Idk if anyone has said this before, but you DO NOT have to remove the glove box. When u open the glove box, on each side there's just two little stops that hold it up. All u have to do is squeeze the sides on the glove box in a little bit so the stops are free, and then u can just let the glove box hang down and u will be able to unscrew that screw on the bottom right of the stereo.
THIS IS HOW YOU ACCESS THOSE SCREWS ON THE LEFT! FOR ANYONE PISSED OFF AT THE UP-LOADER WHO DOESN'T WANT TO FIGURE IT OUT THEMSELVES, READ THIS. You have to unplug the hazard light connector, and unscrew the screws that hold in the climate control system onto the frame. Basically there are three screws, one on the top and two on the bottom of the climate control system (By climate control system I mean the beige box that's preventing you from accessing the screws for the radio). The two on the bottom are easy to get to if you have a short Phillips screw driver. The first one is connected to the front-bottom of the frame (the black face of the frame), and the second one is connected to the back bottom of the frame (the metal portion of the frame). Those ones are easy as fuck to get compared to the top one. Make sure you've unplugged all of the connections for the climate control and the hazard light connection or it will be impossible to get to the top screw, that one was a real mother fucker. There are three climate control connections you need to unplug, and then the hazard light connection which you have to pry off with a flat head. The hazard light connection has a little grey portion that is connected to a blue portion connected to a black portion. Pry the grey portion from the blue portion and you're good to go. Once those four connections are gone, it should be relatively easy to access that top screw. After removing the climate control system, you will see the remaining two screws for the radio.
Thank you for posting this instructional video. I have removed Honda radios before and I think they make them hard to remove intentionally, perhaps to discourage a thief.
Forgot to mention on the LEFT side of the Stereo the Climate Controls and and emergency wires would be in the way. It easily added on an additional hour and a half by the time I figuered out the way that worked best for me to remove the final two screws. For those of you with the same problem I simply got a wrench, I believe the size was 5/16 or the third smallest one if you have a set and began tediously unscrewing the screw. Although it took awhile I did not have to find a way to unplug the climate controls which was taking me even longer. Other than that, Great instructional video. P.S - Don't worry about getting those two final screws back in, your new radio will not need any of the screws that you unscrewed from the stock radio.
Additionally the black slot that came out easily for him will more than likely not come out easily for you. Or at least it did not for me seeing as it was screwed in to the unit above it. I wouldn't worry about taking it out in the beginning, didn't make a tremendous difference. All it did was allow ease in removing the head unit from the dash, it can easily be done using a flat head screwdriver.
+Matt T. THIS IS HOW YOU ACCESS THOSE SCREWS ON THE LEFT! FOR ANYONE PISSED OFF AT THE UP-LOADER WHO DOESN'T WANT TO FIGURE IT OUT THEMSELVES, READ THIS. You have to unplug the hazard light connector, and unscrew the screws that hold in the climate control system onto the frame. Basically there are three screws, one on the top and two on the bottom of the climate control system (By climate control system I mean the beige box that's preventing you from accessing the screws for the radio). The two on the bottom are easy to get to if you have a short Phillips screw driver. The first one is connected to the front-bottom of the frame (the black face of the frame), and the second one is connected to the back bottom of the frame (the metal portion of the frame). Those ones are easy as fuck to get compared to the top one. Make sure you've unplugged all of the connections for the climate control and the hazard light connection or it will be impossible to get to the top screw, that one was a real mother fucker. There are three climate control connections you need to unplug, and then the hazard light connection which you have to pry off with a flat head. The hazard light connection has a little grey portion that is connected to a blue portion connected to a black portion. Pry the grey portion from the blue portion and you're good to go. Once those four connections are gone, it should be relatively easy to access that top screw. After removing the climate control system, you will see the remaining two screws for the radio.
thanks for the video. i had the stereo out in about 5 mins. had everything back together in about 5-10 mins as well. haha the inbetween took a while. i cant believe the scosch wire harness didnt come pre stripped.
I just bought a Dual XHD7714. Will I still need to buy a wiring harness and dash kit, or will the wiring harness included suffice? Thanks for the tutorial, much appreciated!
Correct if wrong, but don't you have to completely remove the climate control panel, to get to the screws on the right side of the radio? Also, how did you remove the wire harness from the back of the radio? I have been trying, but can't get it out, it's stuck in there good
Man I've watched like 15 vids of civic around 2000. All have the vertical knobs. I got a European model with the knobs horizontal. It's held in tight by 2 cables for the climate system
I'm about to do a radio install on my 2k Civic. I'm also installing a sirius sat. radio tuner...where do you think would be a good place to mount the tuner. Its about 4*4 inches.
The 2000 model is the same as the 1999 model right? and if I purchase a different radio (not the same honda stock radio) is it still the same way installing it vice versa or would it be completely different?
