TFL Hobby Pursuit Speedboat - Setup Tips & Tricks :)
HTML-код
- Опубликовано: 10 сен 2024
- Hello people :) For new speedboat drivers, I shot this video with the how to's and tips on how to set them up :)
Link to the TFL Pursuit in this video: www.banggood.co...
Support the DutchRC Channel:
www.paypal.com...
My Facebook page:
/ dutchrc.adventures
My Google+ page:
plus.google.co...
DutchRC Adventures™.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of DutchRC Adventures. We are not directly affiliated with any of the vendors or manufacturers in this video. DutchRC Adventures is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the DutchRC Adventures film series broadcast on RUclips is intended for entertainment purposes only.
Been a while since I've seen the inside of one of these. Wow, the hardware looks so good and well put together.
+RCSuperPowers Yes sir.. I wouldn't call the hardware competition grade, but for a hobby grade boat, this really is far from bad :)
I like this boat im going to buy one.
Very popular boat / hull indeed :)
You sound like Sean Connery and I love it. Great vid to boot!
:D thanks Matthew! You're not the first to mention that & I'll take it as a compliment :)
Cheers and thanks for stopping by!
I was waiting for Shawn Conner to do a death roll under the boat with fire flames while I watched this video LOL Love the way this guy talks!
+Rich Morgenstein Hahaha thanks brother ;)
Didn't you mean Sean Connery by the way??
+DutchRC Adventures Yes man I couldn't even remember his name lol Last time seen him was when he did THE ROCK lol like 1999 or w/e lol But other then that nice video!
+Rich Morgenstein I actually saw a few oldy 007 movies pass by on TV last week ;) That was some nasty shit by todays standards man :D haha
Hi, great intro on the setup & thank you for the video .X:)0
Thanks Graham! Glad you liked the video :)
Nice Dutch! Man, I have the pro Boat Miss Geico with the rudder directly inline with the drive line and no turn or trim tabs and probably considerably more expensive lol! I like the boat but would be much more fun racing another :) Thumbs up! Cheers Dutch!
+Cadillacstsv06 Thanks brother :)
haha which size of the Miss Geico do you have mate?? A friend of mine had one of those as well.. Very cool boats! :D And well.. a Cat doesn't need trim fins or turn fins :)
Cheers!
thx a lot!! bro for the Tips & Tricks thanks for sharing! 👍👍 ✌
+RC VHX 22 Thanks for stopping by & you''re welcome offcourse buddy!
Cheers :)
Hello, please help! I have a tfl zonda and it won’t go over 30 mph even on 6 s battery. It does the same speed no matter 4,5,6 s battery. I’ve tried it all and nothing over 30mph. What could it be?
hee man.. that IS a strange problem indeed :O I first thought it could be the ESC calibration but it would then at least be Faster at a higher voltage..
I would probably try a different ESC, but even if that helps it would not make sense....
Thank you for the video.
You're welcome :) Thank You for stopping by & commenting
Hot damn, that looks like a nice r/c boat, can't wait for a maiden video. Keep those vids coming bud :)
+eukat3ch That was fast! :D Thanks for stopping by buddy :)
Once the weather clears up over here, I'll get her into the water :)
Hey just curious... what should I use to mount this tlf mount in my boat. I'm doing a custom build with a tigar shark
You speak English very well Sir.
Thanks George ;)
Funny: I also got the exact Opposite remark today :P
Is it possible just to weld the hard shaft and flex shaft so you don't need to remove the strut and just simply take out the whole 1 pc shaft.
Hi there sir :)
well yes that IS possible and I know people that do so.. It is however hard to keep the shaft balanced and one can imagine what an unbalanced shaft would do..
It would be beyond my welding skills :$
What adhesive do they use to attach the motor mount to the fibergalss hull?
2 component epoxy glue is the way to go :)
Hi mate, what lipo connector did it come with? I just ordered the boat and it’s going to take a month to arrive..would like to order the lipo.. thank you!
Halloa :) Mine came with a XT60 connector on the ESC.. I'm pretty sure that is still the case..
Let me know what You think of the boat ofcourse! :)
Thank you for the reply. Great stuff! Thank you for sharing! Can’t wait to get my hands on it. Your videos are great! Makes me more excited!
