S1000XR acoustics insert removal and updated Brentuning flash
HTML-код
- Опубликовано: 29 июл 2019
- The guys at Brentuning have been doing some testing and have pick up additional power on the top end when removing the acoustics insert on the S1000XR. I will also be installing a Sprint filter that has been proven to pick up horsepower, so between these two simple mods you're gaining at least another 5 hp. Not bad!
Man, that popping on decel sounds sooooo good.
Just finished a 2500 mile ride and still can't get enough of this bike. So I look for Cuban. Nice work, mine is all stock cuz I ain't no mechanic. Looking forward to your track days.
I don’t want be a naysayer on the tuned Venturi’s being removed from the airbox but this was a very popular mod on high performance snowmobile engines for years but it was proven time and time again that it reduced intake velocity and power. The flow of air gets dirty in the airbox.
Nice video as usual! My same tires rear danced but only getting on them on and on-ramp not on backroads at above 30mph though
You did it, as usual man. Mis más sinceras felicitaciones compadre desde España.
Good stuff Cuban,be safe and have fun at your track day. Since your new to the suit I will off you a bit of advice for making it MUCH BETTER. Check out a one piece under suit like the PsycleSkins at STG. It's a lifesaver over 2 piece wicking gear.
Hey Cuban, sold my fjr 1300 last night . I am not touring and also hurt my back no more 650 lb bike. Now it’s xr shopping time . Sounds like me on a sv with clipons on track so alien . Have fun . Just realized been riding from 2004 and I am slow. I use tdj Facebook group to get track gear .i fin q4 on the sv and they are glued.think it’s the power .
It sound sooo good
Great channel! Don't use Dunlops tires they are slick. Especially when your tread depth gets down below 40%. That's my experience anyways, I use Michelin or Bridgstone. Stay safe, keep the videos coming.
the q3s need to be heated up to have grip, they're hard and slick cold. The bridgestones warm up fast and have better cold grip. Drop the PSI on the q3s they like to be run low. I used to run mine 30F 28R
The race suit is tight because you’re swelling up in the Texas heat! Good luck at the track, hope you’ll post some video of it!
That wheelie at the start is insaneeee, also interesting to see how easy it is to change the airfilter on a bike that the service is in excess of 500 bucks for lol, makes you think, I know my ninja 650 needs tank removal, old Yamaha needed pretty much all fairings removed and then the fuel tank cover, then the actual fuel tank and then it was way down there, Also do you wheelie with DTC on? That's maaad leaving an s1000RR behind like that while wheelieing in his face lol
Have you tried Diablo SuperCorsa on the XR? Had the Q2 in the past and makes it easier to set the bike for the angle but never fully trusted them. Switched to Pirelli and feel so different and I trust them completely since then, best tires for me.
Hola amigo !
Agree about Anakees. I have replacements on order $308 total. What do you suggest? Please reply! Doing it Saturday.
How fast were u going on that last fly-by run? WOW!
Is that exhaust oem? Sounds good.
Where did you get the plastic replacement for the rear?? The rear luggage holder
Air those tires down. Especially at your track day. Congrats on the absolute steal on the One Piece Leathers! Bummed you sold the DRZ-SM, but if it just sits around... like mine. I just can't bring myself to sell it. Can't wait to enjoy the track day vid - but you never told us what your new 'Track Bike' was!!! You just teasing us?
Hey cuban you should try the Adjustable pegs they sell on the dealership as a performance part, are they any good for clearance? great video!