How to install steering wheel controls-aswc1
HTML-код
- Опубликовано: 17 ноя 2017
- Get the best price on your ASWC1 HERE!!!!!! amzn.to/3r8BpuE
I had to install a jvc DVD touchscreen with back up cam and integrate steering wheel controls so I decided to show a vid on how to install the aswc1 in a 2008 Honda pilot
WHAT TO WATCH NEXT:
WHICH WIRE HARNESS SHOULD YOU BUY FOR YOUR CAR: • which car stereo wire ...
HOW TO WIRE A RADIO: • Car stereo wiring harn...
HOW TO STRIP A WIRE • How to strip your wires
HOW TO PLAYIST: • how to
🔻
Want to support the Channel? Join me on Patreon and get exclusive content and GIVEAWAYS
www.patreon.com/bePatron?u=43...
🔻
~Check out my first channel if you love BASS~ / jpsaudio08
~Tools I Use almost everyday~
Install bay panel removal tools: amzn.to/2Jv4XiP
Install bay Speaker tester amzn.to/2LHOYki
Digital Multimeter: amzn.to/2Hcz111
Milwaukee drills: amzn.to/2Lxvu1y 
Авто/Мото
![MURDER DRONES Series Finale [TRAILER]](http://i.ytimg.com/vi/p6mhC5Iatns/mqdefault.jpg)
You did a GREAT job of explaining this switch,,I searched for DAYS!!!!!!!!!! tryin to get an explanation on WHERE ALL the wires go,,,I figured it out yesterday and my harness is now complete,,,,,Then i find your vid today,,,,WELL,, These F*&ckin companys selling this stuff need to do a video JUST like yours to help people.....You did a great job,,,,I`m sure it will help others down the road
Thank you I did it for those exact reasons
@@jptheinstallguy Well i have an update,,,,,,After alll the connecting,,,,,and going over everything,,,I get NOTHING,,,,no blinkin lites,,,,no radio,,,no nothing and i followed alll the colors wire to wire,,,,2008 saturn aura
@@mrcoz1764 I just looked up your car and it says that the PAC SWI-CP2 works best for your car steering wheel controls. But either way do you have the white/green wire to ground and yellow/green to pin11 on the 14pin harness and while programming did you hold the volume upbutton?
@@jptheinstallguy Yes I did follow instructions on that PDF and ALL my connections are soldered,,,I kept a grn pigtail that i hooked to the dash,,,,,although even though it`s metal,,,,not sure if it`s grounded,,,My question is,,,,,,Dont you HAVE to have power for anything to work????? I got NOTHING
coz yes you are right. That's weird if you got 12v on red and ground the black you should have the red/green led flashing if not you may have a bad module try to reset it by sticking something in the second hole and holding that button for 5 secs also there should be a USB slot on the front might need to be updated although that wont stop it from coming on
This is the second video of yours I've watched this week to clear up poor instructions from a manufacturer. Your video and explanations do exactly what I need: provide specific content, and demonstrate in a way that is extremely easy to follow and duplicate. Thank you for sharing this information!
That's what I'm here for brotha. Sometimes brand write the instructions for installers and it's like you need a degree to understand it and I Use to have a hard time with it cause I'm a visual learner so I'm just trying to help and I'm glad the vids are helping others🤜🏽🤛🏾💯
Just the video I was looking for.
I'm installing one on an 04 Tahoe Z71 later today and you made it look fairly easy.
Thank you. 😎
Thanks a LOT!!! Found my steering wheel control a few weeks ago and had no idea what it was until i ran across this video.. Now im definitely gonna apply to one of my vehicles soon....#GREATLY WORDED AS WELL #MORE VIDEOS PLEASE
I gotchu bruh I'll keep them coming
Nice looking wire setup there man. Very well done.
Thank you so much, tryin' to get this done on newer models that this AWCS-1 hasn't been tested with is a struggle if you don't know where to look.
That's an excellent clip. Job well done. You did a great job explaining everything. I have an older Ford Focus which doesnt have steering wheel controls but I reckon I can get the stalk out of a junkyard and install it myself, rather than just changing the steering column out. I like my steerring column and trust the controls on it because they are in perfect condition. I wouldnt trust a used steering column as much so I would rather just add a new control stalk to my exsisting unit, if it's possible. It shouldnt be too hard.
FYI to everyone else, I tried to use the plug coming off the steering wheel that was the same colour as "pin 11" thinking it would save me from splicing into the main radio harness.. long story short. Just follow what the man shows you here!
