British tube and fitting scaffolding is the best system in the world. I can't believe how slow this erecting process is. In UK it's a much faster easier and safer process A runner is a ledger A post is a standard A clamp is a fitting Fitting size 7/16 And a swivel handle scaffold spanner or impact drill/wrench. A ratchet wrench looks awkward Braces are the same Planks are board's. Bearers are transoms And spaced at 46 " Ties every 13' sq. Standoffs are rakers and need to be supported every 10' Everyone needs to get a UK advanced scaffolder card Then you have the best card in the world.
I prefer right angles I hate building with bolt clamps, wit right angles all that's needed to secure them In place is a few taps which makes leveling easier. With bolt clamps the threads get damaged which means they seize up and you can't use them, bolts also come loose easier.
Watching made my brain bleed, plank? Post? 'F' me, imagine having to do this on price work 😂 you'll be be on £110's a day 😂😂 I had to give up due to a back problem but yeah best job in the world and would rather tube and fitting over any other system.
Us British are the best scaffolders in the world. If you are advanced scaffolder you can go anywhere in the world and fix but if you have a ticket coming from another country to Britain your ticket ain't worth the paper it's written on and you have to start all over again. Fact..
British tube and fitting scaffolding is the best system in the world.
I can't believe how slow this erecting process is.
In UK it's a much faster easier and safer process
A runner is a ledger
A post is a standard
A clamp is a fitting
Fitting size 7/16
And a swivel handle scaffold spanner or impact drill/wrench.
A ratchet wrench looks awkward
Braces are the same
Planks are board's.
Bearers are transoms
And spaced at 46 "
Ties every 13' sq.
Standoffs are rakers and need to be supported every 10'
Everyone needs to get a UK advanced scaffolder card
Then you have the best card in the world.
I prefer right angles I hate building with bolt clamps, wit right angles all that's needed to secure them In place is a few taps which makes leveling easier.
With bolt clamps the threads get damaged which means they seize up and you can't use them, bolts also come loose easier.
UK tube scaffs are rubbish
Worked with some uk boys over the years very good workers and some are just bloody useless and too tired
Watching made my brain bleed, plank? Post? 'F' me, imagine having to do this on price work 😂 you'll be be on £110's a day 😂😂 I had to give up due to a back problem but yeah best job in the world and would rather tube and fitting over any other system.
I personally appreciate.
Nice demonstration, I appreciated
How long are those standards and diagonals?
Thanks a lot. Brother!
thank you
Very helpful video
Thanks for safety consideration.
Those are bolt clamps not Right Angles, right angles have 2 wedges and 4 steel forks.
It is a right angle bolt clamp. You are talking about a right angle wedge clamp. Both are right angles
very useful and informative
Us British are the best scaffolders in the world. If you are advanced scaffolder you can go anywhere in the world and fix but if you have a ticket coming from another country to Britain your ticket ain't worth the paper it's written on and you have to start all over again. Fact..
What on earth 🌎🌍🌎
What are the materials used?
Diameter of pipes?
Planks width and length?
Right angle Clamps?
Swivels?
Bearers and runners? Please sir?
Tube 50mm, planks are 130mm width Length Upto 4mtr. Right angle can take 600 kgs swivels are non weight bearing clip
@@ruusamson3103230mm
This must be done in the USA cause this is rubbish
A lot of fucking around before you even start the job!
Fit, inch...
Fk hell
Use cm and m!
Ft and inch is better
Worst scaffolding I’ve ever seen
You ain't seen sh!t!
This is awful.
Stick to your simple framework which any I diot can do