Nissan Cranks But Won't Start
HTML-код
- Опубликовано: 30 сен 2024
- Welcome back to the alternate reality. Today's video is about a 2005 Nissan Sentra that came in on the hook cranking but not starting. It's a sweet ride with an even sweeter stereo so put the children to bed and crank up the volume and enjoy the show! Thanks for watching and please subscribe right now.
Status up date! I had found out that when changing the crankshaft positioning sensor one should also replace the camshaft positioning sensor as well. I had ran the Ecm to check for trouble shooting codes and came up with the code P0340. If this code appears one should replace both sensor. After I changed out the camshaft sensor the car started right up. I want to say thank you for responding, and that I will continue to watch. Thank you again.
Right on!
@@ThecardoctorTVi have a 2006 Nissan Sentra that cranks but takes a long time to start. Is it more than likely the Crankshaft sensor?
Nissian was a better quality vehicle when it assembled in Japan and shipped over to the United States!!!
Good to see you have attended to the blinking concerns. Next please could you make sure you wear pants in all your videos. Many thanks
You're asking a lot you know. Oh wait, I thought you were talking about my"other" video channel. ;)
No lab scope needed. Watch RPM on scan tool while cranking
I found this video.. And is excatly my problem.. Took me 1 hr.. And my car is back on the road.. Thank you so much..
excellent!
I have a 2000 nissan maxima, that takes a couple tries to start. Sometimes i would get lucky and it would start easily. I have took it to a mechanic and they have changed the fuel pump, timing, fly wheel, new battery a few sensors added a ground, starter and still has the same problems.. in need of help !!
Did you find a lasting solution?
Do not worry about those tires , The traction cords will will come out soon and all will be well again . And the ones that get filled with spray foam will not go flat again .
Oh wow, haha. Never heard of that before but expanding foam sounds like a great idea.
This happened to my wife this past weekend at 10pm. Her car stalled and would crack but not start. In the middle of the road. I got there and the first thing I did was check if it had gas. The gauge said it had a quarter tank left. We pushed it to the side called my mechanic. He said push it to the parking lot and leave it there I’ll check it tomorrow morning.
The next day my mechanic checked it and he thought it was the gas pump. He pulled a gas pump out and tried it and it was working. He look at the gas tank and it was empty. He put everything back together again put 2 gallons of gasoline and the car started right up. Moral of the story; never trust your gas gauge on an old car. Always put at least a gallon of gas.
Soooo I tried prying with a screwdriver and snapped the eyelet for the bolt, tried prying with a prybar and snapped more off, tried grabbing whatever I could and prying on the pliers which ended in me ripping plastic out everytime. I have no idea what to do now besides dropping the oil pan and praying that I can reach the back side of this stupid sensor from in the block. I'm considering buying the car from the customer with intent to watch every last bit of it burn to the ground, it will be the first and very last nissan I ever purchase.
Have the same problem on my Nissan Sentra
Don't have spark or injector pulse
Should I replace the crank sensor?
I think if you make a scan to engine ecu itll give you problem in crank sensor but i like to see graph on osscilloscope 😁 but still didnt understand how to read this whether it work or not so if you can explain in depth with another video 😁
HI DOC i have the same car it cranks but wont start .a mechanic told me its the computer box malfunction.....any tips DOC?
Did u get it fixed? I jave the same car 355.000 miles on it lol still really nice though because its been kept up but the crank and camshaft sensor was the problem. We did have to replace the fuel pump amd had to spend like 30 bucls on eBay with a lifetime warranty I believe.
Your mechanic is guessing. You have to realize these issues are resolved by trial and error. It could be your immobilizer...bad key transponder..crank sensor...bad coil.. start there first before changing your module
is there a way to test that crank sensor before I spend money on a part that might not be the problem, I have a 97 Nissan maxima
Probably need a diagnostic tool (hardware device)
Correct
Before I spend anymore Money To try to Get My 97 Nissan Altima GXE 2.4 liter running again it cranks over but wont start on the OBD Test My check engine light stays on has fir along time.It reads faulty p1320,peer I think but actually it reads on the Diagnostic tool when I plug it in crank engine Over its telling me It Won't start or stay running & misfires cuz ignition coil, crankshaft sensor, pigtail connector to the ignition coil was Melted & corroded bad connection, and i put plugs in it & tuned it up & changed ignition coil that aint it.I turn the engine over it cranks but wont start now& before it was running crappy at idle& when im driving over 40 mph it cuts out & dies on the road or hesitates at acceleration.