Good job buddy thanks for the video it was very helpful.
thanx jp...got my kenwood steering wheel controls back in my a3
Good job, explained everything very clearly.
Enormous help! Thank you!!
would be great if you showed the wiring process
I mean, he does a really good job of explaining everything. He even shows you the wires after it’s connected together explaining what he did. Why do we need to show him soldering wires?
There’s no use as every car has different colors for different things. Their website says how to
@@revit4909funny I randomly come to this video and this comment is only a day old lol, hoping to get it working for my car it didn’t work last time for some reason, had to order a new harness
Thank you so much I was really confused on what the 3.5mm female connector was for. Now it makes since because I'm installing a Kenwood double din in my s550 mustang.
bro! i love you man! this the best video out there, much love!
Thx man this help a lot was looking a few day for solution..supa😎
Great job! Thanks for sharing!
Thank You for posting this video tutorial !
I have a 2006 Toyota Avalon Limited with the JBL Premium Radio that I just installed a Pioneer AVH 1300NEX Double DIN via a TYTO-01 with a ASWC-1 and I had no steering wheel controls.
NO WHERE IN THE INSTRUCTIONS, 2 " TECHNICIANS " at Axxess, or the 2 guys on here with similar installs told me to reset the ASWC-1 to recognize the radio and the car !
Thanks to you the controls work now !
Love Ya man !!!
hey rusty. i'm about to do the same to my lexus. (2005 ES 330) with premium sound. besides power and ground and the 3.5 jack. which one did you have to hook up to the tyto-01 harness? green white? to orange swc on tyto-01 ? please help :)
if you have the tyto-01 it should be pre wired for swc
Thanks Broooo...nicely detailed...well spoken
Great video JP - finally someone showed that more than the volume control works. I have one of these sitting on the shelf for my Mercedes SL with a Kenwood double DIN. Will the phone controls work too?
OUTSTANDING info - THANK YOU
Glad I could help
nice vid!!
Awesome job
Great video and thank for the quick tutorial👍👍👍👍👍
No problem 👍
Thanks for the vid bro! I'm about to try this on my '16 Mitsubishi Lancer...🤞🏾🤞🏾🤞🏾
No problem 👍good luck bruh
my brother. you are a god send. appreicate this vid
Anytime man
Thanks alot bro
Good video
Man, thaks for your help!!!
no problem
Wow...I have a Kenwood and would not have had the extra piece for the jack if I had not watched! Thanks
Hey JP. Im trying to install the ASWC1 on my 06 Equinox using a Pioneer AVH-210EX Radio. I have followed the instructions clearly on the vehicle specific instructions from Axxess’ website and have had no success. I go through the programming process and get a Red & Green slow flashing light at the end... Please Help !!
Hi! When you installed this aftermarket head unit did the subwoofer stop working or you need another harness so it worked? Thanks
THANK YOU - YOU'RE AWESOME!!!
appreciate the love
Thank you for the guide!
No problem at all
Hey, I saw your video looking for a answer, i do now if you can help me.
I bought a Kenwood DMX125BT for a Dodge 2014, someone told me that a Radio Pro 4 interface could help but the radio does not have a Jack 3.5 receptor. Could I use a female jack as the one that you used for this stereo?
thanks, for your help
I have a question when you hooked up that radio. did you hook the swc wires from the radio to anything
What if I don’t have a blue/yellow wire on the back of my kenwood is there a different wire I can use?
Well done, man :)
Glad I could help
Great video this harness works good on my scion xb 2013??
What harness do you recommend for a 2008 chevrolet silverado so that the controls of the wheel and the microphone work
Hi Jp great and informed video's. I do have a problem with my 2007 Grand prix aftermarket radio. I does not have steering wheel controls but I did put an interface in for the purpose for the radio on and off and the chimes. When I turn the key on sometimes the radio will turn on and sometimes it wont. It is a roll of the dice if the radio will turn on with the car. Any help would be appreciated. Thanks
If you but the Metra kit for a 2011-14 Dodge Charger and u also have this item. Do you just use the Module and plug it in the Metra Wire harness or add more wires to make it work?
I need help with my 06 cts I got the interface and really don't care for the steering control I need help with connecting the interface to the radio wire harness
Man thanks for the video, I'm having trouble installing on a 98 ford explorer limited witch mach sound. I'm using a pioneer radio
I have a 2006 a4 and there are 3 seperate wiring diagrams for it shell 7 pin , shell 11 pin and just shell How do I know which to use without yanking out the existing radio first
Please Help! I just installed an aftermarket stereo to my 2011 Nissan Altima 3.5 Sr, everything works except for the steering wheel controls. I’ve a NSBT-BP (Bluetooth Bypass) but I can’t find the Bluetooth Module locations to connect it. Please Help. Thanks.
