Please sir could you help me this video worked but wasn’t all the way informative my email address is redd_antt@yahoo.com you could send me a messege or I’m on Instagram under @tommywiththelocs please could you help me understand the saudering part I don’t know how to do all that melting stuff !
There's a third screw which is located at the golden screw n u had already removed it before hand but u mentioned, resulting me I breaking the screw connector when I pry open the casing....
Yes! please sticky this comment or update the video! Beyond breaking the screw post, one will absolutely mangle the edges and snapin before getting to that point.
My Smooth 4 is starting and shows the full blue led for bathery. But the motors do not engaje. After 5 seconds the red led from batery starts to blink and then it will shot down automaticaly. What is the problem?
It happened to me sometimes too. When it happens, I fixed it by 1. Make sure gimbal power is off 2. Adjust the gimbal and make sure the phone is balanced on the gimbal by itself. 3. Put the gimbal hand back to standby position. 4. Turn it on and use as normal This should fix it. Thanks for waiting and for the comment/question.
Hi, Firstly thanks for the video. The battery link no longer works. Wich battery should I use if I want to replace the batteries in the gimbal? Thanks!
Great instructional video. My Zhiyuan Smooth 4, battery no longer charges. I need to replace the batteries also. Unfortunately, there's no repair store here in California.
1st recalibrate it. 2nd make sure you manually balance the phone on the gimbal before turning it on. Adjust the position of your phone. Phone must be balanced or stay Almost horizontal by itself on the gimbal when the gimbal is off. Gimbal will not support too much unbalance weight.
I am sorry. I did not record or remember how it was acting. If it is older than a year, I would say it could be the battery. You may want to research a bit more to confirm.
Олег Корецкий sorry to hear that. thanks for updating to share and let everyone knows. Is it at least showing charging indicator when connected with the charging cable? Have you checked or post question on Amazon? www.amazon.com/gp/aw/d/B07BHCC3BV/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8#askDPSearchSecondaryView_1595075894829. Might be useful. Emailed the support? (I did once, about a year before I have the battery issue, never got a reply. FYI).
Any 22 or 30AWG wire should work. Please note I don’t know exact size cause I recycle from another device. BNTECHGO 30 Gauge Silicone Wire Kit 10 Color Each 10 ft Flexible 30 AWG Stranded Tinned Copper Wire www.amazon.com/dp/B01M70EDCW/ref=cm_sw_r_cp_api_glt_fabc_8657FY5NKAA4ZYA1313P?_encoding=UTF8&psc=1
@@PeterTech Thanks dude! i was sure it would be on amazon but didn't know what exactly since im not the best at electronics. Does the gauge size matter? thank you once again!
@@PeterTech Also, another question, When soldering is it okay to have the tip of the soldering iron touching the battery/pcb while applying the solder? I'm new to this but i just want to ensure i don't mess up... even if its a stupid question
@@doseofjean it is a valid question. Answer is, it will touch when you soldering. The key is make it as quick as possible. I recommend Practice with something first before doing it. Have fun!
@@doseofjean too small wire may burn or get hot if power drawn is high. And it can increase the resistance (think water pipe) Normally we would concern for large application. For small electronic like this.. I expect low power drawn. That is why I think even 30awg (smaller than 22awg) will do.
Bro, is it possible if i solder direct from battery to circuit board without using wire like u did? Need ur help, my phone is fully charged. But when i turn on power button, its not working. Is it need to replace battery? Hopefully u answer me. Thanks alot
Hi, you may solder it back to the board the way it is from the factory. I feel that it could be harder for me to do that than using the small wires to serialize the two batteries. Sorry that I cannot tell if you have a battery issue. It could be the battery, the switch itself, or any other components.
If I remember correctly, the very bottom light flashing red for a few seconds when turn on and shutdown. I regret didn't take a video of how it was acting.
