through the machine properly. It sounds weird, but it's a real thing and I've had screw me a couple times. Just have to bite the bullet and cut off the unspooled wire to a point it's still tight. At least the off-cut is good for hanging in the paint room.
So question is this for just flux core welding or can this also do mig welding?
Thanks for watching. It includes mig wire and a gas hose... However, you need to purchase the gas, and regulators. The machine is set up to use it with the gas solenoid. I will have to make a follow up showing this. I wanted to demonstrate stick welding in here too, but 19 minutes was pushing it for one video.
@ oh ok then , awesome! Yeah I’d love to see how this does with mig welding and I’ll for sure buy one using your code once I watch that video, I’ve been terrribly in need of a small mig welder for the past few months and have been trying to do so much research on which one to get. You’ve got yourself a new subscriber!
@TGLPRODUCT1ONS yes, I'll be curious myself to see how it works with solid core. I might spring for the tig setup as well, although my tig skills are limited. Thanks for the sub!
@ oh , it can tig as well?! Wow! Could you try tigging aluminum in the video too? Because I’m also limited on my tigging skills too but if it does decent then I’m for sure buying this welder, where’d you get it online or Amazon?
MMA.........LOL!!!!!! I guess they only had room for 3 letters so had to make something up other than SMAW.
Hello dear, I hope you are well. I visited your RUclips channe
The Mostly Mike sHOW. Your content is excellent.
But your channel isn't growing because your content title and description aren't optimized for SEO
and don't have enough ranking tags. This is why no content reaches the top of RUclips.
As a result, the SEO score of your video is very low. According to VidiQ,
(The video SEO score of your channel is 0 / out of 100, which should be 80+).
If you want I can increase it to 80+ which will help your channel grow faster.
If you reference your videos correctly, the progress of the channel will bevery soon and subscribers
and views will increase. If you want, I can troubleshoot and help you rank your videos better.
If you are interested, let me know.
Amazing insight for someone who's only been on RUclips for less than a month..........
@@wingnutbert9685 yeah 🤔 kinda raises a bit of suspicion...
@@themostlymikeshow A bit more than a bit! LOL!
@@wingnutbert9685 If you optimize your channel's video SEO, your channel's video views will increase.