Hello in what car did you install the radio with the steering wheel controler interface? Because I have 2014 Jetta tdi sedan and bought pioneer AVH 1400NEX 6.2”
hey good i have a suzuki escudo jeep japan specjust about thesame as the suzuki grand vitara 2008 what is the proper wire connection in the escudo wait for your respond
Thank you
If I am getting rid of my navigation system in my Honda, would the instructions still be the same? I am replacing it with a different screen/system.
Will this work for a 2010 Honda Accord EX - L.
I have an after market pioneer radio installed in my Nissan Sentra 2018 can’t get the steering wheel controls to work I’ve installed the steering wheel module also resistor nothings working
You still doing this stuff man I’m working with a pac-pro2 this is very confusing because it says on the site red and white on the pac sight but the diagram says red acc wire so what one do I use the module should light up it sees the radio and the car but then it won’t stay green so I can programmed the buttons
Hi my friend, i like install a ASWC-1 but, i lost the manual. i Have connect wire black to groung and red to electric terminal controlled by ignition switch (12VDC) ON/OFF and 3.5mm jack connect to the RADIO Pioneer AVH-Z9250BT (R/W Cnectector). please can you help me? i need know where connect the cable Yellow/Green color - Positive SWC. Thank you
A guy from geek squad ordered for me a PAC wire harness for my SONY XAV AX3000 but they cant make the handsfree link work on my 2016 honda crv lx. Should i try the axxess instead?
the only thing I have on my steering wheel is cruise control and i'm wonder if I don't use the interface will that make the cruise control not work?
Thank you very much.
No problem
What is "Chassis Ground" that the black wire on the radio harness? Mine says "Connect the Blackof theASWC-1 AND the wire in Pin 6 of the vehicle’s radio harness shown,to Chassis Ground." What does that even mean, I connect two wire to the same ground?
Do I need this to hook up an aftermarket radio in a 2002 chevy trailblazer with bose and onstar?
On my toyota camry 07 i dont understand how to install the same device on mines u know can u do a video of a toyota camry 07 for steering wheel control device so u can show how to install it myself i have the same device i as yourself
Have you ever installed the asexual-1 installed on Acura RDX with a KENWOOD head unit and got it to work? I’m trying to install one on my 08 RDX technology Package and no success to get it to work. Ty in advance for any help.
I know this is an older video, but have you tried it on a 2012 Subaru outback 2.5l
What's the tape your using please ?
Do you do custom work....can I have contact ? I have a 2005 Scion xB and just got a momo steering wheel with controls .... and wonder if I can find someone to do it ...
The OWNICE 500+ radio don’t need that interface. Because are integrated in the aftermarket radio wire Key 1 and Key2 and Key ground. Nice radio in my 2008 Honda Ridgeline.
Great video verbally explained well keep up the great work man!
Thanks man
Hey JP I have a question for you I have the same axxess steering control that you are showing in this video. I am installing it in my 2011 Ram 1500 the radio is a Kenwood 372 bt I have a radio harness that i ordered on ebay but it doesn't have the red wire for accessory and crutchfield said i needed the correct harness that also control my manufactured amp so they sold me this CRUX SOOCR-26 Radio Replacement Interface harness for Select Chrysler/Dodge/Jeep Vehicles. Do I actually need both of them? or Can they both work together or can I send back either one? Thanks, Shawn
Great work Team, your Instructions helped me out. Do you have something on an 03 Denali?
Tahoe
Good job u made that look easy. Question does the aswc1 make the phone steering wheel controls and factory microphone work as well so I don't have to use the microphone that came with my pioneer
it should keep the phone buttons active but you will have to use the external mic from the pioneer
What is the name of the cord you use for the Aux cord
good lookin out bruh
Anytime
would this work with android head units like JOYING?