@@ramazanharmankayame too, i replaced the battery with new battery (voltage and current tested) but it still only turning on for 3 seconds then it stop working and red light appeared.How did you solve your problem?
i feel my gimbal is overheating. I tried balancing it but the heat is there. is this normal? and the gimbal is balancing for minutes and then will not be stable for the next hour
Miguel Hoyle I have to guess. Maybe is was not balance manually with the power off before use? Thus, the motors work harder (create heat) and after a while it will unbalance with amber light at the bottom? Have you manually adjust and balance the phone with power off before use?
I bay your product smoth 4 befor 3 days. And after i use it for 2 time , he can't work, Its engines are not working. And its turne a smal reed lamp At the bottom. Please i want to know what's the problem and how can i solve it
Unfortunately you ruined your batteries if you sold them with Iron solder. Excessive heat of solving will ruin them and shorten their lifestyle. The ideal is to use point solving.
Do you speak english? I'd like to ask a couple of questions about my zhiyun smooth4... I didn't use it that much an in under one year it stopped turning on... I connect it to the charger, it makes the flashing lights, then it tells it is fully chargedm but when I hold the on button pressed nothing happens.... not even keeping the charging cable connected... I was told by the factory it should be the batteries... Do you think that doing this I'll be able to use it again? then again what is the model of the batteries you included?
amaral sanchez if the support told you it is the battery, then it should be. Thanks for the info as I forgot how it was when the battery was bad. Therefore; replacing the battery should help. You are lucky you got response from the support. I have link to the battery in the video description. Thank you
This one should work www.aliexpress.com/item/33048387897.html?spm=a2g0o.productlist.0.0.ca0e42b3Y8zIYP&algo_pvid=4d198345-9721-472c-b58e-99300f7dccad&algo_expid=4d198345-9721-472c-b58e-99300f7dccad-7&btsid=0b0a555816179453457964983ee189&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
i have a smooth 4, and for months ive been trying to get it to work. It has the same red light problem even though its balanced, idk wtf is wrong can someone please help me, ive balanced it, ive researched, ive tried everything, ive charged it and ugh it just wont work, idk what im doing wrong
Not so good didn't show the hidden screw at the base inside the thread that the base screws into. You will see the screw. Easy to damage the cover if not removed.
Thanks, I replaced with same power batteries and it started working again.also did firmware upgrade for more features.
Glad it works for you as well. Thank you !
Please sir could you help me this video worked but wasn’t all the way informative my email address is redd_antt@yahoo.com you could send me a messege or I’m on Instagram under @tommywiththelocs please could you help me understand the saudering part I don’t know how to do all that melting stuff !
@sanket ghatge
What is the maximum mAh for smooth 4?
There's a third screw which is located at the golden screw n u had already removed it before hand but u mentioned, resulting me I breaking the screw connector when I pry open the casing....
What a asshole. Did it break your gimbal? Why make an instructional video then lead people wrong smh
Yep happened to me too. Now trying to patch the broken part back on so the screw will hold.
Yes! please sticky this comment or update the video! Beyond breaking the screw post, one will absolutely mangle the edges and snapin before getting to that point.
Brother, I want to ask you about a malfunction in the engine that comes above smoth 4
My Smooth 4 is starting and shows the full blue led for bathery. But the motors do not engaje. After 5 seconds the red led from batery starts to blink and then it will shot down automaticaly. What is the problem?
It happened to me sometimes too. When it happens, I fixed it by
1. Make sure gimbal power is off
2. Adjust the gimbal and make sure the phone is balanced on the gimbal by itself.
3. Put the gimbal hand back to standby position.
4. Turn it on and use as normal
This should fix it. Thanks for waiting and for the comment/question.
@@PeterTech what if the red light shows up in any condition.
Hi,
Firstly thanks for the video.
The battery link no longer works.
Wich battery should I use if I want to replace the batteries in the gimbal?
Thanks!
Thanks for asking and letting me know. Keyword is 18650 3.7V Battery, such as this one in the link. amzn.to/3jyUK3o
Thanks
Peter Tech thanks!
Great instructional video. My Zhiyuan Smooth 4, battery no longer charges. I need to replace the batteries also. Unfortunately, there's no repair store here in California.
Thanks for watching and for the comment! Feel free to ask if I could help answer any question.