No worries on the blinking - just love the info! Thanks and hoping this is what is wrong with my Nissan X trail 2006
Hello Tim my name is Xavier, I have 2000nissan maxima, I am getting current to crank sensor, coils,injectors, Ihave a ground to camshaft but no hot going to it, it will start if I Spray STATER Fluid,and I have replace fuel pump twice. What can be the problem?
Crank or cam sensor is most common problem . Do you have pulse to injectors? Have you looked at a scope pattern of these sensors?
have Nissan Central 2001 I Need fine , relay pop Sensor
You have an awesome sense of humor. Great work
thank you
Lol!
Gum underneath the battery
TAHAHAHAHA!!!!!XD when you thanked them for telling you to blink more I just LOST IT!!!XD that was way too funny! Fuck haters they are just jealous you're monetized. Thank you for this my sisters Honda is not working right now and hopefully I am able to fix it with the crank sensor or trying to bypass the alarm system. I know that it will not start if there is an alarm on there but I have not figured out on this 03 Sentra how to reset the alarm so thanks again!!! Have a great day! =)
Tim you are the man! I don't care if you blink or not. Your a great diagnostician. I always appreciate your
videos.
wink wink
😂😂😂
This guy funny😂but I got a 2005 Nissan Altima that cranks won't start will it most likely be a spark plugs or that sensor
I have the same year...it's doing the same thing as yours..
@@CarlosAlmeida-lg7yg i tried replacing the code p0507 and that didn't work no other codepops up
Lol....I like this guy! Professional and funny. Thanks for the knowledge..
Stay positive sir. Thanks again!
You were obviously familiar with the issue. But what would the code have been for this vehicle? Thanks!!!
I have changed it. But still wont start n it only start when i put it in the wrong position
Great video, thanks for sharing. I've had the same issue with my 2005 Nissan Altima. Ive replaced the crank sensor 5 years back, its now turning slow. So i replaced the sensor again. It turned over quicker but now 5 days later its sometimes not starting. I have 220,000km on the timming chain. It's never been replaced. Do you think the chain need replaced? Could it be that the chain is not lining up the crank gear with the sensor?
My 2002 i35 starts and runs fine, but when you turn the car off and try to restart it right away it will not start . If you wait 20mins it will start and runs great with no issues but the problem repeats when you turn the ignition off again . If you removed the battery terminal and reinstall it again the the car will start up right away Any ideas
That is not a bald tire sir' at the limit but not bald some of the ones I have replaced have got the cords showing
And why point out about the battery 🤣
Happened to me, crank but could not start, turn out the issue was on loose connection on the crank sensor, tightened and boom car worked well
I still cant figure out what is wrong with my sentra 05 1.8l I replaced, fuel pump, pligs, boots, crank and tps sensor, I also checked the relays and fuses and they arent blown, i even replaced the ecm. I just cant figure out what is wrong. I hit a deer in the front middle kind of near the left headlight. Replaced the radiator, and fixed a bunch of other stuff, but ordered the wrong fan to the radiator and I found out my uncle plugged the one side in and spliced the other in it and it worked for id say about a week and i noticed it wasnt turning the fan on. I mightve overheated it a little but after that i drove not even a few miles and i was going to drive it so i can get it parked and looked at and it just all shut off while i was driving, it just acted like i just turned the key to acc and it brought up all the lights and i havent been able to get it to spark sense and like i mentioned in the begining I repoaced all those first things after it shut off while i was driving it. Ive been searching and searching for a fix and havent been lucky yet.
I have a 01 Nissan Xterra an it shut off on me on the highway I'm guessing its the crank sensor or something I'm no mechanic still learning
So unprofessional to talk about your customer car in that minor... you can advise him to fix this issues or you can talk shit to yourself but not on the video so everybody can see it.. that was low
Great channel. Love your attitude. I have a 2002 Altima 2.5 The car burns oil (consumes it @ 1 qt every 1000 miles or so). I found significant oil in the spark plug wells. Replace the valve cover gasket. I was told the oil was entering the combustion chamber through worn valve guide seals... Oil burning has killed the Catalytic converter. I can't handle the project in my garage. With only 128K miles!!! Local mechanics tell me piston rings are the reason for the oil consumption. #2 spark plug is definitely dirtier that the others. Any suggestions?