Walmart sells a Sony radio for 130 that I just bought today. It has a lot of features and I'm gonna put it in later this week but its supposed to have really good sound quality.
this is my problem right now... the final 2 left screws on the harness. the heating and cooling housing is in the way! how to you get those last 2 screws out?!?!?
One of my buddies installed a radio in for me, but now my turn signals, hazard lights aren't working. The fuse looks fine, but i don't know jack about the wires behind the radio so i'm not sure what to do. I'm not trying to shell out a buck fifty for a shop if it turns out its just a plug that isn't plugged in. Any tips?
dang I have to do all that! I just wanted to take out the stereo i have now so I can put in an aux cord into the back. Do I still have to do everything?
My 1999 Civic DX just has a radio, it doesn't have a CD player built in or tape player and also the backlight doesn't work anymore on it so I can't see the clock or anything in the radio display. Might upgrade but then higher chance of a breakin
The last 2 screws to remove radio on the left side are blocked by the wiring to the heating controls and hazard light switch. I cannot reach those screws.
Please help!!!! I am removing the stereo, i removed the right side 2 screws but when i come to the left there is a plastic cover over the a/c compartment preventing me from getting to the two screws on the left. ALso i cannot remove the hazard light cord. on the left of the panel.
Does anyone else realize you can just open the glove box, push/pinch the outsides of the glovebox towards the inside enough so that u can bend it paste down this knob so it will go down all the way?
this video helped me so much dude i did this to my gfs car this thing is a fucking pig. i got a 2001 civic lx easy as hell but this theres so many screws and plugs and to much bull shit
This kid has no idea what he is talking about. First he tells you to take two screw drivers and pry out the glove compartment below the radio, wrong its held in by two screws, and so goes all his incorrect instructions. BEWARE and run from this.
Dude. .."fairly easy"?? That black slot at the very beginning of the video is impossible to take out. It comes out about a millimeter and en snags in something. Did you use a knife or something?
THIS IS HOW YOU ACCESS THOSE SCREWS ON THE LEFT! FOR ANYONE PISSED OFF AT THE UP-LOADER WHO DOESN'T WANT TO FIGURE IT OUT THEMSELVES, READ THIS. You have to unplug the hazard light connector, and unscrew the screws that hold in the climate control system onto the frame. Basically there are three screws, one on the top and two on the bottom of the climate control system (By climate control system I mean the beige box that's preventing you from accessing the screws for the radio). The two on the bottom are easy to get to if you have a short Phillips screw driver. The first one is connected to the front-bottom of the frame (the black face of the frame), and the second one is connected to the back bottom of the frame (the metal portion of the frame). Those ones are easy as fuck to get compared to the top one. Make sure you've unplugged all of the connections for the climate control and the hazard light connection or it will be impossible to get to the top screw, that one was a real mother fucker. There are three climate control connections you need to unplug, and then the hazard light connection which you have to pry off with a flat head. The hazard light connection has a little grey portion that is connected to a blue portion connected to a black portion. Pry the grey portion from the blue portion and you're good to go. Once those four connections are gone, it should be relatively easy to access that top screw. After removing the climate control system, you will see the remaining two screws for the radio.
Idk if anyone has said this before, but you DO NOT have to remove the glove box. When u open the glove box, on each side there's just two little stops that hold it up. All u have to do is squeeze the sides on the glove box in a little bit so the stops are free, and then u can just let the glove box hang down and u will be able to unscrew that screw on the bottom right of the stereo.
THIS IS HOW YOU ACCESS THOSE SCREWS ON THE LEFT! FOR ANYONE PISSED OFF AT THE UP-LOADER WHO DOESN'T WANT TO FIGURE IT OUT THEMSELVES, READ THIS.
You have to unplug the hazard light connector, and unscrew the screws that hold in the climate control system onto the frame. Basically there are three screws, one on the top and two on the bottom of the climate control system (By climate control system I mean the beige box that's preventing you from accessing the screws for the radio). The two on the bottom are easy to get to if you have a short Phillips screw driver. The first one is connected to the front-bottom of the frame (the black face of the frame), and the second one is connected to the back bottom of the frame (the metal portion of the frame). Those ones are easy as fuck to get compared to the top one.
Make sure you've unplugged all of the connections for the climate control and the hazard light connection or it will be impossible to get to the top screw, that one was a real mother fucker. There are three climate control connections you need to unplug, and then the hazard light connection which you have to pry off with a flat head. The hazard light connection has a little grey portion that is connected to a blue portion connected to a black portion. Pry the grey portion from the blue portion and you're good to go. Once those four connections are gone, it should be relatively easy to access that top screw.
After removing the climate control system, you will see the remaining two screws for the radio.
