One thing we forgot we've taken only lengths and width we must measure hight too thus we can reach to the conclusion.. Sir tell whether I'm right or wrong your valuable reply will be highly appreciated.. Thank and best regards..
Thanx for asking In 3m standard , there are 4 cups which means we can use 4 layers of ladger but basically we use 2 layers of ladger at my construction site. If the hight of floor is 6m we will use vertically 2 standard in which we use 2+2 layer of ladger. In this video I calculated ladger for one layer and then multiplyed the output with the number of layers. I think now I cleared your doubt . If any please ask.
Thanx for asking . We have 20mtr wdth and 50mtr length use 1.550m ladger length for calculation of no of ladger . Now , 20m/1.550 = 12.90 or say 12nos. And 50m/1.550= 32 no's . Now , no of ladger in one layer . (12*32)*2+(12+32) = 812 no's and for 6m height standard 4 layer will use then 4*812 = 3248. Total height where scaffolding required is 20mtr. 20/6mtr = 3.3/ or 18m+2m Here 6mtr 3 standard and 2m 1 standard will use . Therefore 3*3248 = 9744. For 2m standard 2 layer of ladger will required then 812*2= 1624 . Total no of ladger are 11368nos ladgers. And no of standards are (12+1)*(32+1)= 429 *3 = 1287 (6mtr height ) . (12+1)*(32+1)= 429*1 = 429 ( 2mtr height) . LENGTH oF standard will be 1.5m for ordering the material I took 1.550m because standard will cover some space . Again thanx for watching and asking .
Thanx for asking 😇 Mere hisab se thumb rule nhi hai . But apke pass kitne pipes ( standards ) hai wo bataiye . Or kitni row banani bnani hai ye pta kijiye to easily calculate ho jayega ish method se. Again thanx for watching and asking.
Excellent video Sir, thank for sharing this idea. This made it so easy...
Nice sir
Thank you
Thanks for this methods
One thing we forgot we've taken only lengths and width we must measure hight too thus we can reach to the conclusion.. Sir tell whether I'm right or wrong your valuable reply will be highly appreciated.. Thank and best regards..
Thanx for asking
In 3m standard , there are 4 cups which means we can use 4 layers of ladger but basically we use 2 layers of ladger at my construction site.
If the hight of floor is 6m we will use vertically 2 standard in which we use 2+2 layer of ladger.
In this video I calculated ladger for one layer and then multiplyed the output with the number of layers.
I think now I cleared your doubt .
If any please ask.
Heights of the standards should be considered as well.
if am using1.8 or 2.5 or other length is there another formula for that?
In that case distance of directions will be divided by 1.8 or 2.5.
good
is this formula applicable only in 2d prespective?
No
Thanku chacha
Is there any formula for calculating different sizes of ledgers in 1 time?
Say for maintenance job, scaffolding to be erected for outer wall only.
ruclips.net/video/oT7U6eBONZo/видео.html
Sir please click on this link i explained this here.
Sir please subscribe my chennel i already uploaded a video releted to this and for outer wall I will upload video shortly.
Hello sir how did u derived that formula to calculate ledders like x+y+XxY x2 formula can u plz explain
How to calculate verticals required
Subscribe my channel where you can find calculation of standard for scaffolding work.
Sir please can you explain how to calculate Join pin (scaffolding)
Thanks for watching .
Tomorrow you will get the notification about , how to calculate number of joint pin for scaffolding .
Cuplock shuttering me slab height 10ft ho to vertical ki height base jack and u jack se kaiser karate hay
U jack and base jack me chudi bni hoti hai usko kaske ya loose krke height adjust krtey hai .
@@surajsinghnegi2056 sir mai vo to samaj gya liking
Base jack and u jack kitane ka height ka lena vo batayi ye
2.5 MTR ka standard lelo and 400 height base jack and 400 height u jack.
@@surajsinghnegi2056 thank you sir
Most welcome
Sir hindi me bhi vodeo dal dijiye
Bhai i want to get 6mtr pipe material requirement for the following Ht-20mtr,Wdth-20mtr,Length-50mtr.How to calculate?thanks in advance
Thanx for asking .
We have 20mtr wdth and 50mtr length use 1.550m ladger length for calculation of no of ladger .
Now , 20m/1.550 = 12.90 or say 12nos.
And 50m/1.550= 32 no's .
Now , no of ladger in one layer .
(12*32)*2+(12+32) = 812 no's and for 6m height standard 4 layer will use then 4*812 = 3248.
Total height where scaffolding required is 20mtr.
20/6mtr = 3.3/ or 18m+2m
Here 6mtr 3 standard and 2m 1 standard will use .
Therefore 3*3248 = 9744.
For 2m standard 2 layer of ladger will required then 812*2= 1624 .
Total no of ladger are 11368nos ladgers.
And no of standards are (12+1)*(32+1)= 429 *3 = 1287 (6mtr height ) .
(12+1)*(32+1)= 429*1 = 429 ( 2mtr height) .
LENGTH oF standard will be 1.5m for ordering the material I took 1.550m because standard will cover some space .
Again thanx for watching and asking .
भाई साहब हिंदी में बोलते हुए शर्म आती है क्या
ruclips.net/video/jOGkPvxuo7w/видео.html
Kripya ish link pr click kre mene ye video hindi me bhi bnayi hai.
Dhanyawaad.
bhai mujhy thumb rule bataen hmaray pass sirf scaffolding pips hn
Thanx for asking 😇
Mere hisab se thumb rule nhi hai .
But apke pass kitne pipes ( standards ) hai wo bataiye .
Or kitni row banani bnani hai ye pta kijiye to easily calculate ho jayega ish method se.
Again thanx for watching and asking.
WTF THAT VIDEO
What's wrong with this Sir
@@surajsinghnegi2056 total scaffolding Material reqd for 150x80x40 ..(instead of cuplock standard pipes are to b used)???
@@annuverma7052 are you doing scaffolding with clamp and 20' ms pipe.