Yes, bu y another car..
I was having the same issue on a 2009 Nissan Rogue SL
After i got a call from my wife saying her car wouldn't start ok so i checked it and it had a good Battery it wanted to start but wouldn't....everything on the car was working....tried jump starting it anyway still nothing i heard it all timing chain...starter...alternator and to me none of that made sense so i took off the wheel and when to work and yes indeed after taking off the belt my wife's car did start up. So i checked the ac pulley and it would not move so i took off the clutch and the bearings to the pulley fell out. The compressor did not lock up the pulley did so it prevented the belt from turning. After replacing clutch and pulley as well as the coil on the compressor everything is back working normally i hope this too help someone because it had me lost for words. Tim you Rock great video keep up the great work.
Was coming home from the market and saw a young couple broken down, They parked and then car wouldnt start, I offered a hand. 2002 Nissan maxima GLE.
He had already installed a new battery and starter still wouldnt start. I came home and youtubed and your vid came up.
We replace the CPS, Strange though. the wire connector would only go on opposite of the clip, was late in the evening and now the stores were closed. We cut off the clip slide on the sensor so we could plug in the wire. still no start.
They called for a ride home and will be back in the morning. I offered to help out as I have all the tools and more experience, tho limited.
Fuel pump working, but no fire from coils.
Can you help me, help them please.
thank you.
2008 Nissan Titan SE 4x4 king cab all 3 cam positioning sensors are knew alo crank sensor knew fuel pump won't cut on and no spark all relays knew well as starter please help turns over good and strong ipdm is knew as well???? Truck has only 93000 miles
Hi I don't know if anyone could help but my husband Nissan note 2014 car started giving trouble a while now, when he press brakes it jerks up also when its on park it jerks, only when he stop and put it on neutral the jerking stops... Now the car wouldn't come on. HELP anyone please. But the way we are from Trinidad and the mechanics don't know much about the vehicle
😂ur video is indeed a horror video for its obscure filming. I couldn’t see anything when you were under the vehicle. Thanks though
The car start right away. I change the spark plug then it stop. It crank. But that all I call 2 mechanic. They say my computer was fk up and it cost. Well money. But. I need more opinions. Of what u guy think it could be. Thanks.
I have 2005 Nissan Altima 2.5L the car crank but no stars no spark in coils no signal on injectors no code scanner shows not connected
E
Ha ha ha ha, you got my laughing this afternoon, Tim. I loved that stereo remark. You know there's a problem, when the stereo is better than the tires in Alaska.
2005 Nissan Maxima 3.5. Won't start. Just replaced crankshaft sensor.
I was a bit concerned about the blinking...maybe just a tad too much now. Appreciate the vid none-the-less.
Thank you for your concerns. Haha.
No communicating on mine 02 Sentra 1.8 the port doesn't work to read codes cel light is on
Not only a great mechanic..but funny as well..i wish you the best!!!
Sir your tires are junk, your battery hold down is gum, but your stereo is badass lol..
kia ora from new zealand . That was very informative.
Tim I hear that duct tape works good to hold down the battery:-)Nice video.
You know I better make a how to vid of that this morning since I still have the wreck, oh I mean car still in the shop.
What's wrong with duct tape?!
Good
My car is doing this. Sometimes it’ll start but sometimes it won’t start at all
Did you replace it or just remove it?
Hi, I will watch this again. I own a 2002 nissan sentra and when it is cold it cranks but doesn't start. When I let it spin for a few minutes it finally does start. Then after running it awhile, I shut it off and it starts up right away. I took it to my local car repair shop and he couldn't find any problems. There is a evap error message though. Any idea what is going on?
Possible evap control issue. Purge or vent valve problem would cause those symptoms. Need to have it tested by someone who knows what to look for.
I had the same problem and I changed it out it still won't start
Next time put what type of Nissan you are talking about mate.