@@PeterTech what is the tool used to remove old sodder? That seems to be the missing element
Thank you for the video, my Gimbal smooth 4 is vibrating and doesn't stand balanced, could you help me how to repair it please.
1st recalibrate it. 2nd make sure you manually balance the phone on the gimbal before turning it on. Adjust the position of your phone. Phone must be balanced or stay Almost horizontal by itself on the gimbal when the gimbal is off. Gimbal will not support too much unbalance weight.
When turned on, the blue scale and battery indicator blinks and does not turn on. What is the problem?
I am sorry. I did not record or remember how it was acting. If it is older than a year, I would say it could be the battery. You may want to research a bit more to confirm.
@@PeterTech Thanks. I will tried to change the battery and write here my result.
@@PeterTech I changed the batteries and the problem remained. It's sad.
Олег Корецкий sorry to hear that. thanks for updating to share and let everyone knows. Is it at least showing charging indicator when connected with the charging cable? Have you checked or post question on Amazon? www.amazon.com/gp/aw/d/B07BHCC3BV/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8#askDPSearchSecondaryView_1595075894829. Might be useful. Emailed the support? (I did once, about a year before I have the battery issue, never got a reply. FYI).
I used this about 3 times. Set it down a while now I have to do all this to get it working again…
How do i get the head on?
Hi! what wires to do i buy to attach to the battery?
Any 22 or 30AWG wire should work. Please note I don’t know exact size cause I recycle from another device. BNTECHGO 30 Gauge Silicone Wire Kit 10 Color Each 10 ft Flexible 30 AWG Stranded Tinned Copper Wire www.amazon.com/dp/B01M70EDCW/ref=cm_sw_r_cp_api_glt_fabc_8657FY5NKAA4ZYA1313P?_encoding=UTF8&psc=1
@@PeterTech Thanks dude! i was sure it would be on amazon but didn't know what exactly since im not the best at electronics.
Does the gauge size matter?
thank you once again!
@@PeterTech Also, another question, When soldering is it okay to have the tip of the soldering iron touching the battery/pcb while applying the solder? I'm new to this but i just want to ensure i don't mess up... even if its a stupid question
@@doseofjean it is a valid question. Answer is, it will touch when you soldering. The key is make it as quick as possible. I recommend Practice with something first before doing it. Have fun!
@@doseofjean too small wire may burn or get hot if power drawn is high. And it can increase the resistance (think water pipe) Normally we would concern for large application. For small electronic like this.. I expect low power drawn. That is why I think even 30awg (smaller than 22awg) will do.
Bro, is it possible if i solder direct from battery to circuit board without using wire like u did?
Need ur help, my phone is fully charged. But when i turn on power button, its not working. Is it need to replace battery?
Hopefully u answer me. Thanks alot
Hi, you may solder it back to the board the way it is from the factory. I feel that it could be harder for me to do that than using the small wires to serialize the two batteries. Sorry that I cannot tell if you have a battery issue. It could be the battery, the switch itself, or any other components.
any idea if the smooth x uses 18660s ?
Sorry, I have no idea.
Can you also do the same with mine gimbal?
รับเปลี่ยนมอเตอร์มันป่าวคับ
ไม่ได้รับครับ
That is the cause that's why my zhiyun redlight indicator appear and shutting down automatic?
Possibly, if you charge for hours and it does not seem to take any charge.
If I remember correctly, the very bottom light flashing red for a few seconds when turn on and shutdown. I regret didn't take a video of how it was acting.
@@PeterTech i have same red light problem, today i changed the battery with the guide of your video but red light error didnt fixed :(
@@ramazanharmankaya conseguiu resolver ? O meu parou hoje também, está com o último led acesso em vermelho
@@ramazanharmankayame too, i replaced the battery with new battery (voltage and current tested) but it still only turning on for 3 seconds then it stop working and red light appeared.How did you solve your problem?
nice video :) what is "the blue pen" you used to detach the batteries?
That is to remove the old solder.