Hi Dutch rc ! I was wondering if you could help me ? I upgraded to the one piece flexshaft and it seems to be binding somewhere one thing i noticed that there was a buildup of heat around the rear of the strut where the bearing is located the boat is brand new never neen run in water as it is freezing winter here i have also had the motor out and maybe i mis aligned it not sure. Is there a way or trick to realign motor? Cheers steven Australia
Howdy Steve :)
well if there IS a trick to that, I don't know it.. I eyeball it just like you have.. I assume you have the shaft well greased up?
Offcourse you Allso 'miss' the presure of the prop pushing the shaft in a bit. Were you running it dry or in water?
hi, I have one problem with the screws that attach the propeller, I cant remove any of both so I cant take of my shaft, I suspect is becouse of that. I think both screws are grub and I understand that to remove the shaft I need to first take out the propeller screw but I cant becouse its locked.. what do you suggest me to do, or maybe im missing one step, but I dont think so becouse I already take out the motor abd the string. Please helpppp
Howdy! Have you taken off the outdrive-mount? (the vertical plate, with the cylender at the bottom)
Yes.. I think you kinda Are missing something, but understandable if you haven't done it before :) In that cylindrical thing is actually a coupling (and bearings)..
That plate is (as you can see) attached with 1 bolt + screw at the top..
OR.. had you allready done so??
Noo I dont, its my first rc boat so I am a bit lost and moreover.. english is not my fisrt language so I having some headache trying to understund new vocabulary. My main doubt is to know if the screws (both) next to the propeller had something to do with my probem as they’re both locked, if it isnt… can I send you a pic of my boat? Maybe that would make it easier for me
yeah I already remove that bolt and screw but it remains locked
You shouldn't even need to take the propellor off.. Can you completely remove that vertical plate?
nope, the stinger is free but the whole platform (attached to the boat) stil enganched, may I have to take the whole stinger platform? aah and I own a different model than yours I think yours is older im not shure but it is the same sistem becouse I already talked with hobby king support
I'll wait for video of this boat on the water :)
+MikeRC Channel Thanks for watching brother :) It shuldn't be long, now that it's build :)
Thank you very much for this video! I just got my first ever boats and this info is great, could you advise me what best grease to use on the shaft? Cheers 👍🏻
Howdy Phil :)
glad you found the video to be usefull! And yes: MARINE greace.. the blue stuff.. So I don't get that from a hobby-store but from a regular marine supplies store :)
Have fun with the boating business! :D
DutchRC Adventures ok sweet thanks! Spent most of afternoon watching you videos lol great stuff 👍🏻
Hahaha :D Thank You for the support then! Glad you liked the video's :D
No more wooden parts inside the hull ......
New motor, SSS, with water jacket .....
Looks much better like this !!
And now they have a version with Direct Drive system ....
Both versions now in supply , or just the Direct Drive system ???
nice video! lots of good info there and will help anyone who wants to get this boat with little to no boating experience off to a great start. i have limited boating experience so i'm curious what the trim tabs effect will be on the boat. Also wondering why you would want to bypass the motor mount cooling?
ok looking forward to the maiden voyage. should be fun! cheers bud
+Mike's RC Corner Thanks buddt :) Hope you got some info out of it, as I'm pretty sure the setup of your boat will similar :)
Ah yeah.. the cooling bit.. Well that extra cooling block actually doesn't add a Lot of extra cooling.. It does however add extra resistance in the waterflow.. So the nett. effect of it isn't much at all...
Looking forward to it too offcourse :D
Cheers & have a good evening.
This video helped a lot with removing the flex shaft. Do the same steps apply for the TFL Genesis boat?
Good to read it helped you out sir!
Well. I have not owned that boat, but flex-shaft systems are set up the same way on most boats.. So there is a Very good chance it works the same way :)
DutchRC Adventures wait you have the stock flex cable in this video correct?
You could have mounted the receiver & battery in the boat & got it running instead of waffeling on about the self explanatory trim tabs & turn fins 🙄 $300 USD boat No battery No radio & No receiver & it takes a 6s battery Bigger motor & prop to make it real fast❗So it's definitely not RTR but a nice boat nevertheless & I am considering one in the future. Don't much care for the yellow or the skulls so would have to paint it. A variety of colors to choose from would have been a great selling point for this monster🤑
Chiếc nay bao nhiêu USD vây
eeeehh uuummmm uuuuuhhhh and uuuuummm eeeehhhh uuuuuhhhh uuuuuummm
You missed a few ;)