God I replaced my crank sensor n still nothing
I just had a guy replace the crankshaft position sensor on my 2008 Sentra after he got some codes indicating a problem with it. Still no start, and I have no fucking idea what to do next. Mechanic is pretty stumped as well.
Lame
Hi I had a Nissan AD 2015 CVT car only cranks but no start...Fan auto on when you just turn the ignition on... Any ideas why
Any testing done at all?
I have a dumb question.....is the crank sensor the same as the neutral safety switch? Mine would not start today (no crank) but a friend said throw it in neutral and try and it started up. Its a 1996 Altima
No, the neutral safety switch is a mounted on the transmission and usually adjustable to only allow the starter to crank when the vehicle is in park or neutral so that it won't suddenly lurch forward unexpectedly when started. It's possible that this is your problem based on the fact that it started once you moved the shifter. If it continues and you find that after moving the shifter it cranks then it may just need adjusted or possibly replaced. Always possible it is a problem with the starter or ignition switch and it just happened to start when the shifter was moved. Hope you get it figured out.
Bless! Me too! Ive had no luck with used cars the past decade!
Way to ignore your customers...that was me calling
What it your getting both fuel an fire an still no start
I swear to god is this is whats wrong with my nissan I will go pry this fucking sensor off right now. I was abou tto pay and arm and a leg to get my car towed to a mechanic who was gonna charge me 70 just to find this problem and then more to fix it probably would have ended up being around 400 in the hole thank you so much car doctor
Baby Spine what the? Baby spin? Was up bruh use to play paragon with ya. I'm a mobile mechanic bro lmk if u have any problems
REMEMBER THE OPTICAL DIST, FIASCO THEM CAM AND CRANK SENSORS AND NOW CVT'S
yes, sad.
So I got a nissan nv it cranks but no start I ran for codes it picks up every module codes except its not reading the ecm module for codes ... sounds like fuel pump is working can a crank position sensor cause my obd scanner not too read codes for the ecu ?
Possibly. I would start with the powers and grounds paying special attention to the 5V ref circuits. A faulty sensor can take down that module for sure.
I have something interesting for you. 06 Nissan xtrail Cranks over but won’t start. I have zero dash lights headlights signals plus everything else lol. Do you have an idea for that?
Quick response if you can!! thanks so much!
Nice fix buddy now they can have a great drive to the scrap yard. Keep blinkin !!!
Did Eric by chance give you some eye drops for me? I think my pupils are getting chapped.
The Car Doctor OMG Im sure were going to hear something . You can only hit the piñata so many times before it opens up. LOL
I better send him some beer too.
The Car Doctor HAHA he still loves ya buddy.
Tim and Rob, you might wanna toss in some Triple Antibiotic Ointment for those cracked hands of Eric O's. This really does the trick. Tell him to wash his hands clean as he can stand depending on how big and how bad the pain is. I've had some winners in my day for sure. Then put a gob of the Triple Antibiotic Ointment on the area (s) and wrap it completely with a new clean bandaid or bandage for a day.
Remove the bandage before going to work and wash again and reapply. If you get it dirty or torn at rewash and reapply bandages and ointment. Otherwise just change it out for a new bandage every day for two or three days. You'll know when you don't need a bandage cause the crack will completely be closed. Takes a week to really heal. After that - and from now on --- Don't be a fool zero - Be a man Hero and wear the right kind of gloves next time you're messing around using chemicals, or sprays or any dangerous liquids of any kind. Look at this way - Would let your kids play with that stuff? Then don't play with it either.
I know this works because it has worked for me for more then the last 45 years. When I worked on heavy engineering gear (pumps and valves and such) and equipment while in the US Navy for 20 years and again while I worked at an oil refinery as an outside operator for 15 years I would come home with hands so cracked and calloused that i had no feeling in them and they would literally be bleeding slightly when i sat down to eat at the table. They did bleed a lot mind you but any thing kinda freaks out the little ones. My hands felt like the "Thing" on "Fantastic Four". No feeling at all. I could hold hot valves and not know it was burning me unless someone told me or i looked down.
Go... no go... go... no go LOL! The lack of blinking is an illusion due to the camera refresh rate (just like helicopter blades seem to stand still when viewed in a video).