Thank you for posting this instructional video. I have removed Honda radios before and I think they make them hard to remove intentionally, perhaps to discourage a thief.
Forgot to mention on the LEFT side of the Stereo the Climate Controls and and emergency wires would be in the way. It easily added on an additional hour and a half by the time I figuered out the way that worked best for me to remove the final two screws.
For those of you with the same problem I simply got a wrench, I believe the size was 5/16 or the third smallest one if you have a set and began tediously unscrewing the screw. Although it took awhile I did not have to find a way to unplug the climate controls which was taking me even longer.
Other than that, Great instructional video.
P.S - Don't worry about getting those two final screws back in, your new radio will not need any of the screws that you unscrewed from the stock radio.
Additionally the black slot that came out easily for him will more than likely not come out easily for you. Or at least it did not for me seeing as it was screwed in to the unit above it.
I wouldn't worry about taking it out in the beginning, didn't make a tremendous difference. All it did was allow ease in removing the head unit from the dash, it can easily be done using a flat head screwdriver.
But how do you remove the heating/climate controls so you can GET to those driver side radio screws?
+Matt T.
THIS IS HOW YOU ACCESS THOSE SCREWS ON THE LEFT! FOR ANYONE PISSED OFF AT THE UP-LOADER WHO DOESN'T WANT TO FIGURE IT OUT THEMSELVES, READ THIS.
You have to unplug the hazard light connector, and unscrew the screws that hold in the climate control system onto the frame. Basically there are three screws, one on the top and two on the bottom of the climate control system (By climate control system I mean the beige box that's preventing you from accessing the screws for the radio). The two on the bottom are easy to get to if you have a short Phillips screw driver. The first one is connected to the front-bottom of the frame (the black face of the frame), and the second one is connected to the back bottom of the frame (the metal portion of the frame). Those ones are easy as fuck to get compared to the top one.
Make sure you've unplugged all of the connections for the climate control and the hazard light connection or it will be impossible to get to the top screw, that one was a real mother fucker. There are three climate control connections you need to unplug, and then the hazard light connection which you have to pry off with a flat head. The hazard light connection has a little grey portion that is connected to a blue portion connected to a black portion. Pry the grey portion from the blue portion and you're good to go. Once those four connections are gone, it should be relatively easy to access that top screw.
After removing the climate control system, you will see the remaining two screws for the radio.
Yeah... The poster didn't help. Much on this part.
thanks for the video. i had the stereo out in about 5 mins. had everything back together in about 5-10 mins as well. haha the inbetween took a while. i cant believe the scosch wire harness didnt come pre stripped.
I just bought a Dual XHD7714. Will I still need to buy a wiring harness and dash kit, or will the wiring harness included suffice? Thanks for the tutorial, much appreciated!
how did it go?
thanks a ton man, just got a new stereo for xmas.
Correct if wrong, but don't you have to completely remove the climate control panel, to get to the screws on the right side of the radio? Also, how did you remove the wire harness from the back of the radio? I have been trying, but can't get it out, it's stuck in there good
for the left final screws of the radio, the AC controls will not let you get to the screws
thanks for the vid! the install/uninstall complexity has helped me decide to get it done at a shop. thanks. now, i wonder how much they'll charge.
Man I've watched like 15 vids of civic around 2000. All have the vertical knobs. I got a European model with the knobs horizontal. It's held in tight by 2 cables for the climate system
I'm about to do a radio install on my 2k Civic. I'm also installing a sirius sat. radio tuner...where do you think would be a good place to mount the tuner. Its about 4*4 inches.
Thanks man all i need is the serial number off my radio but this should help me find it
The 2000 model is the same as the 1999 model right? and if I purchase a different radio (not the same honda stock radio) is it still the same way installing it vice versa or would it be completely different?
Walmart sells a Sony radio for 130 that I just bought today. It has a lot of features and I'm gonna put it in later this week but its supposed to have really good sound quality.
this is my problem right now... the final 2 left screws on the harness. the heating and cooling housing is in the way! how to you get those last 2 screws out?!?!?
One of my buddies installed a radio in for me, but now my turn signals, hazard lights aren't working. The fuse looks fine, but i don't know jack about the wires behind the radio so i'm not sure what to do. I'm not trying to shell out a buck fifty for a shop if it turns out its just a plug that isn't plugged in. Any tips?
Thnx for the video, compadre, I'm hoping it will help me tomorrow.
dang I have to do all that! I just wanted to take out the stereo i have now so I can put in an aux cord into the back. Do I still have to do everything?
I unscrewed those four screws underneath the radio and it did not slide out. What do u do after those four screws?