How do you install this to a aftermarket radio
Hello, i did this and it works perfect for a while, after a few months i found that the steering controls doesnt work all times. Sometimes it works and sometimes it doesnt at all. Do you think the item is malfunction? Or wrong connection? TIA
It might just needs to be updated on the sec black box you can remove the small door and see a usb hook up in which you can plug it into the computer and update the firmware from the axxess website
What if you don't have a blue/yellow wire for the brown wire? It's a jvc
Great job thanks for making this video 👍👍👍
DO YOU STILL HAVE TO BU A STANDARD $7 HARNESS ON TOP OF THAT
I’m getting Solid Red at the end but my controls still aren’t working, any ideas?
me too
Can use on a Toyota OEM stereo?
the coooooooontent
I have a 2006 nissan armada and I follow his instructions and hook up my android radio which have sw1 and sw2 without any radio interface successfully
Where do u tap into the power and ground? would it be best to do it in the aftermarket harness or into the factor harness ?
aftermarket is fine. thats where i always get power from
Bro please help! I have a Toyota Corolla 2015 I have everything down I’m connecting a CarPlay blaunpunt Indash and the only jack it has I believe is the anta one, what can I do?
Check the harness sometimes the harness has the swc connection on it or it has 2 wires that says key 1 and key 2 in which you would use those for the swc
JP I watch your videos a lot. so I bought this economic radios cause I sell cars. They doubled the $50 ones they come with an extra remote for the steering I have a brown wire for steering where do I connect that one to
i'm about to do the same to my lexus. (2005 ES 330) with premium sound. besides power and ground and the 3.5 jack. which one did you have to hook up to the tyto-01 harness? green white? to orange swc on tyto-01 ? please help :)
if you have the tyto-01 harness it should be pre wired for swc with this exact model so it shouldnt be any installation. just plug and play
@@jptheinstallguy i thought that too but it doesn't work. do i hold down the volume down button to try to reset it or?
I'm installing aftermarket touchscreen radio to 01 Lexus LS430... do I automatically need a steering wheel control kit?
if you want to keep the steering wheel controls then yes.
Ok. Thanks
Me podrás ayudar en mi Toyota Corolla 2016 Gracias
Kenwood said you can plug into the i/r on the back of kenwoods
Does anyone know the difference between this hardness and the $96.00 gm31 hardness? I have a 2012 Silverado.
ok so this is the aswc1 harness and it is only for steering wheel control set ups for select cars. your pac gm31 harness is the full wire harness for wiring up the radio and having the built in steering wheel controls just but turning the dial on the module to program them for the radio you have. some cars dont need the full pac harness so this is another option to retrain controls
@@jptheinstallguy awesome, thanx for the reply.
Some pioneer stereos has the 3.5mm port now
What about Boss radios? That’s what I just bought but I don’t see it on the list
This will work on boss radios
Is this product will work for Honda elysion?
Yes
I went to the site you mentioned but I did not find the step by step for Honda elysion
I missed the part where you installed the controller keypad on the steering wheel.
Why can't u just add the wire onto the aftermarket harness that comes with the jvc,pioneer,sony,Kenwood etc .splicing into the factory wire harness ummm idk about that imo. What I'm saying is that if the factory harness has a wire in #11 spot and the aftermarket harness is empty in #11 spot just insert the wire in that spot.
SO CAN I NO LONGER USE MY 3.5 MM JACK FOR AUDIO IN?
Not the same jack. The one used is not audio in. It's located in the back of the unit and is for wired remote only
On my Pioneer SPH-DA120, it's labeled W/R (Wired Remote). If you don't have a plug, you have to use the adapter that comes with the controller.
Jeff Wagg thank you for this info( w/r)!! I was lost on witch jack to plug into
Wish u would have showed the whole process....
Good video...
Just hoped to see how u tied in.
Thanks though.
ruclips.net/video/7Kq-93DVjOM/видео.html hey here is a video i recently did to let you know how to strip and tap into wires. hope this hleps
Where did the blue one come from. Please show all wires before you tape them
i can't the mfking wiring manual for my car 2014 honda civic
The new JVC 750 BT has a 3.5 mm Audio In but also has the steering wheel wire. This video 2 years old so I guess some things have changed since then.
There us only 1 option for steering wheel controls. Jvc and kenwood will have a blue wire w/yellow strip for swc. The 3.5 is for aux input only
@@jptheinstallguy it has a Audio in and Audio out. Darn, so I cant use those? I thought 1 was for the Aux and the other was for steering wheel?
@@chukwuemekaonyema2716 no sir...lol those are for aux only. kenwood and jvc are the only mainstream brands that use a single wire for SWC alpine,pioneer,sony all use the 3.5
@@jptheinstallguy You was right. My JVC had Audio in but not AUX in which is what I needed. I bought a Toyota specific harness and connected brown to blue/yellow as you suggested and everything worked after programming.
any one install aswc1 in a g35 infinity
CONNIE HARPER don't do it