Oh I never noticed that. I should up my frame rate to capture this phenomenon.
Very informative thanks
Thank you so much for your time and good info for me. have a good day pal.
Was the check engine light on when it was brought in?
yes, but its always on when it isn't running
@@ThecardoctorTV 🤣
thanks for the extra blinking brother you're doing a great job. remember ...healthy eyes are happy eyes...
haha
Those aren't bald tires those are drag slicks.
Thanks for making this video, going to try the verus component test on my maxima
I have a 2005 Nissan Altima with a V6 I have no spark I checked two of the coils in the front no spark I do have voltage to the coils with the key on and I also have voltage to the injectors with the key on I did not check for injector pulse cuz I do not have any type of noise light I don't even have a multimeter right now is there any other way to check those crank and cam sensors I have no codes however I understand sometimes the crank sensor will not throw a code. I do have the dongle that plugs into the dash the assembly line diagnostic connector and I have Torque Pro and torque light and I have Carissa and piston and a few other apps is there any way to check the crankshaft position sensor with some type of live live data on the aforementioned apps that I have? Or if I got a hold of a voltmeter can I check the output within digital multimeter set to AC volts? Also does these cars have a ignition module like the dis system on a general motors car?
Good thing this guy dsnt own a laundry mat.
Hi we have a 2002 Nissan Sentra ser spec-v, won’t start but cranks, changed fuel pump, alternator, fuel pump relay, ecm relay, crank shaft positioning sensor. We are out of ideas. Would you be able to give us some ideas?
So funny with the nissan you was working on with the battery just hanging on wish you had an idea to help me I have a 2008 nissan xtrail t31 plenty of crank no start cheers gaz uk
So i have a 99 pathfinder LE,
It cranks but doesnt start. It has no blown fuses, new battery. Fuel pump works. Filter is new. Spark plugs are new. Only starts with starting fluid. Anyone? Thanks in advance.
Great video OK so now for a single mom who just got a car after a long time without someone gifted me a 2004 Nissan Sentra with 140,000 miles it's been a great car I've only had it a month lol but I let a friend borrow it and they ran it almost out of gas and then put I think old gas in it, and it stopped about a mile from their house and even though I went and put fresh gas in it a couple of gallons it cranks, but it just won't start now and I don't know what to do. I'm without a car again with kids and it's cold. Any ideas?
Out of everybody on RUclips i like him the best hes the only one i use now when i have to fix my 🚗
I appreciate that!
I have a 2007 Nissan Altima it's turning over but it's not cranking what you think could be the problem I didn't change my coil packs are my spark plugs
Man me my nissan sentra 2012 did the same thing didnt start no life at all so i took it to guy and he s fucking it up more i see parts wish i could sent them to u
Their around the battery and their kinda plug in wires and metal around it
Battery is not there its removed
Ao its been 3 days now
Hello, my car has the same no start issue too, but the crank sensor seems to be working sense the RPM gauge showing some engine revolutions and the fuel pump is triggered too, but got no spark at the coils, any help please.
That car might have mechanical issues but that mechanic is by far way more broken with that personality issue n all.
Mentions tire then makes it seem like he stands for something (wonder what he's doing there)
but he doesn't have a problem attempting to embarrass the customer over n over.
While he's pointing out issues n making jokes about them he can't help but prove how fucking broken and insecure he is.
My wife's 2009 Nissan Murano has battery/electrical issues. Replaced the battery, 3 times in a year. It may run/start fine for 1 month, or 3 months, then nothing, won't start. If we jump it, it starts right up. Until the next time. The alternator has tested good. Any suggestions is appreciated? Thank you, John G.
Hi Tim. I have an 06' maxima that stopped on me while driving. I've used 3 different mechanics to troubleshoot and fix parts. So far combined they've changed: both valve covers and valve cover gaskets, the pcv valve, all the spark plugs and ignition coils, both camshaft sensors and the crankshaft sensor, the O2 sensor, the mass airflow sensor (I bought two new ones since i was told by the second one it needed to be from Nissan), and as of yesterday, the fuel pump was changed. It did the same thing, start once then cut off almost immediately, never to start again, only crank. Please help.