It is used to suck out the tin in the solder
i feel my gimbal is overheating. I tried balancing it but the heat is there. is this normal? and the gimbal is balancing for minutes and then will not be stable for the next hour
Miguel Hoyle I have to guess. Maybe is was not balance manually with the power off before use? Thus, the motors work harder (create heat) and after a while it will unbalance with amber light at the bottom? Have you manually adjust and balance the phone with power off before use?
I bay your product smoth 4 befor 3 days. And after i use it for 2 time , he can't work, Its engines are not working.
And its turne a smal reed lamp At the bottom.
Please i want to know what's the problem and how can i solve it
Good luck. Really Appreciate your hard work..
Thanks a ton
Thank You. More power yeah! I did it!
You are welcome. Thanks for coming back to leave a comment. ^_^
Unfortunately you ruined your batteries if you sold them with Iron solder.
Excessive heat of solving will ruin them and shorten their lifestyle.
The ideal is to use point solving.
Do you speak english? I'd like to ask a couple of questions about my zhiyun smooth4... I didn't use it that much an in under one year it stopped turning on... I connect it to the charger, it makes the flashing lights, then it tells it is fully chargedm but when I hold the on button pressed nothing happens.... not even keeping the charging cable connected... I was told by the factory it should be the batteries... Do you think that doing this I'll be able to use it again? then again what is the model of the batteries you included?
amaral sanchez if the support told you it is the battery, then it should be. Thanks for the info as I forgot how it was when the battery was bad. Therefore; replacing the battery should help. You are lucky you got response from the support. I have link to the battery in the video description. Thank you
If my memory is right. That is what happened. It would tell me the battery was full, then it was not even turn on immediate after.
Bang ada jual batrai crane m2
I like this video, very helpful
Thank you!
WOW, THANK YOU! On a gun pad too :D
Thank you for your video! Can you give link to AliExpress for new 18650 battery? Thank you again!
This one should work www.aliexpress.com/item/33048387897.html?spm=a2g0o.productlist.0.0.ca0e42b3Y8zIYP&algo_pvid=4d198345-9721-472c-b58e-99300f7dccad&algo_expid=4d198345-9721-472c-b58e-99300f7dccad-7&btsid=0b0a555816179453457964983ee189&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
i have a smooth 4, and for months ive been trying to get it to work. It has the same red light problem even though its balanced, idk wtf is wrong can someone please help me, ive balanced it, ive researched, ive tried everything, ive charged it and ugh it just wont work, idk what im doing wrong
Is it just a regular phone? Weight is not more than the support specification.
Hola, mi equipo no enciende, solo enciende las luces led cuando conecto el cargador.
If I were you, I might think it is a battery issue. Just my opinion.
Not so good didn't show the hidden screw at the base inside the thread that the base screws into. You will see the screw. Easy to damage the cover if not removed.
ปุ่มทอกเกิ้ลด้านบนกดไม่ค่อยติดครับ แก้ไขยังไงครับ ช่วยบอกที
เป็นแบบนี้ตั้งแต่แรกหรือเพิ่งเริ่มเป็นครับ ไม่แน่ใจว่าปุ่มอาจจะเริ่มเสื่อมสภาพหรือเปล่านะครับ
พึ่งรู้ครับ ปกติไม่ค่อยใช้mode.phonego
พี่ทำคลิปสอนแกะดูได้มั้ยครับ trigger button
เดี๋ยวถ้ามีเวลาจะลองถอดดูครับ แต่ไม่น่าจะทำอะไรได้มาก น่าจะเป็นปุ่มที่อาจจะหา part ใหม่ไม่ได้ง่ายๆและอาจจะถอดทำความสะอาดไม่ได้อีกด้วย ช่วงนี้แนะนำให้ update firmware and software ไปที่อันล่าสุดก่อนนะครับ
Great video thank you
You’re welcome. Thank you!
you forgot to mention, that there is a screw in the tripod thread….
This looks like a common problem with Smooth devices. The BFN battery is made in China. They cost about $0.33 each. Not a good choice.
Sadly, it is true. I agree with you.
Hello bro help me to repair my smooth 4 gimbal . Its turn up and down . The video is on my channel.
You forgot to mention one screw, so I damaged the device :-(