My 1999 Civic DX just has a radio, it doesn't have a CD player built in or tape player and also the backlight doesn't work anymore on it so I can't see the clock or anything in the radio display. Might upgrade but then higher chance of a breakin
how do you get to the screws on the left where the knobs are for the heater and a/c
Thanks for the info. Helped out a lot! Made it easier, time to upgrade stock stereo! Thanks again!
thanks man i almost busted some shit then had to come check online for a video thumbs up .
Same as below..heating/hazard panel in the way...cant pull on the hazard harness cuz its too small..what do i do??
@Rockanimal777 is it only for a specific kind of 2000 Civic? I have an EX Coupe
How do you get the final diver screws ? The ac stuff is in the way. Any help?
The last 2 screws to remove radio on the left side are blocked by the wiring to the heating controls and hazard light switch. I cannot reach those screws.
thanks for the help, the box on mine couldnt come out, it was held by screws.
Please help!!!! I am removing the stereo, i removed the right side 2 screws but when i come to the left there is a plastic cover over the a/c compartment preventing me from getting to the two screws on the left. ALso i cannot remove the hazard light cord. on the left of the panel.
Hahahaha hahahhahahaa I fucking got those two screws out. The AC is blocking. Using a set of plyers and moving them half a millimetre at a time
could i do this to a honda civic 1999, 2 door coupe.....
@Ashley miller I'm having the same problem ...I guess they really did make it anti theft
You left out the part where you take the 2 screws out on the other side unfortunately and thats where I'm having a problem
Does anyone else realize you can just open the glove box, push/pinch the outsides of the glovebox towards the inside enough so that u can bend it paste down this knob so it will go down all the way?
There's 2 more screws on top of the cigarette lighter this shits hard af sweating balls here
Thanks very much for the helpful video.
Dude. Thank you. You rock and so now I can too!
What if your wires are cut?
Thank u man.. Help a lot
Helped alot!
can someone helpme ?
i got an 2000 acura el and i dont know how to remove the stock radio
Nice helpful video, thanks.
Thanks this actually helped a lot.
You also could have maybe showed how to remove the plugs on the left side :/
this video helped me so much dude i did this to my gfs car this thing is a fucking pig. i got a 2001 civic lx easy as hell but this theres so many screws and plugs and to much bull shit
thank you for the good informative video.
couse i want to install this radio check it out ( POWER ACOUSTIK PD-931NB 9.3") and tell me if it fits.....thx alot
Dude the climate controls are in the way, how do you remove them
u dont have to do all that, all u need to do is take the two screws that are located under ur stock radio then the panl should pop right out.
I cannot get that box out from under the radio.
Thanks dude!
its use full to those who have a double din dash
thanks so much for this
thank you very much!
Fuckin Thank you!!! looked alot nd i didnt find anythin gud untill this video!
This kid has no idea what he is talking about. First he tells you to take two screw drivers and pry out the glove compartment below the radio, wrong its held in by two screws, and so goes all his incorrect instructions. BEWARE and run from this.
it helped a lot thax bro :)
Thank you!
Thank you
99-01 are the same!
Bro thanks for the video but it is too much to remove the stupid stereo .
thank you!!!!
Dude. .."fairly easy"?? That black slot at the very beginning of the video is impossible to take out. It comes out about a millimeter and en snags in something. Did you use a knife or something?
There are 2 screws below the black slot bro, he failed to mention that at very beginning
Thanks dude I almost ripe apart the f#$%&*... Stereo..hahaha thanks again...!! :)
nice shoes
Why no one talks about to how disconnect the fucking emergency button cable ???
liar
THIS IS HOW YOU ACCESS THOSE SCREWS ON THE LEFT! FOR ANYONE PISSED OFF AT THE UP-LOADER WHO DOESN'T WANT TO FIGURE IT OUT THEMSELVES, READ THIS.
You have to unplug the hazard light connector, and unscrew the screws that hold in the climate control system onto the frame. Basically there are three screws, one on the top and two on the bottom of the climate control system (By climate control system I mean the beige box that's preventing you from accessing the screws for the radio). The two on the bottom are easy to get to if you have a short Phillips screw driver. The first one is connected to the front-bottom of the frame (the black face of the frame), and the second one is connected to the back bottom of the frame (the metal portion of the frame). Those ones are easy as fuck to get compared to the top one.
Make sure you've unplugged all of the connections for the climate control and the hazard light connection or it will be impossible to get to the top screw, that one was a real mother fucker. There are three climate control connections you need to unplug, and then the hazard light connection which you have to pry off with a flat head. The hazard light connection has a little grey portion that is connected to a blue portion connected to a black portion. Pry the grey portion from the blue portion and you're good to go. Once those four connections are gone, it should be relatively easy to access that top screw.
After removing the climate control system, you will see the remaining two screws for the radio.
There are blue and brown connectors in the back of the bottom dash, connecting to the radio. Could you explain unplugging them?
Thanks a lot, it really helped.
Thank you