Man the maxima is a money pit. I have 05 SL. Changed the same stuff as you. My next option is the crank sensor or ignition switch
Have yall tried the immobizer?
Look at this ... I replaced this immobilizer on mine and found a guy with the same computer tool to reprogram it . I showed him this video and we used it to reprogram. There is a guy on eBay that sells used immobilizer for 29 dollars. I bought one and the car ran for a month but now it threw a 0300 random misfire code and won't start again. I hate this car. I hope this might help.
ruclips.net/video/HccLf4b2d5s/видео.html
Mine was an 2001 sentra 1.8 with a transponder in the key. I had someone check if my key transponder was good then i searched and searched and luckily found that video about the immobilizer. I still have crank no start issue tho
Hey good day I'm just curious do you think the Nissan hr15 engine can work in the Nissan lafesta?
Hello Car Doctor;
Thank you for your video. It’s very helpful. I have a 2014 NV 200 and it’s cranking, but it won’t start. It just happened out of the blue. Any suggestions?
I love this car. Even thou a woman I use it as my car for work .. I would appreciate your your thoughts on it
05 sentra 1.8 maybe a couple week sparks on each cylinder . than no sparkp0340 1111 0118 0113, 2122, 2127,0223, o462, camshaft, coolant temp intake air temp throttle switch E,D,B, feul level
u1000 controller are network circuit, code 00 memory backup fail.
bad ecm ? I will be checking grounds, I unplugged maf no change. crank and camshaft sensor ohmed out the same
I tried used ecm from junk yard. by genesis scanner would not communicate with it. no chip in key.
HELP
thanks
What type of meter is the you are using
Robots don't blink. Reprogram your blink rate but not to fast. Thanks for making a video for my old shitty car! My Nissan Sentra not his.😎
+The Car Guy....I have an '09 altima...recently had an issue with the vehicle starting. Was diagnosed that I had a random misfire in cylinder # 4 ignition coil and also had bad fuel in tank.I replaced all four ignition coils.I drove the vehicle for one day after replacing the ignition coils.But this a.m the car would not start but would act as if its trying to turn over.What could be the issue?
Some one is selling a 05 sentra for 600 cash with title says it was running with ac and out of no where stopped running cranks but wont start how much you think it would run to fix
Mine tries to start ….broke down tonight. Been smelling a funky exhaust smell when first starting.
Sometimes it makes me wonder if I should touch the car....with those other problems I wonder if he can afford to pay me.lol.
Does the OBD shows the crank position sensor failing? Yes, no, maybe? And thanks doc for sharing.
Nissan np200 2019 model
Hi my 2004 maxima overheat for hole in a hose when we fix it start the car and run over 2 minutes and shut down itself and don't run any more we check cam sensors and everythings good but no spark on plugs and car alarm is on
Question._ can be the computer or what? Thanks in advance and sorry about my english
Hello!! I got a 2012 Nissan Maxima and it has no lights at all, no instrument panel light. This car with try to start without the smart key but, wont start up. Can you help??
Would this cause the security light to stay on when I try and start it if crank sensor is bad
nope that has something to do with the key or security system you can pull data with a 50.00 Bluetooth OBD II scanner from walmart
ruclips.net/video/HccLf4b2d5s/видео.html
I have an 2003 Nissan sentra that will not turn over. crank sensor and can sensor replaced. fuel pump kicks in... basically everything checked except timing chain. What should I have my mechanic check? Is the engine blown?
Just wondering .. I have an 02 Altima sounded just like that car Cranks .. no Kick .. I recently replaced the Crank Sensor in January so 5 months ago .. Would you tell me that they can be that random to only last a few months and some last forever ? or should i be looking at something else. Relay to the Pump is Clicking The Fuse is good I replaced the Fuel pump just to Replace it and its priming.. Any Suggestions ?
I have this problem right now with an 05 Altima. I replace the cps tonight but it still won’t turn over. I am out of cash and need help.
Do you have a video on a 2015 Nissan Quest SV that won't start? Mine has 57,000 mi. On it and won't start. It tries to stay on but sounds like a misfire. Any clue?
Okay... I don’t know how to do that on my Nissan 05. I wish you would give step-by-step instructions for people that are just not too familiar with cars and currently are too broke it to get it fixed. lol.